hit counter script
Toshiba Satellite P200 Series User Manual
  1. Manuals
  2. Brands
  3. Toshiba Manuals
  4. Laptop
  5. Satellite P200 Series
  6. User manual

Toshiba Satellite P200 Series User Manual

Toshiba laptop user's manual p200
Hide thumbs Also See for Satellite P200 Series:
Table of Contents

Advertisement

Quick Links

See also: Maintenance Manual , User Manual
Satellite P200/Satellite Pro P200
TOSHIBA
Satellite P200/
Satellite Pro P200 Series
User's Manual

Advertisement

Table of Contents
loading

Related Manuals for Toshiba Satellite P200 Series

Summary of Contents for Toshiba Satellite P200 Series

  • Page 1 Satellite P200/Satellite Pro P200 TOSHIBA Satellite P200/ Satellite Pro P200 Series User's Manual...
  • Page 2 © 2007 by TOSHIBA Corporation. All rights reserved. Under copyright law, this manual cannot be reproduced in any form without the prior written permission of TOSHIBA. No patent liability is assumed, with respect to the use of the information contained herein.

  • Page 3: Safety Instructions

    AC adapter while it is inside a carrying case. ■ Use only the AC adapter and batteries that are approved for use with this computer. Use of another type of battery or AC adapter may risk fire or explosion. Satellite P200/Satellite Pro P200...
  • Page 4 Before you clean your computer, turn if off, unplug it from its power source, and remove the battery. ■ Handle components with care. Hold a component such as a memory module by its edges, not its pins. Satellite P200/Satellite Pro P200...

  • Page 5: Fcc Information

    Use only the battery pack that came with the computer or an optional battery pack. Use of the wrong battery could damage your computer. TOSHIBA assumes no liability for any damage in such case. FCC information Model Name: Satellite P200/Satellite Pro P200 Series FCC notice "Declaration of Conformity Information"...
  • Page 6 Only peripherals complying with the FCC class B limits may be attached to this equipment. Operation with non-compliant peripherals or peripherals not recommended by TOSHIBA is likely to result in interference to radio and TV reception. Shielded cables must be used between the external devices and the computer's or expansion unit's external monitor port, parallel port, USB port and microphone jack.
  • Page 7 Regulation of the Canadian Department of Communications. Note that Canadian Department of Communications (DOC) regulations provide, that changes or modifications not expressly approved by TOSHIBA Corporation could void your authority to operate this equipment. This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
  • Page 8 In other countries, the drive is certified to comply with the requirement pursant to IEC 825 and EN60825 on class 1 laser product. This computer is equipped with one of the optical drive in the following list according to the model. viii Satellite P200/Satellite Pro P200...
  • Page 9 ■ To prevent direct exposure to the laser beam, do not try to open the enclosure. Satellite P200/Satellite Pro P200 Location of the required label SERIAL NO. MANUFACTURED: COMPLIES WITH FDA RADIATION PERFORMANCE STANDARDS, 21 CFR SUBCHAPTER J.
  • Page 10 To prevent direct exposure to the laser beam, do not try to open the enclosure. Location of the required label SERIAL NO. MANUFACTURED: COMPLIES WITH FDA RADIATION PERFORMANCE STANDARDS, 21 CFR SUBCHAPTER J. CLASS 1 LASER PRODUCT LASER KLASSE 1 TEAC CORPORATION 3-7-3 NAKA-CHO, MUSASHINO-SHI TOKYO, JAPAN Satellite P200/Satellite Pro P200...
  • Page 11 ■ To prevent direct exposure to the laser beam, do not try to open the enclosure. Satellite P200/Satellite Pro P200 Location of the required label SERIAL NO. MANUFACTURED: COMPLIES WITH FDA RADIATION PERFORMANCE STANDARDS, 21 CFR SUBCHAPTER J.
  • Page 12 Location of the required label SERIAL NO. MANUFACTURED: COMPLIES WITH FDA RADIATION PERFORMANCE STANDARDS, 21 CFR SUBCHAPTER J. CLASS 1 LASER PRODUCT LASER KLASSE 1 TOSHIBA Samsung Storage Technology Korea Corporation 416, Maetan-3Dong, Yeongtong-Gu, Suwon City, Gyeonggi-Do, 443-742, Korea Satellite P200/Satellite Pro P200...
  • Page 13 ■ To prevent direct exposure to the laser beam, do not try to open the enclosure. Satellite P200/Satellite Pro P200 Location of the required label SERIAL NO. MANUFACTURED: COMPLIES WITH FDA RADIATION PERFORMANCE STANDARDS, 21 CFR SUBCHAPTER J.
  • Page 14 Location of the required label SERIAL NO. MANUFACTURED: COMPLIES WITH FDA RADIATION PERFORMANCE STANDARDS, 21 CFR SUBCHAPTER J. CLASS 1 LASER PRODUCT LASER KLASSE 1 Panasonic Communications Co., Ltd. 1-62, 4-Chome Minoshima, Hakata-Ku Fukuoka, Japan Satellite P200/Satellite Pro P200...
  • Page 15 ■ To prevent direct exposure to the laser beam, do not try to open the enclosure. Satellite P200/Satellite Pro P200 Location of the required label SERIAL NO. MANUFACTURED: COMPLIES WITH FDA RADIATION PERFORMANCE STANDARDS, 21 CFR SUBCHAPTER J.
  • Page 16 VAROITUS. Suojakoteloa si saa avata. Laite sisältää laserdiodin, joka lähetää näkymätöntä silmilie vaarallista lasersäteilyä. CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED IN THE OWNER'S MANUAL MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. Satellite P200/Satellite Pro P200...
  • Page 17 It has not been tested for conformity to national type regulations, and no guarantee of successful operation of that specific function on specific national networks can be given. Satellite P200/Satellite Pro P200 VORSICHT: DIE VERWENDUNG VON ANDEREN STEURUNGEN ODER EINSTELLUNGEN ODER DAS DURCHFÜHREN VON ANDEREN...

  • Page 18: Region Selection

    The Ringer Equivalence Number (REN) of the modem, which can vary. For the REN of your modem, refer to your computer's user's guide. The modem connects to the telephone line by means of a standard jack called the USOC RJ11C. xviii A05-0413001 Satellite P200/Satellite Pro P200...

  • Page 19: Type Of Service

    When you are notified, you will be given the opportunity to correct the problem and informed of your right to file a complaint with the FCC. In the event repairs are ever needed on your modem, they should be performed by TOSHIBA Corporation or an authorized representative of TOSHIBA Corporation. Disconnection...
  • Page 20 Ringer Equivalence Numbers of all the devices does not exceed 5. 3. The standard connecting arrangement (telephone jack type) for this equipment is jack type(s): USOC RJ11C. The IC registration number of the modem is shown below. Canada: 4005B-DELPHI Satellite P200/Satellite Pro P200...
  • Page 21 - e.g., accessing the Internet requires suitable software in addition to a modem. ■ This equipment shall not be used in any manner which could constitute a nuisance to other Telecom customers. Satellite P200/Satellite Pro P200...
  • Page 22 Before reporting such occurrences as faults, please check the line with a standard Telepermitted telephone, and only report a fault if the phone performance is impaired. xxii Satellite P200/Satellite Pro P200...

  • Page 23: General Conditions

    Please take notice that unauthorized copying, modification, assignment, transmission and disposition may be subject to claims for damages and penalties. Satellite P200/Satellite Pro P200 xxiii...

  • Page 24: General Precautions

    General Precautions TOSHIBA computers are designed to optimize safety, minimize strain and withstand the rigors of portability. However, certain precautions should be observed to further reduce the risk of personal injury or damage to the computer. Be certain to read the general precautions below and to note the cautions included in the text of the manual.

  • Page 25: Instruction Manual For Safety And Comfort

    Instruction Manual for Safety and Comfort All important information on the safe and proper use of this computer is described in the enclosed Instruction Manual for Safety and Comfort. Be sure to read it before using the computer. Satellite P200/Satellite Pro P200...
  • Page 26 Satellite P200/Satellite Pro P200...

  • Page 27: Table Of Contents

    Special features ........1-8 TOSHIBA Value Added Package ......1-9 Utilities and Applications .
  • Page 28 When Using Ulead DVD MovieFactory® for TOSHIBA ..4-30 TOSHIBA Disc Creator....... . 4-32 Media Care.
  • Page 29 Hardware and system checklist......9-3 TOSHIBA support ........9-18...
  • Page 30 LCD Brightness and Eye Strain ......10-4 Appendix A Specifications Appendix B Display Modes Appendix C AC Power Cord and Connectors Glossary Satellite P200/Satellite Pro P200...
  • Page 31 This manual tells how to set up and begin using your Satellite P200/Satellite Pro P200 Series computer. It also provides detailed information on configuring your computer, basic operations and care, using optional devices and troubleshooting.

  • Page 32: Preface

    Manual contents This manual has ten chapters, three appendixes and a glossary. Chapter 1, Satellite P200/Satellite Pro P200 Series Features, is an overview of the computer's special features, utilities, and options. Chapter 2, The Grand Tour, identifies the components of the computer and briefly explains how they function.

  • Page 33: Conventions

    DISKCOPY A: B: Display Satellite P200/Satellite Pro P200 When procedures require an action such as clicking an icon or entering text, the icon's name or the text you are to type in is represented in the type face you see to the left.

  • Page 34: Equipment Checklist

    Carefully unpack your computer. Save the box and packing materials for future use. Check to make sure you have all the following items: Hardware ■ Satellite P200/Satellite Pro P200 Series Portable Personal Computer ■ Universal AC Adapter and Power Cord ■...
  • Page 35 The system may not function properly if you use drivers that are not pre- installed or distributed by TOSHIBA. SD Memory Card Format Utility and other SD functions are packaged into TOSHIBA SD Memoory Utilities. When uninstalling the SD utilities, click Start Control Panel Memory Utilities.
  • Page 36 Preface xxxvi Satellite P200/Satellite Pro P200...

  • Page 37: Features

    Basic features are described in a separate pamphlet. Some of the features described in this manual may not function properly if you use an operating system that was not pre-installed by TOSHIBA. Features Please visit your region's web site for the configuration details of the model that you have purchased.
  • Page 38 Slot L2 Cache Video RAM Satellite P200/Satellite Pro P200 Series Features ® Mobile Intel 945GM/PM, 943GML Express Chipset T1 CardReader & 1394a Controller PCI8402...
  • Page 39 RTC Battery AC adapter Floppy Disk Drive devices Satellite P200/Satellite Pro P200 Satellite P200/Satellite Pro P200 Series Features 1MB Flash ROM for system BIOS Suspend to memory or hard disk drive Various Hotkey functions for system control Complete ACPI 1.0b functionality 6-cell Lithium Ion smart battery pack with 10.8V*4000mAh...
  • Page 40 For more information on the Disclaimer regarding HDD Drive Capacity, please refer to the Disclaimers section in Chapter 10. Satellite P200/Satellite Pro P200 Series Features A TouchPad/Dual Mode Pad and control buttons in the palm rest enable control of the on-screen pointer.
  • Page 41 DVD Super Multi drive supporting ± R Double Layer Satellite P200/Satellite Pro P200 Satellite P200/Satellite Pro P200 Series Features Some models are equipped with a full-size CD- RW/DVD-ROM module that lets you record data to rewritable CD/CD-RWs as well as run either 12cm (4.72") or 8cm (3.15") CD/DVDs without...
  • Page 42 TV Out Multimedia Sound system Headphone jack Satellite P200/Satellite Pro P200 Series Features This slot lets you easily transfer data from devices, such as digital cameras and Personal Digital Assistants, that use flash-memory. You can use a memory module in this slot.

  • Page 43: Security Lock Slot

    Wireless LAN Bluetooth Security Security Lock Slot Satellite P200/Satellite Pro P200 Satellite P200/Satellite Pro P200 Series Features A standard 3.5 mm mini microphone jack enables connection of monaural microphone input. Record/Send still or video images with this integrated Web Camera.

  • Page 44: Special Features

    Special features The following features are either unique to TOSHIBA computers or are advanced features, which make the computer more convenient to use. Hotkeys Display Automatic Power off Hard Disk Drive Automatic Power Off System Automatic Sleep/Hibernation Keypad Overlay Power-on Password...

  • Page 45: Toshiba Value Added Package

    ■ Do not remove the battery pack while the computer is in Sleep mode. Data in memory will be lost. TOSHIBA Value Added Package This section describes the TOSHIBA Component features pre-installed on the computer. TOSHIBA Power Saver TOSHIBA Button...

  • Page 46: Utilities And Applications

    TOSHIBA Assist DVD Video Player TOSHIBA ConfigFree ConfigFree is a suite of utilities to allow easy 1-10 Satellite P200/Satellite Pro P200 Series Features This utility supports the following functions, ■...
  • Page 47 This utility is contained the setup module of TOSHIBA Disc Creator. You can boot TOSHIBA DVD-RAM Utility from the menu bar as follows. Start -> All Programs -> TOSHIBA -> CD&DVD Applications -> DVD-RAM Utility. This program lets you customize your hardware settings according to the way you work with your computer and the peripherals you use.
  • Page 48 This has the same function as the Lock button at the bottom of the right pane in the start menu. ■ TOSHIBA Assist: This can be used to open TOSHIBA Assist if it is already installed in your computer. Satellite P200/Satellite Pro P200...

  • Page 49: Options

    Two memory module can be installed in this computer. An additional battery pack can be purchased from your TOSHIBA dealer. Use it as a spare to increase your computer operating time. An additional battery pack can be purchased from your TOSHIBA dealer. Use it as a spare to increase your computer operating time.
  • Page 50 Satellite P200/Satellite Pro P200 Series Features 1-14 Satellite P200/Satellite Pro P200...

  • Page 51: Chapter 2 The Grand Tour

    Satellite P200/Satellite Pro P200 The Grand Tour This chapter identifies the various components of your computer. Become familiar with each component before you operate the computer. Certain types of notebook chassis are designed to accommodate all possible configurations for an entire product series. Your selected model...
  • Page 52 The headphone jack lets you connect stereo headphones or other audio-output devices such as external speakers. Connecting headphones or other devices to this jack automatically disables the internal speakers. Satellite P200/Satellite Pro P200 The Grand Tour...

  • Page 53: Right Side

    Modem Jack Optical Disc Drive and LED Fan Vents Satellite P200/Satellite Pro P200 Use this dial to adjust the volume of the stereo speakers or headphones. The Multiple Digital Media Card Slot allows you to use media cards from digital still cameras and various forms of portable information equipment.

  • Page 54: Left Side

    This 15-pin port lets you connect an external video display to the computer. The fan vents help prevent the CPU from overheating. The Grand Tour NIVERSAL ERIAL (USB) P TV O i.LINK (IEEE1394a) P XPRESS Satellite P200/Satellite Pro P200...
  • Page 55 TV Out Port i.LINK (IEEE1394a) Port Express Card Slot Satellite P200/Satellite Pro P200 This jack lets you connect to a LAN. The adapter has built-in support for Ethernet LAN (10 megabits per second, 10BASE-T), Fast Ethernet LAN (100 megabits per second, 100BASE-TX) and Gigabit Ethernet LAN (1000 megabits per second, 1000BASE-T).

  • Page 56: Underside

    Hard Disk Drives store data, files and programs. Hard Disk Drives store data, files and programs. (The availability of this function depends on the model you purchased.) The Grand Tour HDD2* XPANSION EMORY OCKET ATTERY ATCH Satellite P200/Satellite Pro P200...

  • Page 57: Front With The Display Open

    Position the display at a comfortable viewing angle. * The availability of this feature is dependent on the model you purchased. Satellite P200/Satellite Pro P200 Use this socket to install a memory module to increase your computer's memory. Refer to the Memory expansion section in Chapter 8, Optional Devices.
  • Page 58 Press this button to begin playing an audio CD, a DVD movie or digital audio files. This button also acts as a Pause button. (The availability of this function depends on the model you purchased.) Satellite P200/Satellite Pro P200 The Grand Tour...
  • Page 59 Number Pad Finger Print Scanner* Use the fingerprint scanner to prevent Web Camera* Microphone* Satellite P200/Satellite Pro P200 Stops playing the CD, DVD or digital audio. (The availability of this function depends on the model you purchased.) Skips backwards to the previous track, chapter or digital file.

  • Page 60: Keyboard Indicators

    (capital) letter. Region Canada, United States Japan, Europe, South Africa, Middle East Southeast Asia, East Asia Australia, New Zealand, Pacific Islands, Central America, South America, Caribbean Russia, Indian Subcontinent, Africa, North Korea, Mongolia China Satellite P200/Satellite Pro P200 The Grand Tour...

  • Page 61: Writable Discs

    Writable discs This section describes the types of writable discs. Check the specifications for your drive to for the type of discs it can write. Use TOSHIBA Disc Creator to write compact discs. Refer to Chapter 4, Operating Basics. ■...
  • Page 62 To recharge the battery, simply connect the AC adapter to a power source and the computer. See Chapter 6, Power and Power-Up Modes, for details. Use of the wrong adapter could damage your computer. TOSHIBA assumes no liability for any damage in such case. The output rating for the computer is 19 volts DC.

  • Page 63: Chapter 3 Getting Started

    Satellite P200/Satellite Pro P200 Getting Started This chapter provides basic information to get you started using your computer. It covers the following topics: Be sure also to read Instruction Manual for Safety & Comfort. This guide, which is included with the computer, explains product liability.

  • Page 64: Connecting The Ac Adapter

    100 to 240 volts and 50 or 60 hertz. For details on using the AC adapter to charge the battery pack, refer to Chapter 6, Power and Power-Up Modes. Use of the wrong adapter could damage your computer. TOSHIBA assumes no liability for any damage in such case. The output rating for the computer is 19 volts DC.

  • Page 65: Opening The Display

    1. If a USB floppy disk drive is connected, make sure the drive is empty - if a disk is in the drive, press the eject button to remove it. 2. Open the display panel. 3. Press the computer's power button and then release it. Satellite P200/Satellite Pro P200 Opening the display Getting Started...

  • Page 66: Starting Up For The First Time

    1. If you have entered data, either save it to the hard disk, drive or to other storege media. 2. Make sure all disk/disks activity has stopped before removing the CD/ DVD or floppy diskette. Turning on the power ® Operating System End User License Satellite P200/Satellite Pro P200 Getting Started...

  • Page 67: Sleep Mode

    Do not remove the battery pack while the computer is in Sleep Mode (unless the computer is connected to an AC power source). Data in memory will be lost. Satellite P200/Satellite Pro P200 Getting Started ) located in the power...

  • Page 68: Hibernation Mode

    Please note that the Hibernation Mode feature does not save the status of any peripheral devices connected to the computer. Getting Started ) located in the power ), or click the arrow button ( Satellite P200/Satellite Pro P200 ) and...

  • Page 69: Starting Hibernation Mode

    Chapter 5, The Keyboard, for further details. To enter Hibernation Mode, follow the steps below. 1. Click Start. 2. Click the arrow button ( 3. Select Hibernate from the menu. Satellite P200/Satellite Pro P200 ) in the power management buttons Getting Started...

  • Page 70: Restarting The Computer

    ) in the power management ) and select Restart from the menu. Satellite P200/Satellite Pro P200 Getting Started...

  • Page 71: System Recovery Options

    2. Switch on the computer and, when the In Touch with Tomorrow TOSHIBA prompt appears, press the F12 key to display the Boot Menu. 3. Use the up or down cursor key to select the CD-ROM/DVD drive in the display menu.

  • Page 72: Create An Optical Recovery Discs

    When removing pre-installed drivers / utilities or when installing, you can setup the respective drivers / utilities from the following folder. C: \TOSAPINS\*** When Installing TOSHIBA SD Memory Card Format or other SD utilities, select TOSHIBA SD Memory Utilities from C:\TOSAPINS\. Create an Optical Recovery Discs ■...

  • Page 73: Restoring The Pre-Installed Software From The Recovery

    When the sound mute feature has been activated by pressing the Fn + Esc key, be sure to disable this to allow sounds to be heard before starting the restore process. Please refer to Chapter 5, The Keyboard, for further details. Satellite P200/Satellite Pro P200 Getting Started 3-11...
  • Page 74 When removing pre-installed drivers / utilities or when installing, you can setup the respective drivers / utilities from the following folder. C: \TOSAPINS\*** When Installing TOSHIBA SD Memory Card Format or other SD utilities, select TOSHIBA SD Memory Utilities from C:\TOSAPINS\. 3-12...

  • Page 75: Chapter 4 Operating Basics

    Satellite P200/Satellite Pro P200 Operating Basics This chapter gives information on basic operations including using the TouchPad/Dual Mode Pad, optical disc drives, the internal modem, LAN and wireless LAN. It also provides tips on caring for your computer and on heat dispersal.

  • Page 76: Dual Mode Pad Button Function (Dual Mode Pad Is Provided With Some Models)

    Mode. When you switch to Button Mode, the pad blinks blue. Increases or decreases the volume of speaker and headphone. Starts your mail box for you to receive and send mails. Operating Basics INDOWS ISTA HOTO ALLERY WITCH UTTON OLUME Satellite P200/Satellite Pro P200...

  • Page 77: Using The Fingerprint

    Power-on Security and Single Sign-On feature. To "swipe" refers to the action of reading a FingerPrint using the FingerPrint sensor. Satellite P200/Satellite Pro P200 Configfree is a suite of utilities to allow easy control of communication devices and network connections. It also allows you to find...

  • Page 78: How The Swipe The Finger

    Follow the onscreen instructions to adjust the speed of the swipe. The following illustrations show the correct way to slide your finger over the recognition sensor. Align the finger and sensor like the drawings. Operating Basics Satellite P200/Satellite Pro P200...

  • Page 79: Points To Note About The Fingerprint Sensor

    FingerPrint enrollment errors or a drop in the FingerPrint recognition success rate. ■ Soaked or swollen finger (e.g. after taking bath) ■ Injured finger ■ Wet finger ■ Soiled or oily finger ■ Extremely dry skin condition on finger Satellite P200/Satellite Pro P200 Operating Basics...
  • Page 80 Toshiba does not guarantee that the FingerPrint sensor will recognize the enrolled user or accurately screen out unauthorized users at all times. Toshiba is not liable for any failure or damage that might arise out of the use of this FingerPrint recognition software or utility.

  • Page 81: Points To Note About The Fingerprint Utility Software

    You are also able to start the User Enrollment Wizard by using the following method. ■ Click the Protector Suite QL icon in the Task Bar. ■ Swipe your finger across the FingerPrint Sensor. 2. Click Next. Satellite P200/Satellite Pro P200 Operating Basics...

  • Page 82: Window Logon Via Fingerprint Authentication

    Finger Print authentication fails for three consecutive tries - a warning message will be displayed when authentication is not normal or is not successful within a fixed duration. Operating Basics Satellite P200/Satellite Pro P200...
  • Page 83 ■ You must ensure that you use the TOSHIBA Password Utility to register a User Password before using the FingerPrint Power-on Security and its extended function to allow FingerPrint to be used to access the computer when it is turned on.
  • Page 84 Password and Windows Logon password before using the FingerPrint Power-on Security and this FingerPrint Single Sign On Feature. Please use TOSHIBA Password Utility to register your User/BIOS Password. If Windows Logon is not the default for your system, see Manual to register your Windows Logon password.

  • Page 85: Using The Web Camera

    TOSHIBA does not guarantee that the FingerPrint utility technology will be completely secure or error-free or it will be accurately screen out unauthorized users at all times. TOSHIBA is not liable for any failure or damage that might arise out of the use of the FingerPrint software.

  • Page 86: Using The Software

    Choose from the Options tab to flip, zoom, flicker rate, night mode and backlight compensation; in the Image tab change the colour settings; in the profile tab change the lighting conditions. Operating Basics Programs Camera ISPLAY INDOW AMERA ESOLUTION FFECTS Satellite P200/Satellite Pro P200...

  • Page 87: Using The Internal Modem

    1. Open the Modem Region Select application. It is located on the Programs menu at TOSHIBA Satellite P200/Satellite Pro P200 Choose from the: Options tab to change the tool position; the Picture tab to select picture output options such as size, export file and saving location;...

  • Page 88: Properties Menu

    Region Select Utility starts automatically when you start up the operating system. Open the Dialling Properties dialogue box after selecting region. The dialling properties dialogue box will be displayed automatically after you select the region. 4-14 The Region Selection icon The properties menu Satellite P200/Satellite Pro P200 Operating Basics...

  • Page 89: Modem Selection

    If you find that the modem speed is low or communication is interrupted when you are using the modem, please set the CPU speed to Maximum within the TOSHIBA Power Saver utility. Satellite P200/Satellite Pro P200 Connecting the internal modem...

  • Page 90: Lan

    1. Turn off the power to the computer and to all external devices connected to the computer. 2. Plug one end of the cable into the LAN jack. Press gently until you hear the latch click into place. 4-16 Connecting the LAN cable Satellite P200/Satellite Pro P200 Operating Basics...

  • Page 91: Wireless Lan

    11a, 11b, 11g and 11n wireless are based on IEEE 802.11a, 802.11b, 802.11g and 802.11n respectively. The IEEE 802.11n specification has not been finalized and is currently in draft release. The TOSHIBA 11a/b/g/n Wireless LAN Adapters are based on the Draft Release, Version 1.0, of the IEEE 802.11n specification.

  • Page 92: Bluetooth Wireless Technology

    Internet is an open invitation for outsiders to abuse your ISP account and privileges. 2. TOSHIBA is not liable for the eavesdropping on your data due to the use of the wireless LAN connection and any damage that may occur thereof.

  • Page 93: Using Optical Disc Drives

    The latest information regarding Operating System support, Language Support or available upgrades can be found on our web site http:// www.toshiba-europe.com/computers/tnt/bluetooth.htm in Europe or www.pcsupport.toshiba.com in the United States. Wireless communication switch You can enable or disable the Wireless devices function with the on/off switch.
  • Page 94 (about 15 mm) such as a straightened paper clip into the eject hole just to the right of the eject button. 4-20 Pressing the eject button Manual release with the eject hole Satellite P200/Satellite Pro P200 Operating Basics JECT BUTTON...
  • Page 95 If the disc is not seated properly when the drawer is closed, it might be damaged. Also, the drawer might not open fully when you press the eject button. Satellite P200/Satellite Pro P200 Pulling the drawer open Inserting a disc...
  • Page 96 2. The disc extends slightly over the sides of the drawer so you can grasp it. Hold it gently and lift it out. 3. Push the centre of the drawer to close it. Press gently until it locks into place. 4-22 Closing the drive drawer Removing a disc Satellite P200/Satellite Pro P200 Operating Basics...
  • Page 97 3. Change function of Buttons. Or you can go to 1. Start/All programs/TOSHIBA/Utilities and select Toshiba Assist. 2. Choose optimize from left panel then select TOSHIBA Button Controls. CD/DVD play control buttons...

  • Page 98: Writing Cds On A Cd-Rw/Dvd-Rom Drive

    DVD-ROM drive may not function properly, and you may fail to write or rewrite, lose data or incur other damage. Disclaimer TOSHIBA does not bear responsibility for the following: ■ Damage to any CD-R/-RW disc that may be caused by writing or rewriting with this product.

  • Page 99: When Writing Or Rewriting

    TOSHIBA has confirmed the operation of CD-R and CD-RW media of the manufacturers above. Operation of other media cannot be guaranteed. ■ CD-RW can generally be rewritten about 1,000 times. However, the actual number of rewrites is affected by the quality of the media and the way it is used.

  • Page 100: Writing Cds/Dvds On A Dvd Super Multi Drive Supporting Double Layer Disc Recording

    DVD-R/-RW/+R/+RW/-RAM discs. The following applications for writing are preinstalled: TOSHIBA Disc Creator/Direct Disc Writer. Ulead DVD MovieFactory TOSHIBA, which is a product of Ulead Systems, Inc. Important message Before you write or rewrite to CD-R/RW or DVD-R/-RW/+R/+RW/-RAM media, read and follow all set-up and operating instructions in this section.

  • Page 101: Before Writing Or Rewriting

    Based on TOSHIBA's limited compatibility testing, we suggest the following manufacturers of CD-R/RW and DVD-R/+R/-RW/+RW/-RAM media. However, in no event does TOSHIBA guarantee the operation, quality or performance of any disc. Disc quality can affect write or rewrite success rates.
  • Page 102 Writing is finished if you can eject DVD-RAM media. ■ Be sure to close all other software programs except the writing software. ■ Do not run software such as a screen saver, which can put a heavy load on the CPU. 4-28 Operating Basics Satellite P200/Satellite Pro P200...
  • Page 103 Write from the computer's hard disk drive to the CD. Do not try to write from shared devices such as a LAN server or any other network device. ■ Writing with software other than TOSHIBA Disc Creator or Ulead DVD MovieFactory operation with other software cannot be guaranteed.

  • Page 104: When Using Ulead Dvd Moviefactory® For Toshiba

    Simplified steps for making a Label Flash DVD: 1. Insert a Label Flash disc in DVD drive. Set printable surface for underside. 2. Click Start Ulead DVD MovieFactory for TOSHIBA Launcher to launch DVD MovieFactory. 3. Click Print Disc Label 4. Click the General tab.

  • Page 105: How To Learn More About Ulead Dvd Moviefactory

    - Use the Mode control button and Audio/Video control button to reproduce music or voice. - Open the DVD drive. - Install, remove or connect external devices, including the following: SD card, USB devices, external display, i.LINK. devices, optical digital devices. Satellite P200/Satellite Pro P200 Operating Basics ® 4-31...

  • Page 106: Toshiba Disc Creator

    You cannot use the TOSHIBA Disc Creator "Audio CD" function to record music to the DVD-R/-RW or DVD+R/+RW media. ■ Do not use the "Disc Backup" function of TOSHIBA Disc Creator to copy DVD-Video and DVD-ROM with copyright protection. ■...

  • Page 107: Media Care

    ■ TOSHIBA Disc Creator does not support recording to DVD-RAM discs. To record to a DVD-RAM, use Explorer or other similar utility. ■ When you back up a DVD disc, be sure the source drive supports recording to DVD-R/-RW or DVD+R/+RW discs. If the source drive does not support recording to DVD-R/-RW or DVD+R/+RW discs, it might not be backed up correctly.

  • Page 108: Disks

    6. Magnetic energy can destroy data on disks. Keep your disks away from speakers, radios, television sets and other sources of magnetic fields. TV-Out Use the TV-Out port to connect to a television. Be sure to use a 4 pin type S-video cable. 4-34 Operating Basics TV O Satellite P200/Satellite Pro P200...

  • Page 109: Setting Up More Than One Display

    If an external display will not be connected next time you use your computer, you should cancel any extended desktop or clone display settings before shutting down your computer. Clone display settings are those where more than one device has been selected and is simultaneously applicable. Satellite P200/Satellite Pro P200 Operating Basics 4-35...

  • Page 110: Cleaning The Computer

    Close the display. Do not pick up the computer by its display panel or back (where the interface ports are located). ■ Close all port covers. ■ Disconnect the AC adapter if it is connected. ■ Use the carrying case when transporting the computer. 4-36 Operating Basics Satellite P200/Satellite Pro P200...

  • Page 111: Chapter 5 The Keyboard

    Satellite P200/Satellite Pro P200 The Keyboard The computer's keyboard layouts are compatible with a 104/105-key enhanced keyboard. By pressing some keys in combination, all the 104/ 105-key keyboard functions can be executed on the computer. The number of keys on your keyboard depends on which country/region's keyboard layout your computer is configured with.

  • Page 112: F1 ... F12 Function Keys

    Soft keys: Fn key combinations The Fn (function) is unique to TOSHIBA computers and is used in combination with other keys to form soft keys. Soft keys are key combinations that enable, disable or configure specific features.

  • Page 113: Hotkeys

    Fn + Space Fn + 1 Fn + 2 Before using Fn+1 and Fn+2, you must install the TOSHIBA Zooming Utility. Please be aware that this 'zooming' function is only available within Microsoft Internet Explorer, Microsoft Office, Windows Media Player and Adobe Reader, and for the icons on the desktop.

  • Page 114: Windows Special Keys

    With the Num Lock off: 1. Hold Alt + Fn. 2. Using the number pad keys, type the ASCII code. 3. Release Alt + Fn, and the ASCII character appears on the display screen. The Keyboard Satellite P200/Satellite Pro P200...

  • Page 115: Chapter 6 Power And Power-Up Modes

    Satellite P200/Satellite Pro P200 Power and Power-Up Modes The computer's power resources include the AC adapter and internal batteries. This chapter gives details on making the most effective use of these resources including charging and changing batteries, tips for saving battery power, and power up modes.
  • Page 116 DC IN off Computer goes into Hibernation or shuts down (depending on the TOSHIBA Power Saver setting) • No operation • LED: Battery off DC IN off Satellite P200/Satellite Pro P200 Power and Power-Up Modes Power off (no operation)

  • Page 117: Power Indicators

    Check the Power indicator to determine the power status with the AC adapter connected: Blue Blinking Amber No light Satellite P200/Satellite Pro P200 Power and Power-Up Modes The battery charge is low. The AC adapter must be connected to recharge the battery Indicates the AC adapter is connected and is charging the battery.

  • Page 118: Battery Types

    Press <F1> to resume, <F2> to Setup. The computer's RTC battery is a lithium battery and should be replaced only by your dealer or by a TOSHIBA service representative. The battery can explode if not properly replaced, used, handled or disposed of. Dispose of the battery as required by local ordinances or regulations.

  • Page 119: Care And Use Of The Battery Pack

    3. Set correct time and date. If you still see the error message after performing the above actions, please contact your TOSHIBA service representative. Care and use of the battery pack The battery pack is a vital component of portable computing. Taking proper care of it will help ensure longer operating time on battery power as well as a longer life for your battery pack.
  • Page 120 Never use the computer again until it has been checked by a TOSHIBA service provider. It might generate smoke or fire, or the battery pack might rupture.

  • Page 121: Charging The Batteries

    The Battery indicator glows amber when the battery is being charged. Use only the computer connected to an AC power source to charge the battery pack. Do not attempt to charge the battery pack with any other charger. Satellite P200/Satellite Pro P200 Power and Power-Up Modes...

  • Page 122: Battery Charging Notice

    Repeat these steps two or three times until the battery recovers normal capacity. Power and Power-Up Modes Power on Power off about 12 or longer about 4 or longer about 24 about 24 with AC or Battery pack Satellite P200/Satellite Pro P200...

  • Page 123: Monitoring Battery Capacity

    Operating time decreases at low temperatures. ■ The condition of the battery terminals. Make sure the battery terminals stay clean by wiping them with a clean dry cloth before installing the battery pack. Satellite P200/Satellite Pro P200 Power and Power-Up Modes...

  • Page 124: Replacing The Battery Pack

    3. Remove all cables connected to the computer. 4. Turn the computer upside down. 6-10 Power and Power-Up Modes Approximately 1.5days(Sleep mode,9-cell) Approximately 1 days (Sleep mode,6-cell) Approximately 1 month (Shut down mode, all type of battery packs) Approximately 1 month Satellite P200/Satellite Pro P200...
  • Page 125 5. Unlock the Battery Pack Lock. 6. Slide the battery pack latch to the left, then pull the battery out of the battery bay. Satellite P200/Satellite Pro P200 Power and Power-Up Modes Removing the battery pack-1 Removing the battery pack-2...

  • Page 126: Installing The Battery Pack

    3. Hold the battery pack so that the label faces down and the connectors on the battery face the connectors on the computer. 4. Gently slide the battery into the battery bay until the latch clicks into place. 6-12 Power and Power-Up Modes Installing the battery pack Satellite P200/Satellite Pro P200...

  • Page 127: Toshiba Password Utility

    TOSHIBA Password Utility The TOSHIBA Supervisor Password Utility provides two levels of password security: User and Supervisor. Passwords set in TOSHIBA Supervisor Password Utility are different from the Windows User Password To start the utility, point to or click the following items: Launch TOSHIBA Assist ■...

  • Page 128: Power-Up Modes

    This feature automatically turns off the system in Sleep or Hibernation mode if the computer is not used for a set duration. Refer to Special features, in Chapter 1, Satellite P200/Satellite Pro P200 Series Features for an explanation of how to set the duration.

  • Page 129: Chapter 7 Hw Setup

    Satellite P200/Satellite Pro P200 HW Setup This chapter explains how to use the TOSHIBA HW Setup utility to configure your computer. TOSHIBA HW Setup lets you configure settings for various hardware devices through a number of tabs titled General, Password, Display, Boot Priority, Keyboard, CPU, LAN, and USB.
  • Page 130 CPU operation is automatically switched when necessary (Default). CPU power consumption and clock speed automatic switching function is disabled. The CPU always runs at low power consumption and low speed. Satellite P200/Satellite Pro P200 HW Setup...

  • Page 131: Boot Priority

    USB, you can still use a USB mouse, keyboard, and floppy disk drive by setting the Legacy USB Support option to enable. Enabled Disabled Satellite P200/Satellite Pro P200 Selects the USB floppy disk drive. Selects the Network. Selects optical device.
  • Page 132 Do not install or remove an optional memory module while Wake-up on LAN is enabled. Built-in LAN This feature enables or disables the Built-in LAN. Enabled Disabled Enables Wake-up on LAN. Disables Wake-up on LAN (Default). Enables Built-in LAN function (Default). Disables Built-in LAN function. Satellite P200/Satellite Pro P200 HW Setup...

  • Page 133: Chapter 8 Optional Devices

    Satellite P200/Satellite Pro P200 Optional Devices Optional devices can expand the computer's capabilities and its versatility. This chapter describes connection or installation of the following types of devices, which are available from your TOSHIBA dealer: Cards/Memory ■ Express Card ■...

  • Page 134: Express Card

    1. Click the Safety Remove Hardware icon on the Task Bar. 2. Click the Express Card you want to remove. 3. Press the Express Card once to extend it. 4. Grasp the extended Express Card, and remove it. Installing an Express Card Satellite P200/Satellite Pro P200 Optional Devices...

  • Page 135: Sd/Sdhc/Mmc/Ms/Ms Pro/Xd Memory Cards

    Keep foreign objects out of the memory card slot. A pin or similar object can damage the computer's circuitry. Do not format a memory card with Windows not being able to be used with some peripheral devices. Satellite P200/Satellite Pro P200 Removing an Express Card Capacities up to 2GB...

  • Page 136: Installing A Memory Card

    Do not attempt to install more than one card as you risk damaging either the cards themselves or the computer. Inserting a memory card fails to read the card, remove it then re-insert it. Optional Devices Satellite P200/Satellite Pro P200...

  • Page 137: Removing A Memory Card

    7. After using a memory card, return it to its case. 8. Do not touch the metal part or expose it to liquids or let it get dirty. Satellite P200/Satellite Pro P200 Removing a memory card Optional Devices...

  • Page 138: Memory Expansion

    CAUTION: If you want to upgrade system memory, you should only use certified modules. Ask your vendor or check the TOSHIBA web site for a list of approved memory products. Insert the two memory modules of the same specifications and capacity into Slot A and Slot B respectively.
  • Page 139 Debris on the connectors may cause memory access problems. 7. Push the module down so it lies flat. Latches on either side will click into place to secure the module. Satellite P200/Satellite Pro P200 Removing the memory module socket cover Installing a module...
  • Page 140 Do not touch the connectors on the memory module or on the computer. Debris on the connectors may cause memory access problems. 6. Seat the cover and secure its screw. 7. Replace the battery. Removing the memory module Optional Devices Latch Satellite P200/Satellite Pro P200...

  • Page 141: Additional Battery Pack

    Fn + F5 to switch to the internal display. Refer to Chapter 5, The Keyboard, for details on using hot keys to change the display settings. Satellite P200/Satellite Pro P200 Optional Devices...

  • Page 142: Television

    If a television is connected to the computer, set the TV type in Display Properties. Follow the steps below, based on the configuration of your computer: For Intel 1. Click Start >Control Panel >Appearance and Personalization> Personalization. 2. Choose Display settings. 8-10 Optional Devices Satellite P200/Satellite Pro P200...
  • Page 143 Optional Devices 3. Click the Advanced Settings button. The (Multiple Monitors) and Mobile ® Intel 945GM/943GML Express Chips Family dialogue box opens. 4. Click the Graphics Properties button. Satellite P200/Satellite Pro P200 8-11...
  • Page 144 5. In the subsequent dialogue box, click Display Devices and then set up your television and notebook displays. For nVidia 1. Click Start > Control Panel > Appearance and Personalization > Personalization. 2. Choose Display Settings. 8-12 Optional Devices Satellite P200/Satellite Pro P200...
  • Page 145 Optional Devices 3. Click the Advanced Settings button. The Generic PnP Monitor and NVIDIA GeForce Go 7600 Properties dialogue box opens. 4. Click Start the NVIDIA Control Panel. Satellite P200/Satellite Pro P200 8-13...
  • Page 146 Optional Devices 5. Click Display item. 6. Click Change Display Configuration item. 7. Setup your television and notebook display. 8-14 Satellite P200/Satellite Pro P200...

  • Page 147: I.link (Ieee1394A)

    1. Click the Safely Remove Hardware icon on the Task Bar. 2. Point to i.LINK (IEEE1394a) device and click. 3. Disconnect the cable from the computer then from the i.LINK device. Refer also to the documentation that came with your i.LINK device. Satellite P200/Satellite Pro P200 Optional Devices 8-15...

  • Page 148: Security Lock

    Attach one end of a cable to the desk and the other end to the security lock slot on the right side of the computer. Security lock 8-16 Satellite P200/Satellite Pro P200...

  • Page 149: Chapter 9 Troubleshooting

    Satellite P200/Satellite Pro P200 Troubleshooting TOSHIBA designed the computer for durability. However, should problems occur, following the procedures in this chapter can help to determine the cause. All readers should become familiar with this chapter. Knowing what might go wrong can help prevent problems from occurring.

  • Page 150: Preliminary Checklist

    Do you hear any beeps? How many? Are they long or short? Are they high pitched or low? Is the computer making any unusual noises? Write down what you hear. Record your observations so you can describe them to your dealer. Troubleshooting Satellite P200/Satellite Pro P200...

  • Page 151: Hardware And System Checklist

    ■ Sound system ■ Pointing Device Satellite P200/Satellite Pro P200 The problems may be caused by your software. If you cannot load a software package, the media may be damaged or the program might be corrupted. Try loading another copy of the software.

  • Page 152: Self Test

    If any of the following conditions are present, the self test failed: ■ The computer stops and does not proceed to display information or messages except the TOSHIBA logo. ■ Random characters appear on the screen, and the system does not function normally.

  • Page 153: Overheating Power Down

    Problem AC adapter doesn't power the computer (DC IN indicator does not glow blue). Satellite P200/Satellite Pro P200 Procedure Check the connections. Make sure the cord is firmly connected to the computer and a power outlet. Check the condition of the cord and terminals. If the cord is frayed or damaged, replace it.
  • Page 154 Replace it. If you do not think the battery is at the end of its operating life, see your dealer. Check the power consumption settings in the Power Options. Consider using a power saving mode. Satellite P200/Satellite Pro P200 Troubleshooting...

  • Page 155: Lcd Panel

    No display Problems above remain unresolved or other problems occur. Satellite P200/Satellite Pro P200 Procedure Check that the numeric keypad overlay is not selected. Press Fn + F10 and try typing again. Make sure the software you are using is not remapping the keyboard.
  • Page 156 Make sure the device's power is turned on. Reinstall the drivers. Open the Windows Control Panel and double-click the Add New Hardware icon. Follow the on-screen directions. Restart Windows. If problems persist, contact your dealer. Satellite P200/Satellite Pro P200 Troubleshooting...
  • Page 157 Monitor does not turn on Make sure that the external monitor's power No display Display error occurs Monitor goes into panning mode Satellite P200/Satellite Pro P200 Procedure Make sure the computer's wireless communication switch is set to on. Use the ConfigFree program that comes pre- installed in your computer to see LAN status.

  • Page 158: Sound System

    1. Open the Control Panel, select the Mouse icon and press Enter. 2. Click the Pointer Options tab. 3. Set the speed as instructed and click OK. If problems persist, contact your dealer. Satellite P200/Satellite Pro P200 Troubleshooting...

  • Page 159: Usb Mouse

    Refer also to your USB device’s documentation. Problem USB device does not work Satellite P200/Satellite Pro P200 Procedure The system might be busy. If the pointer is shaped as an hourglass, wait for it to resume its normal shape and try again to move it.

  • Page 160: Tv Output Signal

    Is Windows Media Player open? The system might not enter Sleep/Hibernation, if Windows Media Player is either playing a selection or finished playing a selection. Close Windows Media Player before you select Sleep/ Hibernation. If problems persist, contact your dealer. Satellite P200/Satellite Pro P200 Troubleshooting...
  • Page 161 Communication is cut off unexpectedly A CONNECT display is quickly replaced by NO CARRIER Satellite P200/Satellite Pro P200 Procedure Make sure the memory module installed in the expansion slot is compatible with the computer. If an incompatible module has been installed, follow the steps below.
  • Page 162 CD (CD-EXTRA), CD-G (Audio CD only) Recordable: CD-R, CD-RW Check the region code on the DVD. It must match that on the CD-RW/DVD-ROM drive. Region codes are listed in the optical disc section in Chapter 2, The Grand Tour. Satellite P200/Satellite Pro P200 Troubleshooting...
  • Page 163 Satellite P200/Satellite Pro P200 Procedure If you have trouble writing, make sure you are observing the following precautions: ■ Use only media recommended by TOSHIBA. ■ Do not use the mouse or keyboard during writing. ■ Use only the software supplied with the computer for recording.
  • Page 164 Check the region code on the DVD. It must match that on the DVD Super Multi drive. If you have trouble writing, make sure you are observing the following precautions: ■ Use only media recommended by TOSHIBA. ■ Do not use the mouse or keyboard during writing. ■...

  • Page 165: Disk Drive

    The fingerprint cannot be read due to injuries to the finger. Satellite P200/Satellite Pro P200 Procedure The software or hardware configuration may be causing a problem. Make sure the hardware configuration match's your software's needs. Try another disk. If you can access this disk, the original disk (not the disk drive) is problem.

  • Page 166: Toshiba Support

    Camera TOSHIBA support If you require any additional help using your computer or if you are having problems operating the computer, you may need to contact TOSHIBA for additional technical assistance. Before you call Some problems you experience may be related to software or the operating system, it is important to investigate other sources of assistance first.
  • Page 167 438B Alexandra Road #06-01 Alexandra Technopark Singapore 119968 United States of America TOSHIBA America Information Systems, Inc. 9740 Irvine Boulevard Irvine, California 92 718 Satellite P200/Satellite Pro P200 Troubleshooting In Europe Germany & Austria TOSHIBA Europe (I.E.) GmbH Geschäftsbereich, Deutschland-Österreich Hammfelddamm8,...
  • Page 168 Troubleshooting 9-20 Satellite P200/Satellite Pro P200...

  • Page 169: Chapter 10 Disclaimers

    For optimum performance, use your computer product only under recommended conditions. Read additional restrictions in your product documentation. Contact Toshiba technical service and support, refer to TOSHIBA support section in Chapter 9 Troubleshooting for more information. User’s Manual...

  • Page 170: Memory (Main System)

    Published battery life numbers are achieved on select models and configurations tested by Toshiba at the time of publication. Recharge time varies depending on usage. Battery may not charge while computer is consuming full power.

  • Page 171: Hdd Drive Capacity

    Satellite P200/Satellite Pro P200 = 1,000,000,000 bytes using powers of 10. The = 1,073,741,824 bytes, and...

  • Page 172: Copy Protection

    LCD Brightness and Eye Strain Your LCD display has a brightness approaching that of a TV device. We recommend that you adjust the brightness of your LCD to a comfortable level to prevent possible strain on your eyes. 10-4 Disclaimers Satellite P200/Satellite Pro P200...

  • Page 173: Specifications

    Satellite P200/Satellite Pro P200 Specifications This appendix summarizes the computer's technical specifications. Dimensions 399mm (W) x 288mm (D) x 46.5mm (H. Max.) User’s Manual Appendix A 288mm 46.5mm 36mm...

  • Page 174: Environmental Requirements

    Altitude (from sea level) -30 to 10,000 feet -30 to 40,000 feet Telephone line (analog only) Pulse Tone AT commands EIA-578 commands Computer's speaker Data: Full duplex Fax: Half duplex Satellite P200/Satellite Pro P200 Specifications Relative humidity 20% to 80%...
  • Page 175 Communication Protocol Communication Speed Error correcting Data compression Satellite P200/Satellite Pro P200 Data: ITU-T-Rec V.21/V.22/V.22bis/ (Former CCITT) V.32/ V.32bis/V.34/ V.90/ V.92(only for USA and Canada) Bell 103/212A Fax: ITU-T-Rec V.17/V.29/V.27ter /V.21 (Former CCITT) Data transmission and reception 300/1200/2400/4800/7200/9600/12000/14400/ 16800/19200/21600/24000/26400/28800/ 31200/ 33600 bps Data reception only with V.90/V.92...
  • Page 176 Specifications Satellite P200/Satellite Pro P200...

  • Page 177: Display Modes

    Satellite P200/Satellite Pro P200 Display Modes This appendix contains a table listing all the display modes when the display is set to an external monitor. If you are running some applications (for example a 3D application or video playback and so on), you may see some disturbance, flickering or frame dropping on your screen.

  • Page 178: Displaying Movies On A Tv Or Crt

    If a television is connected to the computer, set the TV type in Display Properties. Follow the steps below, based on the configuration of your computer: Color Depth Refresh Rate (bit) (Hz) 16 bit 32 bit Satellite P200/Satellite Pro P200 Display Modes...
  • Page 179 Display Modes For Intel 1. Click Start > Control Panel > Appearance and Personalization > Personalization. 2. Choose Display settings. Satellite P200/Satellite Pro P200...
  • Page 180 Display Modes 3. Click the Advanced Setting button. The (Multiple Monitors) and Mobile ® Intel 945GM/PM, 943GML Express Chips Family dialogue box opens. 4. Click the Graphics Properties button. Satellite P200/Satellite Pro P200...
  • Page 181 5. In the subsequent dialogue box, click Display Devices and then set up your television and notebook displays. For nVidia 1. Click Start > Control Panel > Appearance and Personalization > Personalization. 2. Choose Display Settings. Satellite P200/Satellite Pro P200 Display Modes...
  • Page 182 Display Modes 3. Click the Advanced Settings button. The Generic PnP Monitor and NVIDIA GeForce Go 7600 Properties dialogue box opens. 4. Click Start the NVIDIA Control Panel. Satellite P200/Satellite Pro P200...
  • Page 183 Display Modes 5. Click Display item. 6. Click Change Display Configuration item. 7. Setup your television and notebook display. Satellite P200/Satellite Pro P200...
  • Page 184 Display Modes Satellite P200/Satellite Pro P200...

  • Page 185: Ac Power Cord And Connectors

    Satellite P200/Satellite Pro P200 AC Power Cord and Connectors The power cord's AC input plug must be compatible with the various international AC power outlets and the cord must meet the standards for the country/region in which it is used. All cords must meet the following...
  • Page 186 The following illustrations show the plug shapes for the U. S. A. and Canada, the United Kingdom, Australia and Europe. UL approved Australia AS approved CSA approved Approved by the appropriate agency Canada AC Power Cord and Connectors United Kingdom BS approved Europe China CCC approved Satellite P200/Satellite Pro P200...
  • Page 187 Satellite P200/Satellite Pro P200 Glossary The terms in this glossary cover topics related to this manual. Alternate naming is included for reference. Abbreviations AC: alternating current AGP: accelerated graphics port BIOS: basic input output system CD-ROM: Compact Disc-Read Only Memory...
  • Page 188 The next time the CPU needs that same data, it looks for it in the cache memory rather than the main memory, which saves time. The computer has two cache levels. Level one is incorporated into the processor and level two resides in external memory. Glossary-2 Glossary Satellite P200/Satellite Pro P200...
  • Page 189 CRT: Cathode Ray Tube. A vacuum tube in which beams projected on a fluorescent screen-producing luminous spots. An example is the television set. cursor: A small, blinking rectangle or line that indicates the current position on the display screen. Satellite P200/Satellite Pro P200 Glossary Glossary-3...
  • Page 190 The keys labeled F1 through F12 that tell the computer to perform certain functions. Glossary-4 Glossary Satellite P200/Satellite Pro P200...
  • Page 191 K: Taken from the Greek word kilo, meaning 1000; often used as equivalent to 1024, or 2 raised to the 10th power. See also byte and kilobyte. KB: See kilobyte. Satellite P200/Satellite Pro P200 Glossary Glossary-5...
  • Page 192 The results of a computer operation. Output commonly indicates data. 1) printed on paper, 2) displayed at a terminal, 3) sent through the serial port of internal modem, or 4) stored on some magnetic media. Glossary-6 Glossary Satellite P200/Satellite Pro P200...
  • Page 193 A disk that has been formatted with an operating system. For MS-DOS the operating system is contained in two hidden files and the COMMAND.COM file. You can boot a computer using a system disk. Also called an operating system disk. Satellite P200/Satellite Pro P200 Glossary Glossary-7...
  • Page 194 TFT display: A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix technology with thin film transistor (TFT) to drive each cell. TouchPad/Dual Mode Pad: A pointing device integrated into the TOSHIBA computer palm rest. Universal Serial Bus: This serial interface lets you communicate with several devices connected in a chain to a single port on the computer.

This manual is also suitable for:

Satellite p205d-s8806Satellite pro p200 series

Table of Contents