Toshiba Portégé M200 User Manual page 144
Toshiba personal computer m200 user's manual
Hide thumbs
Also See for Portégé M200:
- Maintenance manual (325 pages) ,
- User manual (250 pages) ,
- Resource manual (76 pages)
Table of Contents
Advertisement
User's Manual
This procedure does not affect the settings.
Use hot keys.
1. Hold down F12 and boot the computer.
2. The following menu will be displayed with the following icons: Built-in HDD,
CD-ROM, FDD ( or SD memory card), Network (LAN), PCA (ATA) card boot.
NOTE: A bar will appear only under the selected device.
3. Use the left/right cursor keys to highlight the boot device you want and press
Enter.
NOTES: 1. If a supervisor password is set, the menu above does not
appear when you use the user password to start the
computer.
2. The selection method above does not change the boot
priority settings in HW Setup.
3. If you press a key other than one of those above or if the
selected device is not installed, the system will boot according
to the current setting in HW Setup.
HDD Priority Options
This option sets the priority for booting the computer from the HDD. Select from the
following settings:
Built-in HDD
PC Card
Built-in HDD
NOTE: If a boot command is not found on the first detected HDD, the
system will not boot from the other HDD. It will search the next device in
the boot priority for a boot command.
7-4
PC Card (Default)
The computer will look for the Built-in HDD first, next the
the PC Card (Default).
The computer will look for the PC Card first, next the Built-
in HDD.
- Quick Links:
- Hardware
Hide quick links:
Advertisement
Table of Contents
