Page 1 ® Satellite Series User’s Guide If you need assistance: Toshiba’s Support Web site pcsupport.toshiba.com Toshiba Global Support Centre Calling within the United States (800) 457-7777 Calling from outside the United States (949) 859-4273 For more information, see page 190 in this guide.
Page 2 TOSHIBA AMERICA INFORMATION SYSTEMS, INC. (“TOSHIBA”), ITS AFFILIATES AND SUPPLIERS DO NOT WARRANT THAT OPERATION OF THE PRODUCT WILL BE UNINTERRUPTED OR ERROR FREE. YOU AGREE THAT TOSHIBA,...
Page 3 Only Peripherals complying with the FCC Class B limits may be attached to this equipment. Operation with noncompliant peripherals or peripherals not recommended by Toshiba is likely to result in interference to radio and TV reception. Shielded cables must be used between the external devices and the computer's parallel port, monitor port, USB port, PS/2 port port and microphone jack.
Page 4: Industry Canada Requirement
This device must accept any interference received, including interference that may cause undesired operation. Contact either: Toshiba’s Support Web site at pcsupport.toshiba.com. Or call the Toshiba Global Support Centre: Within the United States at (800) 457-7777 Outside the United States at (949) 859-4273 Industry Canada Requirement This Class B digital apparatus complies with Canadian ICES-003.
Page 5: Telephone Company Procedures
If trouble is experienced with this equipment, for repair or limited warranty information, please contact Toshiba Corporation, Toshiba America Information Systems, Inc. or an authorized representative of Toshiba, or the Toshiba Support Centre within the United States at (800) 457-7777 or Outside the United States at (949) 859-4273.
Page 6 provided may not be a 900 number or any other number for which charges exceed local or long-distance transmission charges.) In order to program this information into your fax transmission, refer to the fax software instructions installed on this computer. Alarm Equipment If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm...
Page 7: Wireless Interoperability
USOC RJ11C. Wireless Interoperability The TOSHIBA Wireless LAN Mini PCI Card products are designed to be interoperable with any wireless LAN product that is based on Direct Sequence Spread Spectrum (DSSS) radio technology, and is compliant to: The IEEE 802.11 Standard on Wireless LANs (Revision A/B/G), as defined...
Page 8: Wireless Lan And Your Health
The radiated output power of the TOSHIBA Wireless LAN Mini PCI Card is far below the FCC radio frequency exposure limits. Nevertheless, the TOSHIBA Wireless LAN Mini PCI Card shall be used in such a manner that the potential for human contact during normal operation is minimized. In normal operating configuration, the LCD in the upright position, the distance between the antenna and the user should not be less than 20 cm.
Page 9 documentation that comes with the product. This device complies with the following radio frequency and safety standards. Canada – Industry Canada (IC) This device complies with RSS 210 of Industry Canada. The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF field in excess of Health Canada limits for the general population;...
Page 10 EU Declaration of Conformity TOSHIBA declares that this product conforms to the following Standards: This product is carrying the CE-Mark in accordance with the related European Directives. Responsible for CE-Marking is TOSHIBA Europe, Hammfelddamm 8, 41460 Neuss, Germany. VCCI Class B Information...
Page 11 2. If this equipment causes RF interference to other radio stations, promptly change the frequency being used, change the location of use, or turn off the source of emissions. 3. Contact TOSHIBA Direct PC if you have problems with interference caused by this product to Other Radio Stations.
Page 12: Device Authorization
The interference range of this equipment is less than 40m. 2,400 MHz to 2,483.5 MHz. It is possible to avoid the band of mobile object identification systems. 3. TOSHIBA Direct PC Monday – Friday: 10:00 – 17:00 Toll Free Tel: 0120-15-1048...
Page 13: Radio Approvals For Wireless Devices
The following restrictions apply: Do not disassemble or modify the device. Do not install the embedded wireless module into other device. 5.17 GHz to 5.23 GHz for indoor use only. Radio Approvals for Wireless Devices NOTE The following information is dependent on what type of wireless device is in your computer.
Page 14 Europe - Restrictions for use of 2.4 GHz Frequencies in European Community Countries België/ For private usage outside buildings across public grounds over less than Belgique: 300m no special registration with IBPT/BIPT is required. Registration to IBPT/BIPT is required for private usage outside buildings across public grounds over more than 300m.
Page 15 802.11a (5 GHz) Australia Canada France Ireland Luxembourg Norway Switzerland Turbo Mode (5 GHz) Canada Europe - Restrictions for Use of 5 GHz Frequencies in European Community Countries European Community Countries Austria Belgium, France, Switzerland/Lichtenstein Denmark, Finland, Germany, Greece, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Sweden, UK...
Page 16 This device must not be operated in ad-hoc mode using channels in the 5 GHz bands in the European Community. Ad-hoc mode provides a direct communication between two client devices without a Wireless LAN Access Point. This device must be used with Access Points that have employed and activated a radar detection feature required for European Community operation in the 5 GHz bands.
Page 17 802.11a (5 GHz) Australia Canada France Ireland Luxembourg Norway Switzerland Turbo Mode (5 GHz) Canada Approved Countries/Regions for use for the Intel Wireless LAN 2100 3B Mini PCI Adapter This equipment is approved to the radio standard by the countries/regions in the following table.
Page 18: Bluetooth Wireless Technology Interoperability
Wireless Technology Interoperability ® Bluetooth Cards from TOSHIBA are designed to be interoperable with any product with Bluetooth wireless technology that is based on Frequency Hopping Spread Spectrum (FHSS) radio technology, and is compliant to: Bluetooth Specification as defined and approved by The Bluetooth Special Interest Group.
Page 19: Bluetooth Wireless Technology And Your Health
Always use Bluetooth cards from TOSHIBA in order to enable wireless networks over two or more (up to a total of seven) TOSHIBA portable computers using these cards. Please contact TOSHIBA computer product support on Web site http://www.toshiba-europe.com/computers/tnt/ bluetooth.htm in Europe or pcsupport.toshiba.com in the United States for...
Page 20: Regulatory Statements
The radiated output power of the Bluetooth Card from TOSHIBA is far below the FCC radio frequency exposure limits. Nevertheless, the Bluetooth Card from TOSHIBA shall be used in such a manner that the potential for human contact during normal operation is minimized.
Page 21 2. If this equipment causes RF interference to other radio stations, promptly change the frequency being used, change the location of use, or turn off the source of emissions. 3. Contact TOSHIBA Direct PC if you have problems with interference caused by this product to Other Radio Stations.
Page 22 This equipment uses a frequency bandwidth from 2,400 MHz to 2,483.5 MHz. It is impossible to avoid the band of mobile object identification systems. 3. TOSHIBA Direct PC Monday – Friday: 10:00 – 17:00 Toll Free Tel: 0120-15-1048 Direct Dial: 03-3457-4850...
Page 23 CD-RW drive, Multi-drive or any other optical drive. You could damage the drive. You would also be exposed to laser light or other safety hazards, resulting in serious injury. Always contact an authorized Toshiba service provider, if any repair or adjustment is required.
Page 24 Copyright This guide is copyrighted by Toshiba America Information Systems, Inc. with all rights reserved. Under the copyright laws, this guide cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed, however, with respect to the use of the information contained herein.
Page 25 Systems Incorporated in the United States and/or other countries. Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Toshiba is under license. Other trademarks and trade names are those of their respective owners.
Page 26: Table Of Contents
Keeping yourself comfortable ...40 Precautions...40 Important information on your computer’s Setting up your computer ...43 Setting up your software...43 Registering your computer with Toshiba ...44 Adding optional external devices...45 Connecting to a power source ...46 Charging the main battery...49 cooling fan ...42...
Page 27 Using the computer for the first time ...50 Opening the display panel ...50 Your computer’s features and specifications ...51 Turning on the power ...51 Adding memory (optional) ...52 Installing a memory module ...53 Removing a memory module...58 Checking total memory ...61 Using the TouchPad™...61 Scrolling with the TouchPad™...
Page 28 Playing an audio CD...99 Playing a CD/DVD ...101 Creating a CD/DVD...101 Removing a disc with the computer on...102 Removing a disc with the computer off ...103 Caring for CD or DVD discs ...103 Toshiba’s online resources ...104 keyboard ...83 ® Explorer...87...
Page 29 Chapter 3: Mobile Computing...105 Toshiba’s energy-saver design...105 Running the computer on battery power ...105 Battery Notice ...106 Power management ...107 Using additional batteries ...107 Charging batteries...108 Charging the main battery...108 Charging the RTC battery...109 Monitoring main battery power...110 Determining remaining battery power...112 What to do when the main battery runs low ...112...
Page 30 Removing a PC Card ...142 Setting up a PC Card for your computer ...143 Using the Bridge Media Adapter Slot ...143 Inserting memory media...144 Removing memory media...144 Using the i.LINK Chapter 5: Toshiba Utilities...146 TOSHIBA Assist ...147 Connect...148 Secure...149 Protect & Fix ...150 Optimize...151 Setting passwords ...152...
Page 31 Viewing existing key assignments ...161 Changing or removing existing key TOSHIBA Hotkey Utility ...162 TOSHIBA SD™ Memory Card Format Utility ...163 TOSHIBA Power Saver ...164 Preset Power Profiles ...165 Quickly creating a new power profile ...165 Customizing a power profile ...165 Mouse Utility ...166...
Page 32 Wireless networking problems...217 DVD operating problems...220 Develop good computing habits ...223 Data and system configuration backup in If you need further assistance...230 Before you contact Toshiba ...230 Contacting Toshiba ...231 Other Toshiba Internet Web sites...232 Toshiba’s worldwide offices...232 Appendix A: Hot Keys...234 Volume Mute ...234...
Page 33 Disabling or enabling the TouchPad ...240 Zooming applications in/out ...241 Keyboard hot keys ...241 Appendix B: Power Cord/Cable Connectors... 242 Appendix C: Using ConfigFree™ with your Toshiba Computer... 243 Getting Started...244 Starting ConfigFree ...244 ConfigFree Utilities...246 Connectivity Doctor ...246 Search for Wireless Devices ...249 Profile Settings ...254...
Page 34: Introduction
2002/95/EC, Restriction of the use of certain Hazardous Substances in electrical and electronic equipment (RoHS), which restricts use of lead, cadmium, mercury, hexavalent chromium, PBB, and PBDE. Toshiba requires its notebook component suppliers to meet RoHS requirements and verifies its suppliers’ commitment to meeting RoHS requirements by conducting component sampling inspections during the product design approval process.
Page 35: This Guide
Toshiba’ s Web site at pcsupport.toshiba.com. While Toshiba has made every effort at the time of publication to ensure the accuracy of the information provided herein, product specifications, configurations, prices, system/component/ options availability are all subject to change without notice.
Page 36: Safety Icons
Introduction Safety icons Safety icons This manual contains safety instructions that must be observed to avoid potential hazards that could result in personal injuries, damage to your equipment, or loss of data. These safety cautions have been classified according to the seriousness of the risk, and icons highlight these instructions as follows: Indicates an imminently hazardous situation which, if not...
Page 37: Other Icons Used
Your computer comes with the following documentation: An electronic version of the user’s guide (this document) It may also contain guides for other programs that may come with your system. For accessory information, visit Toshiba’s Web site at accessories.toshiba.com. Introduction Other documentation...
Page 38: Service Options
To stay current on the most recent software and hardware options for your computer, and for other product information, be sure to regularly check the Toshiba Web site at pcsupport.toshiba.com. If you have a problem or need to contact Toshiba, see Something Goes Wrong” on page 190. “If...
Page 39: Chapter 1: Getting Started
Chapter 1 Getting Started This chapter provides tips for working comfortably, summarizes how to connect components, and explains what to do the first time you use your notebook computer. Selecting a place to work Your computer is portable and designed to be used in a variety of circumstances and locations.
Page 40: Keeping Yourself Comfortable
Extreme heat, cold, or humidity. Liquids and corrosive chemicals. Keeping yourself comfortable The Toshiba Instruction Manual for Safety and Comfort, that shipped with your computer, contains helpful information for setting up your work environment and tips for working comfortably throughout the day.
Page 41 Computer base and palm rest can become hot! Avoid prolonged contact to prevent heat injury to skin. Read the enclosed Instruction Manual for Safety and Comfort. Never place a heavy object on the computer and be careful not to drop a heavy object onto the computer. It could damage the computer or cause system failure.
Page 42: Important Information On Your Computer's Cooling Fan
Getting Started Selecting a place to work Important information on your computer’s cooling fan Your computer may have a CPU cooling fan that cools the CPU by drawing outside air into the computer. The cooling fan may be located on the bottom of the computer. Always make sure your computer and AC adaptor have adequate ventilation and are protected from overheating when the power is turned on or when an AC adaptor is connected to...
Page 43: Setting Up Your Computer
Setting up your computer TECHNICAL NOTE: You must complete all setup steps up to and including adding external or internal components to your computer. These components include, but are not limited to, a mouse, keyboard, printer, memory, and PC Cards. Your computer contains a rechargeable main battery that needs to be charged before you can use it.
Page 44: Registering Your Computer With Toshiba
Registering your computer with Toshiba Product registration is strongly recommended, and allows Toshiba to send you periodic updates, announcements, and special offers applicable to your product. Product registration can be completed during the initial start up process of your computer.
Page 45: Adding Optional External Devices
Failure to complete Product Registration will not diminish Customer rights under the Toshiba limited Warranty. NOTE To register online, you must be connected to the Internet via your computer’s modem (available on certain models) and a voice-grade telephone line, or by a Local Area Network.
Page 46: Connecting To A Power Source
TOSHIBA Battery Charger (that may have been provided with your computer), or use AC adaptors and battery chargers specified by TOSHIBA to avoid any risk of fire or other damage to the computer. Use of an incompatible AC adaptor or Battery Charger could cause fire or damage to the computer possibly resulting in serious injury.
Page 47 Power cord/cable (Sample Illustration) Power cord/cable and AC adaptor To connect AC power to the computer: Connect the power cord/cable to the AC adaptor. (Sample Illustration) Connecting the power cord/cable to the AC adaptor Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm.
Page 48 Getting Started Connecting to a power source Plug the AC adaptor cord into the DC-IN on the back of the computer. (Sample Illustration) Connecting the AC adaptor cord to the computer Connect the power cord/cable to a live electrical outlet. The AC power and battery lights on the indicator panel glow blue.
Page 49: Charging The Main Battery
NOTE If the AC power light flashes amber during charging, either the main battery is malfunctioning, or it is not receiving correct input from the AC power supply. Disconnect the AC power cord/cable and remove the main battery pack. See page 117 Charging the main battery Your computer came with its battery already installed.
Page 50: Using The Computer For The First Time
Getting Started Using the computer for the first time Using the computer for the first time The computer is now ready for you to turn it on and begin using it. Opening the display panel Slide the display latch to the right. Lift the display panel.
Page 51: Your Computer's Features And Specifications
Your computer’s features and specifications Certain notebook chassis are designed to accommodate all possible configurations for an entire product Series. Your select model may not have all the features and specifications corresponding to all of the icons or switches shown on the notebook chassis, unless you have selected all those features.
Page 52: Adding Memory (Optional)
You may want to increase the computer’s memory if you use complex software or process large amounts of data. NOTE Before adding external devices or memory, Toshiba recommends setting up your software. See software” on page “Setting up your...
Page 53: Installing A Memory Module
Installing a memory module Additional memory modules can be installed in the memory module slots on the base of the computer. You will need a small Phillips screwdriver for this procedure. If you use the computer for a long time, the memory module will become hot.
Page 54 Getting Started Adding memory (optional) Remove the main battery. For information on removing the main battery, see computer” on page Close the display panel and turn the computer upside down to locate the memory module slot cover. (Sample Illustration) Locating the memory module slot cover Using a small Phillips screwdriver, loosen the captive screw that secures the memory module slot cover.
Page 55 Remove the memory module slot cover. Place the screw and cover in a safe place so that you can retrieve them later. Static electricity can damage the memory module. Before you handle the module, touch a grounded metal surface to discharge any static electricity you may have built up.
Page 56 Getting Started Adding memory (optional) Pick up the memory module by its sides, avoiding any contact with its connector. Position the module toward the socket, aligning the connector’s notch with the matching key in the socket. notch latch (Sample Illustration) Aligning the memory module with the socket Firmly press the memory module into the memory slot’s socket at approximately a 30-degree angle (to the horizontal surface of the computer).
Page 57 Once the module’s connector is fully inserted into the socket, press downward on the top edge of the module to seat the module into the latches at the sides of the socket. These latches should “snap” into place securely with the corresponding cutouts in the side of the module.
Page 58: Removing A Memory Module
Getting Started Adding memory (optional) Replace the memory module slot cover and secure it using the screw. Re-insert the main battery. For more information on inserting the main battery, see battery” on page Turn the computer right side up. Reconnect the cables. Restart the computer.
Page 59 Do not try to remove a memory module with the computer turned on. You can damage the computer and the memory module. Do not remove the memory module while the computer is in Standby or Hibernation mode. The computer could hang up the next time you turn it on and data in memory will be lost.
Page 60 Getting Started Adding memory (optional) (Sample Illustration) Removing the memory module Replace the memory module slot cover and secure it using the screw. Re-insert the main battery. For more information on inserting the main battery, see battery” on page Turn the computer right side up. Reconnect the cables.
Page 61: Checking Total Memory
Checking total memory When you add or remove a memory module, you can check that the computer has recognized the change. To do this: Click Start, Control Panel, Performance and Maintenance, and then System. The General tab view automatically appears and shows total memory.
Page 62: Scrolling With The Touchpad
Getting Started Using the TouchPad™ Once you have positioned your cursor, you can click it into place by either double-tapping the TouchPad or clicking the control buttons. Scrolling with the TouchPad There are two active regions on the TouchPad to scroll as you would with any wheel device on a mouse or trackball.
Page 63 Click the Device Settings tab. The Device Settings tab view window appears. (Sample Image) Device Settings tab screen Select Disable or Enable, whichever is appropriate. Click Apply. Click OK. The Mouse Properties window closes. Close the Printers and Other Hardware window. Close the Control Panel window.
Page 64: Using External Display Devices
Getting Started Using external display devices Using external display devices Your computer comes with a built-in LCD display, but you can also connect an external display device to the available video port: An external monitor or projector via the RGB (monitor) port A TV, VCR, or DVD recorder via the S-video (TV-out) port (available on certain models)
Page 65: Directing The Display Output When You Turn On The Computer
Directing the display output when you turn on the computer Once you have connected an external display device, you can choose to use the internal display only, the external device only, or both simultaneously. The quickest way to change the display output settings is to use the display hot key ( Press While holding down...
Page 66: Adjusting The Quality Of The External Display
Getting Started Using an external keyboard TECHNICAL NOTE: You can also change these settings using the Display Properties box. Set the option for the video controller by clicking Start, Control Panel, Appearance and Themes, and then Display. Choose the Settings tab, click the Advanced button, select Display Device, select the applicable Monitor type, and then click Apply or OK.
Page 67: Using A Mouse
Using a mouse You may want to use a mouse instead of the computer’s built- in TouchPad. You can use a USB-compatible mouse. After logging on to your system, the mouse cursor may move NOTE to the upper-right side of the screen. If this occurs, press the or Windows key to return it to its original position.
Page 68: Setting Up A Printer
Getting Started Connecting a printer If your printer does not support Plug and Play, you can set up the printer as described in To connect a printer to your computer: Connect the printer cable to the printer and then connect the other end to one of the computer’s USB ports.
Page 69: Connecting An Optional External Diskette Drive
Getting Started Connecting an optional external diskette drive Connecting an optional external diskette drive Some operations, such as creating a password service diskette, require a diskette drive designed for use with 3.5- inch diskettes. (Sample Illustration) Optional external USB diskette drive To connect an optional external USB diskette drive, connect the cable to one of the computer’s USB ports.
Page 70: Turning Off The Computer
Getting Started Turning off the computer Turning off the computer Pressing the power button before shutting down the Windows work. Make sure the system indicator panel’s disk light and the drive-in-use light are off. If you turn off the power while a disk is being accessed, you may lose data or damage the disk and/or drive.
Page 71 If you have work in progress and are not connected to a network, use the Windows commands to save your system settings so that, when you turn on the computer again, you will automatically return to where you left off. TECHNICAL NOTE: Before using any of these options to shut down or turn off your computer, save your files and make sure the disk activity lights are off.
Page 72 Getting Started Turning off the computer For information on how to use and configure Hibernation mode see “Using and configuring Hibernation mode” on page Standby mode The Standby command places the computer into a power- saving mode. Standby holds the current state of the computer in system memory (RAM) so that, when you restart the computer, you can continue working from where you left off.
Page 73: Using The Turn Off Computer Or Shut Down Commands
Using the Turn Off Computer or Shut Down commands Depending on the operating system installed, use the following steps to turn off your computer. Turn Off For Windows Professional or Windows domain server, follow these steps to turn off the computer: Click Start, and then Turn off computer.
Page 74 Toshiba’s Power Saver utility. Click Start, Control Panel, and then Performance and Maintenance. Click the TOSHIBA Power Saver icon. Click on the Setup Action tab. (Sample Image) Setup action settings screen Select the options you want from the drop-down lists.
Page 75: Using And Configuring Hibernation Mode
Click OK. For more information about the Power Saver utility, see NOTE “TOSHIBA Power Saver” on page Once the computer is configured, you can turn it off by either pressing the power button or closing the display panel, depending on the options set.
Page 76 To use any of these methods, you first need to enable them in Toshiba’s Power Saver utility. Click Start, Control Panel, and then Performance and Maintenance. Click the TOSHIBA Power Saver icon. Click the Setup Action tab. Select Hibernation for the options you want. When I press the power button...
Page 77: Using And Configuring Standby Mode
Getting Started Turning off the computer Starting again from Hibernation mode To start up the computer from Hibernation mode, press the power button until the power button and the on/off light glow blue. The computer returns to the screen(s) you were using. If you put the computer in Hibernation mode by closing the display panel, you can start it again by opening the display panel.
Page 78 To use any of these methods, you first need to enable them in Toshiba’s Power Saver utility. Click Start, Control Panel, and then Performance and Maintenance. Click the TOSHIBA Power Saver icon. Click the Setup Action tab. Select Standby for the options you want. When I press the power button...
Page 79: Closing The Display Panel
Closing the display panel After you have turned off the computer, close the display panel to keep dust and dirt out of the computer. Caring for your computer This section gives tips on cleaning and moving your computer. For information about taking care of your computer’s battery, see page 120.
Page 80: Using A Computer Lock
You may want to secure your computer to a heavy object such as your desk. The easiest way to do this is to purchase an optional computer lock cable. For more information on purchasing a cable lock, visit accessories.toshiba.com. (Sample Illustration) Computer lock cable To secure the computer: Wrap the cable through or around some part of a heavy object.
Page 81: Chapter 2: Learning The Basics
Chapter 2 Learning the Basics This chapter gives some computing tips and provides important information about basic features. Computing tips Save your work frequently. Your work stays in the computer’s temporary memory until you save it to the disk. If the network you are using goes down and you must restart your computer to reconnect, or your battery runs out of charge while you are working, you will lose all work since you last saved.
Page 82 Learning the Basics Computing tips Back up your files to disks (or other removable media) on a regular basis. Label the backup copies clearly and store them in a safe place. It is easy to put off backing up because it takes time. However, if your hard disk suddenly fails, you will lose all the data on it unless you have a separate backup copy.
Page 83: Using The Keyboard
Using the keyboard Your computer’s keyboard contains character keys, control keys, function keys, and special Windows the functionality of a full-size keyboard. (Sample Illustration) Keyboard Character keys Typing with the character keys is very much like typing on a typewriter, except that: The space bar creates a space character instead of just passing over an area of the page.
Page 84: Ctrl, Fn, And Alt Keys
Learning the Basics Using the keyboard Your computer’s keyboard has only one Most of the time, this does not matter. However, some programs assign separate functions to the right and left keys, or to the regular and numeric pad the full-sized keyboard. Using the these separate keys, as follows: Press the right side of the enhanced keyboard.
Page 85: Windows Special Keys
Windows special keys (Sample Illustration) Windows special keys Your computer’s keyboard has two keys that have special functions in Windows: Windows key—Opens the Start menu Application key—Has a similar function as the secondary mouse button Overlay keys The keys with gray numbers and symbols on the front of them form the numeric and cursor overlay.
Page 86: Using The Overlay To Type Numeric Data
Learning the Basics Starting a program Using the overlay to type numeric data The keys with the numbers on their right front are the numeric overlay keys. To turn the numeric overlay on, press simultaneously. The numeric mode light on the keyboard indicator panel glows when the numeric overlay is on.
Page 87: Starting A Program From The Start Menu
The next three sections explain how to start a program from the Start menu, Explorer and the Run dialog box. Starting a program from the Start menu When you install a program, the operating system usually puts an icon in the All Programs menu. To start a program that has an icon in the All Programs menu, follow these steps, which use the Windows Click Start, and then All Programs.
Page 88: Starting A Program From The Run Dialog Box
Learning the Basics Starting a program Click Windows Explorer. Click My Computer to expand the window. In the left part of the window, click the line that ends in “(C:).” In the left part of the window, under the C: icon, double- click the folder containing the program, in this case Program Files.
Page 89: Saving Your Work
In the Run dialog box: If you know the program’s location, type the command line. For a program in the Windows folder, type just the program name. Otherwise, type the full file path. For example, to access WordPad, type: then click OK. If you do not know the location, you can search for it by clicking Start, then Search, and then following the on-screen instructions.
Page 90: Saving Files
Learning the Basics Saving your work Saving files In your Windows If you are working with a document that already has a file name, this is all you need to do. If you created a new document, your program displays a Save As dialog box. Use this dialog box to specify where to store the document and to give it a file name.
Page 91: File Names
File names The Windows operating system supports long file names that can contain up to 255 characters and can include spaces. Some applications do not support long file names and require file names limited to no more than eight characters. You may use all the letters and numbers on the keyboard plus these characters: _ ^ $ ~ ! # % &...
Page 92: Printing Your Work
Learning the Basics Printing your work Printing your work Ensure the operating system is set up for your printer as described in HINT: You only need to set up the printer the first time you connect it. If you use more than one printer or are changing printers, you will need to set up the Windows system to run with the additional printer(s).
Page 93: Backing Up Your Work
Backing up your work Back up all the files you create in case something happens to your computer. You can back up your files to different types of media such as CDs, DVDs, diskettes, or to a network, if available. To back up several files at one time, use the Microsoft ®...
Page 94: Using The Optical Drive
Learning the Basics Using the optical drive Using the optical drive Optical storage has become the preferred medium for software, music, and video. Digital versatile discs (DVDs) provide a significant increase in data storage and support features that are not available on any other video platform. These features include wide-screen movies, multiple language tracks, digital surround sound, multiple camera angles, and interactive menus.
Page 95: Media Control Buttons
Drive in-use indicator light—Indicates when the drive is in use. Eject button—Press to release the disc tray. Do not press the eject button or turn off the computer while the drive in-use indicator light is glowing. Doing so could damage the disc or the drive.
Page 96 Learning the Basics Using the optical drive (Sample Illustration) Media Control buttons The Internet browser button lets you access the Internet when the computer is powered on or off, or is in Standby mode or Hibernation mode. Please refer to the Internet”...
Page 97: Inserting A Compact Disc
The following chart describes the functionality of the CD/DVD button. Power is off or the computer is in Hibernation mode and you press the CD/DVD button Operating system is running or the computer is in Standby mode and you press the CD/DVD button The Play/Pause button starts playing the disc or makes it pause if currently playing.
Page 98 Learning the Basics Using the optical drive Grasp the tray and pull it fully open. (Sample Illustration) Drive tray fully extended Hold the disc by its edges and check that it is free of dust. If the disc is dusty, clean it as described in CD or DVD discs”...
Page 99: Playing An Audio Cd
If you insert the disc incorrectly, it may jam the drive. If this happens, contact Toshiba support for assistance. Push the disc tray in by pressing gently on the center of the tray until it clicks into place.
Page 100 Learning the Basics Using the optical drive Stop button Play/Pause button (Sample Image) Windows Media Player screen The Windows Media Player control panel works much like an ordinary compact disc player: To play the CD or to pause, click the Play/Pause button. To stop the CD, click the Stop button.
Page 101: Playing A Cd/Dvd
Playing a CD/DVD If you insert a CD/DVD into the optical drive and the Auto- Run feature does not automatically start your disc, try launching the CD/DVD manually. To do this, follow these steps: Click Start, and then My Computer. Click the optical drive icon.
Page 102: Removing A Disc With The Computer On
These problems are not due to any defect in your Toshiba computer or optical drive. Please refer to your computer's product specification for listing of specific format compatibilities.
Page 103: Removing A Disc With The Computer Off
Removing a disc with the computer off To remove a disc with the computer turned off: Insert a slender object, such as a straightened paper clip, into the manual eject hole. The disc tray slides partially out of the drive (about 1 inch). Never use a pencil to press the manual eject button.
Page 104: Toshiba's Online Resources
Learning the Basics Toshiba’s online resources Toshiba’s online resources Toshiba maintains a number of online sites to which you can connect. These sites provide information about Toshiba products, give help with technical questions and keep you up to date with future upgrades. For more information, see “Contacting Toshiba”...
Page 105: Chapter 3: Mobile Computing
Many of these energy-saving features have been set by Toshiba. We recommend you leave these features active, allowing your computer to operate at its maximum energy efficiency, so that you can use it for longer periods while traveling.
Page 106: Battery Notice
Published battery life numbers are achieved on select models and configurations tested by Toshiba at the time of publication. Recharge time varies depending on usage. Battery may not charge while the computer is consuming full power.
Page 107: Power Management
Users who are not completely familiar with the power management component of the system should use the preset configuration. For assistance with setup changes, contact Toshiba’s Global Support Centre. Using additional batteries In addition to the main battery, you may also have an optional second battery (not included with your computer).
Page 108: Charging Batteries
Never leave batteries in the battery charger for more than a week at a time. Doing so may reduce the potential charge of the battery. Always use the battery charger specified by Toshiba. You can order a Toshiba battery charger from Toshiba’s Web site at accessories.toshiba.com.
Page 109: Charging The Rtc Battery
The battery may not start charging immediately under the following conditions: The battery is extremely hot or cold. To ensure that the battery charges to its full capacity, wait until it reaches room temperature (50 to 80 degrees Fahrenheit, 10 to 26 degrees Celsius). The battery is almost completely discharged.
Page 110: Monitoring Main Battery Power
Mobile Computing Monitoring main battery power If the RTC battery is low, the real-time clock and calendar may display the incorrect time and date, or stop working. To recharge the RTC battery, plug the computer into a live electrical outlet and leave the computer powered on for 24 hours.
Page 111 If the AC power light flashes amber during charging, either the NOTE battery pack is malfunctioning, or it is not receiving correct input from the AC power supply. Disconnect the AC power cord/cable and remove the battery pack. See information on replacing the main battery. HINT: Be careful not to confuse the battery light ( off light ( ), and the power button light (near the upper-left corner of the keyboard).
Page 112: Determining Remaining Battery Power
Click Start, Control Panel, Performance and Maintenance, and then TOSHIBA Power Saver. Click the TOSHIBA Power Saver icon. The Power Saver Properties window appears. The remaining battery charge is indicated on the left side of the dialog box.
Page 113: Setting Battery Alarms
To change the default alarm settings: Click Start, Control Panel, Performance and Maintenance, and then TOSHIBA Power Saver. Click the Setup Action tab. Configure the Alarm settings to suit your needs. Mobile Computing Monitoring main battery power “Hibernation mode”...
Page 114: Conserving Battery Power
Toshiba has combined these options into preset Power Profiles. Using one of these profiles lets you choose between maximum power savings and peak system performance. You may also set individual power-saving options to suit your own needs.
Page 115 The TOSHIBA Power Saver Properties window appears. (Sample Image) TOSHIBA Power Saver Properties window Select an appropriate profile for your work environment or create your own custom profile. By changing the options that appear in the Power Saver Properties dialog box and clicking OK, you can reconfigure that function.
Page 116: Using A Hot Key To Set The Power Profile
Normal, DVD Playback, Presentation, and Long Life. Release the The pop-up window disappears. You are now in the selected mode. For more information on setting the battery Power Profile, “TOSHIBA Power Saver” on page simultaneously to display the Power key. , press until you select the...
Page 117: Changing The Main Battery
Changing the main battery When your main battery has run out of power, you have two options: plug in the AC adaptor or install a charged main battery. Never short circuit the battery pack by either accidentally or intentionally bringing the battery terminals in contact with another conductive object.
Page 118 Mobile Computing Changing the main battery Slide the battery release lock to the unlocked position. (Sample Illustration) Unlocking the battery release lock Slide the battery release latch to release the battery. Pull the discharged battery out of the computer. (Sample Illustration) Removing the battery...
Page 119: Inserting A Charged Battery
If the battery is leaking or its case is cracked, put on protective gloves to handle it, and discard it immediately. Always dispose of used battery packs in compliance with all applicable laws and regulations. Put insulating tape, such as cellophane tape, on the electrode during transportation to avoid a possible short circuit, fire or electric shock.
Page 120: Taking Care Of Your Battery
Mobile Computing Taking care of your battery Slide the battery lock to the locked position. (Sample Illustration) Locking the battery release lock Turn the computer right side up. Reconnect any cables that were removed in step 3 of “Removing the battery from the computer” on page Restart the computer.
Page 121: Maintaining Your Battery
If a battery is leaking or damaged, replace it immediately. Use protective gloves when handling a damaged battery. To replace the main battery, use an identical battery that you can purchase through the Toshiba Web site at accessories.toshiba.com. A reverse polarity condition should be avoided with all batteries.
Page 122 Mobile Computing Taking care of your battery Operate the computer on battery power for five minutes. If the battery pack has at least five minutes of operating time, continue operating until the battery pack is fully discharged. If the battery light flashes or there is some other warning to indicate a low battery, go to step 4.
Page 123: Disposing Of Used Batteries
Please be kind to our shared environment. Check with your local government authority for details regarding where to recycle old batteries or how to dispose of them properly. If you cannot find the information you need elsewhere, call Toshiba at: (800) 457-7777. Mobile Computing Disposing of used batteries...
Page 124: Traveling Tips
Always travel with the computer in a carrying case. Toshiba offers a choice of carrying cases for the computer. They all provide plenty of extra space for manuals, power cords, and compact discs. Contact your authorized Toshiba representative for more information or visit Toshiba’s Web site at accessories.toshiba.com.
Page 125: Chapter 4: Exploring Your Computer's Features
Chapter 4 Exploring Your Computer’s Features In this chapter, you will explore some of the special features of your notebook computer. Exploring the desktop The desktop is the launching pad for everything you can do in the Windows programs, find documents, set up system components, and perform most other computing tasks.
Page 126: Finding Your Way Around The Desktop
Exploring Your Computer’s Features Exploring the desktop Finding your way around the desktop Your computer’s desktop includes several standard features: icons, Start button, Taskbar, System tray, and background pattern. Icons Start button (Sample Image) Windows Icons An icon represents a folder, file, or program that can be quickly activated by double-clicking the icon.
Page 127: Start Button
The icons initially displayed on your system desktop include: Recycle Bin — Holds files you have deleted. You may be able to retrieve these files until you empty the Recycle Bin. TECHNICAL NOTE: If you delete a file from a diskette or flash media, it does not go into the Recycle Bin.
Page 128: Setting Up For Communications
Exploring Your Computer’s Features Setting up for communications Taskbar Each time you open a program, a button associated with that program appears on the Taskbar. With some programs, a button appears on the Taskbar for each document or window you open. You can use these buttons to quickly switch between the programs or windows.
Page 129 Exploring Your Computer’s Features Determining the COM port Your modem (available on certain models) is connected to one of the computer’s COM (communications) ports. The default setting for the modem is COM3. The following procedure is intended to support you if you need to either upgrade your modem or reset the port to the default settings.
Page 130: Connecting The Modem To A Telephone Line
Send a fax directly from your computer. For more detailed information regarding your computer’s modem, visit Toshiba’s Web site at accessories.toshiba.com. Before you can communicate using the modem, you need to connect it to a telephone line. Your computer’s built-in modem port provides an RJ-11 jack, allowing you to connect the modem to a standard voice-grade telephone line.
Page 131 Plug one end of a telephone cable (purchased separately) into the modem port on the right side of the computer. (Sample Illustration) Connecting the telephone cable to the modem port Connect the other end to the RJ-11 wall jack. (Sample Illustration) Connecting to a wall jack Connect the built-in modem only to ordinary analog phone NOTE lines.
Page 132: Connecting Your Computer To A Network
Exploring Your Computer’s Features Setting up for communications Now you are ready to send a fax or use the modem to connect to an online service or the Internet. Connecting your computer to a network You can connect your computer to a network to increase its capabilities and functionality using one of its communication ports.
Page 133 How to disable the Ethernet LAN port When your computer starts, Windows attempts to contact a Dynamic Host Configuration Protocol (DHCP) server. If the computer is not connected to a network, it may pause a few minutes as it waits for a reply. To avoid this delay, you can reconfigure Windows to disable the LAN port.
Page 134: An Overview Of Using The Internet
Exploring Your Computer’s Features An overview of using the Internet Your system may come with an optional wireless LAN module. This is a technology that expands wireless communication beyond networking equipment, and can connect many different kinds of electronic devices without the need for cables.
Page 135: The Internet
The Internet The Internet is an association of thousands of networks and millions of computers around the world connected by communications lines. They all work together to share information. The World Wide Web The World Wide Web (or “Web”) is a subset of the Internet —...
Page 136: Connecting To The Internet
Exploring Your Computer’s Features An overview of using the Internet Connecting to the Internet To connect to the Internet, you need: A modem (available on certain models) and telephone line, or a LAN connection A Web browser An Internet Service Provider (ISP) account The Microsoft automatically configured on your system so that when you first start it, it guides you through signing up for a new ISP...
Page 137: Surfing The Internet
Surfing the Internet Once connected to the Internet, the Web browser displays a home page, for example, your ISP’s home page on the Internet or your company’s Web site home page. To visit a desired Web site, type in the Web address. The Web address, or Uniform Resource Locator (URL), is a unique identifier for that computer system linked to the Internet.
Page 138: Uploading To, And Downloading Files From, The Internet
Exploring Your Computer’s Features Exploring audio features Internet news groups A news group is similar to a chat room, but instead of using a dedicated site to converse about a specialized subject with others in real-time, it uses a Web site as a clearinghouse where all the messages are placed, like a gigantic bulletin board.
Page 139: Using A Microphone
Using a microphone Connect an external microphone to the computer. Click Start, All Programs, Accessories, Entertainment, and then Sound Recorder. Positioning (Sample Image) Sound Recorder screen Click the Record button. Speak normally into the microphone. When you have finished recording, click the Stop button. The Sound Recorder window displays the new sound file as a waveform.
Page 140: Using External Speakers Or Headphones
Exploring Your Computer’s Features Exploring audio features Using external speakers or headphones Your computer is equipped with a full stereo sound system with internal speakers. Instead of using the internal speakers, you can connect headphones or a pair of external stereo speakers.
Page 141: Using Pc Cards
Using PC Cards TECHNICAL NOTE: For PCMCIA-compatible PC Cards, check the package to make sure they conform to the PCMCIA 2.1 standard (or later). Other cards may work with your computer, but are likely to be much more difficult to set up and use. Your notebook computer comes with a PC Card slot and supports two types of PC Cards that you can install: Type I cards...
Page 142: Removing A Pc Card
Exploring Your Computer’s Features Using PC Cards Removing a PC Card Be sure to disable the PC Card prior to removing it. Otherwise, the system may be damaged. Before removing a PC Card, make sure that no applications or NOTE system services are using the card.
Page 143: Setting Up A Pc Card For Your Computer
PDAs, digital cameras, digital video camcorders, etc. The Bridge Media Adapter slot may also support other types of media. For a complete list of supported media, visit Toshiba’s Web site at accessories.toshiba.com. Do not use the Copy Disk function for this type of media. To NOTE copy data from one media to another, use the drag-and-drop feature of Windows.
Page 144: Inserting Memory Media
Exploring Your Computer’s Features Using the Bridge Media Adapter Slot Inserting memory media The following instructions apply to all types of supported media devices. Turn the media so that the contacts (metal areas) are face down. Push the media into the adapter until it locks in place. (Sample Illustration) Inserting memory media When inserting memory media, do not touch the metal contacts.
Page 145: Using The I.link® Port
Grasp the card and pull it straight out. (Sample Illustration) Removing memory media Do not remove memory media while data is being written or read. Even when the Windows message “copying...” disappears, writing to the media might still be in progress and your data could be destroyed.
Page 146: Chapter 5: Toshiba Utilities
These utilities are described in this chapter. TOSHIBA Assist Supervisor password User password PC Diagnostic Tool Utility Fn-esse® TOSHIBA Hotkey Utility TOSHIBA SD™ Memory Card Format Utility TOSHIBA Power Saver Mouse Utility Toshiba Hardware Setup TOSHIBA Zooming Utility CD/DVD Drive Acoustic Silencer TOSHIBA Accessibility...
Page 147: Toshiba Assist
The TOSHIBA Assist provides quick access to computer functions and allows you to customize a range of computer settings. To access TOSHIBA Assist, do one of the following: Double-click the TOSHIBA Assist shortcut icon on the desktop. Click Start, All Programs, Toshiba, Utilities, and then TOSHIBA Assist.
Page 148: Connect
Toshiba Utilities TOSHIBA Assist The TOSHIBA Assist offers four categories of options: Connect Secure Protect & Fix Optimize Connect The features available in this category are: ConfigFree™ ConfigFree Bluetooth Bluetooth Local COM Settings (available on certain models) (Sample Image) TOSHIBA Assist window – Connect tab...
Page 149: Secure
Secure The features available in this category are: User password Supervisor password (Sample Image) TOSHIBA Assist window – Secure tab Toshiba Utilities TOSHIBA Assist...
Page 150: Protect & Fix
Toshiba Utilities TOSHIBA Assist Protect & Fix The feature available in this category is: PC Diagnostic Tool Utility (Sample Image) TOSHIBA Assist window – Protect & Fix tab...
Page 151: Optimize
TOSHIBA Power Saver Mouse Utility Toshiba Hardware Setup TOSHIBA Zooming Utility CD/DVD Drive Acoustic Silencer TOSHIBA Accessibility TOSHIBA Touch and Launch Utility Fingerprint Authentication Utility models) (Sample Image) TOSHIBA Assist window – Optimize tab Toshiba Utilities TOSHIBA Assist Fn-esse® (available on certain...
Page 152: Setting Passwords
When you set a password, you must enter the password before you can work on your computer again. Toshiba supports several types of passwords on your computer: An instant password — Secures your open programs and files when leaving the computer temporarily.
Page 153: Using A User Password
A user password provides instant password and power-on password protection. Setting a user password To register a password for the power-on password functions: Click Start, All Programs, Toshiba, Utilities, and then TOSHIBA Assist. The TOSHIBA Assist window appears. On the left side, click the Secure tab.
Page 154 Enter the password again, then click OK. Click OK to exit. Deleting a user password To cancel the power-on password function: Click Start, All Programs, Toshiba, Utilities, and then TOSHIBA Assist. The TOSHIBA Assist window appears. On the left side, click the Secure tab.
Page 155: Using A Supervisor Password
A supervisor password prevents other users from changing hardware configuration options. Setting a supervisor password If you choose to set a supervisor or user password, Toshiba strongly recommends that you save your password in a location where you can later access it should you not remember it.
Page 156 Enter the password again, then click OK. Click OK to exit. Deleting a supervisor password To cancel the power-on password function: Click Start, All Programs, Toshiba, Utilities, and then TOSHIBA Assist. The TOSHIBA Assist window appears. On the left side, click the Secure tab.
Page 157: Pc Diagnostic Tool Utility
Refer to the online Help documentation within the application for additional help. To use the PC Diagnostic Tool utility: Click Start, All Programs, Toshiba, Utilities, and then PC Diagnostic Tool, or click the PC Diagnostic Tool icon in the Protect & Fix tab of The PC Diagnostic Tool window appears.
Page 158: Fn-Esse
You can assign any key that is not associated with a hot key or a keyboard overlay. ® Starting Fn-esse Click Start, All Programs, Toshiba, Utilities, and then Fn-esse, or click the Hotkey Assignment icon in the Optimize tab of The Fn-esse keyboard appears.
Page 159: Using Drag-And-Drop To Assign A Key
The program or document is now associated with the key you just selected. To open the program or document, press plus the appropriate key from within any Windows program. Toshiba Utilities Fn-esse® ® Explorer (or the ®...
Page 160: Using The Keyboard Or Pointing Device To Assign A Key
Toshiba Utilities Fn-esse® Using the keyboard or pointing device to assign a key To assign a key to open a program or document: Start Fn-esse. Perform one of the following: Using the keyboard, press and hold the press the desired assignment key.
Page 161: Viewing Existing Key Assignments
Fn-esse displays the Assignment Type dialog box. To change the key assignment, click Direct or Popup and continue as if you were creating a new assignment. To remove the key assignment, click Clear. plus the appropriate key from within any ® -based program. Toshiba Utilities Fn-esse®...
Page 162: Toshiba Hotkey Utility
Toshiba Utilities TOSHIBA Hotkey Utility TOSHIBA Hotkey Utility The TOSHIBA Hotkey utility allows you to receive a confirmation message when you use the Hotkey combination for Standby [ To activate the Hotkey utility: Click Start, All Programs, Toshiba, Utilities, and then Hotkey utility.
Page 163: Toshiba Sd™ Memory Card Format Utility
This utility is used to format SD Media Adapter slot. To format an SD memory card using this utility: Click Start, All Programs, Toshiba, Utilities, and then SD Memory Card Format, or click the SD Memory Card icon in the Optimize tab of The TOSHIBA SD Memory Card Format screen appears.
Page 164: Toshiba Power Saver
The TOSHIBA Power Saver Properties window appears. (Sample Image) TOSHIBA Power Saver Properties window The Profile panel on the left of the TOSHIBA Power Saver Properties window shows the power profiles used to control power usage for both AC power and battery power, as well as the estimated battery life for each power profile mode.
Page 165: Preset Power Profiles
Customizing a power profile Select the profile to be customized in the Profile panel. Make the desired changes to the settings on the Basic Setup tab and the Setup Action tab. Click Apply, then OK. Toshiba Utilities TOSHIBA Power Saver...
Page 166: Mouse Utility
Toshiba Utilities Mouse Utility Mouse Utility The Mouse utility allows you to change your pointing device or mouse settings. To access the Mouse utility: Click Start, Control Panel, and then Mouse, or click the Mouse icon in the Optimize tab of The Mouse Properties screen appears.
Page 167: Toshiba Hardware Setup
Toshiba Hardware Setup is the Toshiba configuration management tool available through the Windows system. To access it: Click Start, All Programs, Toshiba, Utilities, Assist, or click the Toshiba Hardware Setup icon in the Optimize tab of TOSHIBA The Toshiba Hardware Setup screen appears.
Page 168 Toshiba Utilities Toshiba Hardware Setup Display—Allows you to change various default settings for the built-in LCD display When the computer restarts, it remembers the last NOTE configuration. If data does not appear on the display you are using after starting in Standby Mode, press Fn + F5. For more information, see on the computer”...
Page 169: Toshiba Zooming Utility
Apply, you can reconfigure that function. Any options that you change will become default settings when you restart your system. TOSHIBA Zooming Utility This utility allows you to select which applications will work with the zoom in/out hot keys (see...
Page 170 The zoom in and zoom out hot keys will now work with the applications you selected. To zoom in, hold down the hold down the For more information about how to use the TOSHIBA Zooming utility, right click the then click Help. TOSHIBA...
Page 171: Cd/Dvd Drive Acoustic Silencer
Click Set Quiet Mode to make the drive run more slowly and quietly for listening to music or audio files on a CD. Click Set Normal Mode to run the drive at normal speed for transferring data. Toshiba Utilities CD/DVD Drive Acoustic Silencer Assist.
Page 172: Toshiba Accessibility
Toshiba Utilities TOSHIBA Accessibility TOSHIBA Accessibility The TOSHIBA Accessibility utility allows you to use the key to create a hot key combination with one of the function keys without pressing the two keys simultaneously as is usually required. Using Accessibility lets you make the a sticky key, meaning you can press it once, release it, and then press a function key to activate the hot key function.
Page 173: Toshiba Touch And Launch Utility
A blue circle within the TOSHIBA Touch and Launch window represents your finger location on the TouchPad. As you move the blue circle over an icon in the TOSHIBA Touch and Launch window, the icon is highlighted or selected. Release your finger from a selected icon to choose the icon’s function.
Page 174 If the icon is highlighted in orange and selected, the function corresponding to the selected icon launches and the TOSHIBA Touch and Launch window closes. If the icon is highlighted in blue and selected, the function corresponding to the selected icon launches and the TOSHIBA Touch and Launch window remains open.
Page 175: Toshiba Touch And Launch Settings
TOSHIBA Touch and Launch is controlled/adjusted via an icon on the system tray. The icon will change color when the TOSHIBA Touch and Launch is active. Double-click the icon to open the TOSHIBA Touch and Launch Settings window. Right-click the icon to see the following shortcuts:...
Page 176: Disabling Or Enabling Toshiba Touch And Launch
The Option button allows you to define how folders will open, define visual effects, and control when to show help. A list of tables appears in the Table section of the TOSHIBA Touch and Launch Settings window. These are the same items (icons) you can choose in the Corner Assignment section of the TOSHIBA Touch and Launch Settings.
Page 177: Fingerprint Authentication Utility
Toshiba does not guarantee that the fingerprint utility will accurately screen out unauthorized users at all times. Toshiba is not liable for any failure or damage that might arise out of the use of the fingerprint software or utility.
Page 178 Toshiba Utilities Fingerprint Authentication Utility Click the button above the finger you want to enroll. Swipe your finger on the reader. A sample will be created and indicated by a Fingerprint icon. Repeat the previous step. Swipe the same finger on the reader two more times to create two more samples.
Page 179: Fingerprint Logon
You have 40 seconds to swipe your fingerprint. If the authentication fails, the system tries again up to two more times. If authentication fails after the third attempt, the system shuts down. Toshiba Utilities Fingerprint Authentication Utility ® user account. ®...
Page 180 Toshiba Utilities Fingerprint Authentication Utility Enabling Power-on Security Options for power-on security are displayed only if your computer supports this feature. In most configurations, power-on security is enabled automatically after the first user fingerprints are enrolled. To disable/enable power-on security: Open the Control Center and go to Settings - Power-on Security.
Page 181: Control Center
Import or Export User Data—Existing fingerprints can be exported to a *.vtp file and imported back to your fingerprint software. The *.vtp file is encrypted and protected by a password that is defined during export. Toshiba Utilities Fingerprint Authentication Utility...
Page 182 Toshiba Utilities Fingerprint Authentication Utility Settings System Settings—Opens the Settings dialog containing various options for setting up the product. Most of these settings can be modified only by administrators and affect all users. User Settings—Opens the User Settings dialog containing user-specific options for setting up the product.
Page 183: Password Bank
Web browser, click it in the list. Register—Registers a new window (dialog or Web page). Lock/unlock My Safe—Opens or closes My Safe folder. Control Center—Displays Control Center. Help—Displays this help file. Toshiba Utilities Fingerprint Authentication Utility key while Shift...
Page 184 Toshiba Utilities Fingerprint Authentication Utility Registering a new Web page or dialog You are logged on to the computer and want to register a new Web page. To create a new registration: Display a Web page you want to register.
Page 185 Sometimes it is useful to edit an existing registration. For example, your company’s address may have changed and you want to update your registrations. To edit an existing registration: Click the Settings topic in the Control Center. Click User Settings. Verify your fingerprint. Select Registrations. Toshiba Utilities...
Page 186 Select a registration. Click Delete. How to Delete the Fingerprint Data Fingerprint data is stored in the non-volatile memory. If the computer changes ownership, Toshiba recommends the following procedure: Click Start, All Programs, Protector Suite QL, and then Control Center.
Page 187: Care And Maintenance Of Your Fingerprint Reader
Static electricity is a common cause of reader failures, especially during dry seasons such as winter. Clean the reader with a lint-free cloth. Do not use detergent to clean the reader. Fingerprint Authentication Utility key and select each fingerprint until they Control Toshiba Utilities...
Page 188 Toshiba Utilities Fingerprint Authentication Utility Avoid the following finger conditions for enrollment or recognition as they may result in fingerprint enrollment errors or a drop in the fingerprint recognition success rate. Soaked or swollen finger (e.g., after taking bath) Injured finger...
Page 189: Fingerprint Reader Limitations
Toshiba does not guarantee that the fingerprint reader will recognize the enrolled user or accurately screen out unauthorized users at all times. Toshiba is not liable for any failure or damage that might arise out of the use of this fingerprint recognition software or utility.
Page 190: Chapter 6: If Something Goes Wrong
This chapter aims to help you solve many problems by yourself. It covers the problems you are most likely to encounter. If all else fails, contact Toshiba. You will find information on Toshiba’s support services at the end of this chapter. Problems that are easy to fix Your program stops responding.
Page 191 To close a program that has stopped responding: Press , and Ctrl The Windows Task Manager window appears. Click the Applications tab. If a program has stopped responding, the words “not responding” appear beside its name in the list. Select the program you want to close, then click End Task.
Page 192: Problems When You Turn On The Computer
If Something Goes Wrong Problems when you turn on the computer Your program performs an illegal operation. If you receive the message, “ close the window and continue working. If it operation ” happens again, record the details of the message and consult the software manufacturer.
Page 193 Problems when you turn on the computer If you are using an AC adaptor, verify that the computer is receiving power from the external power source by looking at the AC power light. If the indicator is glowing, the computer is connected to a live external power source.
Page 194: The Windows Operating System Is Not Working
If Something Goes Wrong The Windows® operating system is not working Always save your data even when you are using Standby. If your battery fully discharges, information that has not been saved will be lost. Your computer can be configured to warn you when the battery is running low see the main battery runs low”...
Page 195: Using Startup Options To Fix Problems
The Windows® operating system is not working Unless a hardware device has failed, problems usually occur when you change the system in some way such as installing a new program or adding a device. If you experience any of these problems, use the options in the Startup menu to fix the problem.
Page 196: Internet Problems
If Something Goes Wrong The Windows® operating system is not working See your Windows If your computer is connected to a network, the Startup menu NOTE may display different versions of Safe mode. Internet problems My Internet connection is very slow. Many factors contribute to the speed with which you can surf the Internet.
Page 197: Resolving A Hardware Conflict
Click a problem you would like help with from the listings and follow the on-screen instructions. You can connect to Support Online by clicking Support from the menu or by going to pcsupport.toshiba.com. Resolving a hardware conflict If you receive an error message telling you there is a device driver conflict or a general hardware problem, try using ®...
Page 198: Resolving Hardware Conflicts On Your Own
If Something Goes Wrong Resolving a hardware conflict The device most recently connected to the system is the one most likely to be causing a hardware conflict. Resolving hardware conflicts on your own Computer components need resources to accomplish a task. A device, such as a disk drive or a modem, needs a channel to the computer’s Central Processing Unit (CPU).
Page 199 Plug and Play With Plug and Play and the operating system, avoiding hardware conflicts is easy. Plug and Play is a computer standard that helps the system BIOS (basic input/output system) and the operating system to automatically assign system resources to Plug and Play-compliant devices. In theory, if every device connected to the computer is Plug and Play-compliant, no two devices will compete for the same system resources.
Page 200: Fixing A Problem With Device Manager
If Something Goes Wrong Resolving a hardware conflict Fixing a problem with Device Manager Device Manager provides a way to check and change the configuration of a device. Changing the default settings using Device Manager can cause other conflicts that make one or more devices unusable. Device Manager is a configuration tool for advanced users who understand configuration parameters and the ramifications of changing them.
Page 201 To check a device’s properties: Click Start, Control Panel, then click Performance and Maintenance. Click the Administrative Tools icon. Double-click Computer Management, then click Device Manager. To view the device(s) installed, double-click the device type. To view the properties, double-click the device. The operating system displays the Device Properties dialog box, which provides an array of tabs.
Page 202: Memory Problems
If Something Goes Wrong Resolving a hardware conflict Memory problems Incorrectly connected or faulty memory modules may cause errors that seem to be device-related. It is worthwhile checking for these first: Click Start, Turn off computer. Click Turn Off. The operating system shuts down and turns off the computer automatically.
Page 203 Here are some typical problems and how to solve them: The AC power light does not come on when you plug in the AC adaptor and power cord/cable. Make sure the AC adaptor and power cord/cable are firmly plugged into both the wall outlet and the computer. If the AC power light still does not come on, check that the wall outlet is working properly by plugging in a lamp or other appliance.
Page 204: Keyboard Problems
This is normal for all batteries. To purchase a new battery pack, see your accessories information that shipped with your computer, or visit the Toshiba Web site at accessories.toshiba.com. current on the most recent software and hardware options for your computer, and for other product information.
Page 205: Display Problems
You have connected an external keyboard and the operating system displays one or more keyboard error messages. The keyboard you connected may be defective or incompatible with the computer. Try using a different make of keyboard. Nothing happens when you press the keys on the external keyboard.
Page 206 If Something Goes Wrong Resolving a hardware conflict If you are using an external monitor: Check that the monitor is turned on. Check that the monitor’s power cord/cable is firmly plugged into a working power outlet. Check that the cable connecting the external monitor to the computer is firmly attached.
Page 207 A message displays saying that there is a problem with your display settings and that the adapter type is incorrect or the current settings do not work with your hardware. Reduce the size of the color palette to one that is supported by the computer’s internal display.
Page 208: Disk Drive Problems
If Something Goes Wrong Resolving a hardware conflict Disk drive problems Problems with the hard disk or with a diskette drive usually show up as an inability to access the disk or as sector errors. Sometimes a disk problem may cause one or more files to appear to have garbage in them.
Page 209 Click Start. Error-checking tests and repairs the disk. Your hard disk seems very slow. If you have been using your computer for a long time, your files may have become fragmented. Run Disk Defragmenter. To do this, click Start, All Programs, Accessories, System Tools, and then Disk Defragmenter.
Page 210: Optical Drive Problems
If Something Goes Wrong Resolving a hardware conflict The computer displays the message. If you are starting the computer from a diskette, the diskette in the drive does not have the files necessary to start the computer. Replace it with a bootable diskette. The drive cannot read a diskette.
Page 211: Sound System Problems
If you need to remove a disc and cannot turn on the computer (for example, if the battery is completely discharged), use a narrow object, such as a straightened paper clip, to press the manual eject button. This button is in the small hole next to the optical drive eject button on the face of the optical drive tray.
Page 212: Pc Card Problems
If Something Goes Wrong Resolving a hardware conflict The computer emits a loud, high-pitched noise. This is feedback between the microphone and the speakers. It occurs in any sound system when input from a microphone is fed to the speakers and the speaker volume is too loud. Adjust the volume control.
Page 213 If your system does not have built-in drivers for your PC Card and the card did not come with an operating system driver, it may not work under the operating system. Contact the manufacturer of the PC Card for information about using the card under the operating system.
Page 214 If Something Goes Wrong Resolving a hardware conflict The computer stops working (hangs) when you insert a PC Card. The problem may be caused by an I/O (input/output) conflict between the PCMCIA socket and another device in the system. Use Device Manager to make sure each device has its own I/O base address.
Page 215: Printer Problems
A PC Card error occurs. Reinsert the card to make sure it is properly connected. If the card is attached to an external device, check that the connection is secure. Refer to the card’s documentation, which should contain a troubleshooting section. Printer problems This section lists some of the most common printer problems.
Page 216: Modem Problems
The other system may be busy or off line. Try making a test transmission to someone else. For more information regarding your system’s V.92 modem, visit the Toshiba Web site at pcsupport.toshiba.com. 129.
Page 217: Wireless Networking Problems
To determine if your computer has an internal Wi-Fi adapter, NOTE check the device list in Device Manager (part of the Windows Control Panel). Some Toshiba models may have a Wi-Fi antenna switch even though they do not have an internal Wi-Fi adapter.
Page 218 If Something Goes Wrong Resolving a hardware conflict Check the Control Panel’s Device Manager to verify that the Wi-Fi adapter is recognized by Windows the driver is loaded. Carefully note any error messages— these will be very helpful if you should confer with a support technician at a later time.
Page 219 Use the PING command to verify a connection to the gateway at 192.168.1.1 (a default gateway for most wireless routers). Click Start, then click Run... Enter Cmd and press Enter. Enter PING 192.168.1.1 at the command prompt, and press Enter. If “Request Timed Out”...
Page 220: Dvd Operating Problems
If Something Goes Wrong DVD operating problems Select Allow me to connect to the selected wireless network, even though it is not secure. Windows XP will now try to establish a wireless connection. The Windows XP wireless management facility does not work.
Page 221 “Checking device properties” on page 200 instructions on using Device Manager to view the optical drive properties. Check the Toshiba Web site for new information on optical drives and their operation. A blank screen appears while watching a DVD-ROM movie or title.
Page 222 If Something Goes Wrong DVD operating problems Next to the words Desktop Area, move the slider to a lower setting, such as 800 x 600 or 640 x 480. Click OK. DVD titles, games, or applications appear distorted. Having Stretch enabled when your video resolution is set to 640 x 480 or 800 x 600 can cause distortion.
Page 223: Develop Good Computing Habits
Click None. Click OK. Develop good computing habits Save your work frequently. You can never predict when your computer will lock, forcing you to close a program and lose unsaved changes. Many software programs build in an automatic backup, but you should not rely solely on this feature.
Page 224: Data And System Configuration Backup In Windows Xp
If Something Goes Wrong Develop good computing habits Read the user’s guides. It is very difficult to provide a fail-safe set of steps you can follow every time you experience a problem with the computer. Your ability to solve problems will improve as you learn about how the computer and its software work together.
Page 225 Follow these steps to create a Restore Point using the System Restore utility: Click Start, and then Help and Support. Under Pick a Task, click Undo changes to your computer with System Restore. Click Create a restore point, and then click Next. In the Restore point description field, enter a name that is descriptive enough to be easily understood in the future, such as “Before installing Brand X Accounting...
Page 226 CDs, a relatively high-capacity storage media. No additional software is required. Most of the CD and DVD drives built into recent Toshiba portable computer models can write to (or ‘burn’) as well as read from CDs.
Page 227 NOTE Documents and other data files that you create as you work are typically stored in the My Documents folder. You may also wish to back up other important data files stored elsewhere on your hard disk drive, for example: E-mail files and settings—for Outlook, Outlook Express, or other e-mail applications.
Page 228 If Something Goes Wrong Develop good computing habits Favorites (bookmarks) for Internet Explorer Follow these steps to back up your Favorites for Internet Explorer (ver 5.0 or newer): In Internet Explorer, click File, Import and Export. The Import/Export Wizard will appear. Click Next. Click Export Favorites, Next.
Page 229 General tips for installing hardware and software Here are a few tips to help ensure safe and easy installation of new hardware (printers, pointing devices, external hard drives, DVD writers, scanners, etc.) and software (applications like Microsoft Office and Adobe such as special toolbars for your web browser).
Page 230: If You Need Further Assistance
Since some problems may be related to the operating system or the program you are using, it is important to investigate other sources of assistance first. Try the following before you contact Toshiba: Review the troubleshooting information in your operating system documentation.
Page 231: Contacting Toshiba
Go to the Tech Support Center, select your particular model from the list and go to the Detailed Specifications for that model. For the number of a Toshiba dealer near you in the United States, call: (800) 457-7777. Contacting Toshiba If you still need help and suspect that the problem is hardware- related, Toshiba offers a variety of resources to help you.
Page 232: Other Toshiba Internet Web Sites
Information about what you were doing when the problem occurred Exact error messages and when they occurred For technical support, call the Toshiba Global Support Centre: Within the United States at (800) 457-7777 Outside the United States at (949) 859-4273 Other Toshiba Internet Web sites toshiba.com...
Page 233 United States Toshiba America Information Systems, Inc. 9740 Irvine Boulevard Irvine, California 92618 United States For more information on additional Toshiba worldwide locations, please visit: www.toshiba.co.jp/index.htm. If Something Goes Wrong Toshiba’s worldwide offices Japan Toshiba Corporation, PCO-IO 1-1, Shibaura 1-Chome...
Page 234: Appendix A: Hot Keys
Appendix A Hot Keys Hot keys are keys that, when pressed in combination with the key, turn system functions on and off. Hot keys have a legend on the key indicating the option or feature the key controls. Volume Mute This hot key enables/disables volume mute on your computer.
Page 235: Password Security
Password security This hot key blanks the display. Without a password activates instant security. Using the pointing device or any key will make the display’s content reappear, if no password is set for the current user. With a password activates instant security. If you set a blank screen saver, pressing the combination to activate instant security will cause the screen to go blank.
Page 236: Maintaining Security When The Battery Is Not Fully Charged
Hot Keys Password security Click the On resume, password protected check box. Click OK. Maintaining security when the battery is not fully charged When the battery is not fully charged (even if the computer is operating on AC power) your display may reappear automatically after a short time.
Page 237: Power Profile
This hot key displays the power profile pop-up window and cycles through the power profiles. (Sample Image) Power profiles The properties of each power profile are set in the TOSHIBA Power Saver utility. For more information, see page Standby mode This hot key places the computer into Standby mode.
Page 238: Hibernation Mode
Hot Keys Hibernation mode Hibernation mode This hot key places the computer into Hibernation mode. If Hibernation mode is enabled (the default) a message box displays by default to confirm the computer is entering Hibernation mode. You can choose not to display this message box. (Sample Image) Hibernation confirmation box If Hibernation mode is disabled, this hot key will not respond.
Page 239: Display Modes
Display modes This hot key cycles through the power-on display options. The display modes are: (Sample Image) Display options window To use a simultaneous mode, you must set the resolution of the internal display panel to match the resolution of the external display device. Display brightness This hot key decreases the screen brightness.
Page 240: Disabling Or Enabling Wireless Devices
Hot Keys Disabling or enabling wireless devices Disabling or enabling wireless devices This hot key enables/disables the optional wireless devices installed in your computer. The wireless modes are: Disabling or enabling the TouchPad This hot key enables/disables the TouchPad. For more information on using the TouchPad, see “Disabling or enabling the TouchPad™”...
Page 241: Zooming Applications In/Out
This hot key turns the numeric overlay on and off. This hot key turns the scroll lock feature on and off. This hot key switches screen resolution. [Space bar] Hot Keys Zooming applications in/out “TOSHIBA Zooming 169. “TOSHIBA Zooming 169.
Page 242: Appendix B: Power Cord/Cable Connectors
Appendix B Power Cord/Cable Connectors Your notebook computer features a universal power supply you can use worldwide. This appendix shows the shapes of the typical AC power cord/cable connectors for various parts of the world. USA and Canada UL approved CSA approved Australia AS approved...
Page 243: Toshiba Computer
Appendix C Using ConfigFree your Toshiba Computer All references to Bluetooth NOTE only if Bluetooth is available on your system. ™ ConfigFree communication devices and network connections. ConfigFree also lets you identify communication problems and create profiles for easy switching between locations and communication networks.
Page 244: Getting Started
Click Start, All Programs, Toshiba, Networking, and then ConfigFree. Double-click the ConfigFree icon Press the TOSHIBA Assist button (if applicable to your system) to open the TOSHIBA Assist, and then click the ConfigFree icon. Click the ConfigFree icon click the desired utility.
Page 245: Configfree Utilities
Using ConfigFree™ with your Toshiba Computer If your computer is not connected to a network, the ConfigFree NOTE icon on the Taskbar is displayed with an “X.” When you start a search for wireless devices, ConfigFree Launcher displays on your computer desktop. You can then click the appropriate icon on the Launcher to start the desired ConfigFree utilities.
Page 246: Configfree Utilities
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities (Sample Image) ConfigFree Launcher coming back into view ConfigFree Utilities Connectivity Doctor The Connectivity Doctor lets you analyze your network connections and fix network connection problems. Using Connectivity Doctor, you can view detailed network information by simply moving the mouse pointer.
Page 247 Using ConfigFree™ with your Toshiba Computer Location of wireless communication switch (identified with a yellow arrow) Status of wireless communication switch (on or off) (Sample Image) Connectivity Doctor screen Moving the mouse pointer over a wired or wireless network device icon displays information about the device, such as its IP address, subnet mask, and MAC address.
Page 248 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities If a problem or potential problem is detected, in most cases, a screen automatically displays showing you the possible cause and solution for the problem. A triangle containing an exclamation point also appears on the Connectivity Doctor screen, and an orange frame describes the relevant location.
Page 249: Search For Wireless Devices
Using ConfigFree™ with your Toshiba Computer Search for Wireless Devices The Search for Wireless Devices utility searches for wireless LAN and Bluetooth neighborhood, and displays information about them on a virtual map. To search for wireless devices: Click the Click Search for Wireless Devices.
Page 250 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities (Sample Image) Viewing Wi-Fi devices Creating a new wireless connection This feature is only supported on systems running Windows NOTE XP SP2. To add a new wireless connection to an Access Point: Open the Search for Wireless Devices option from ConfigFree Launcher.
Page 251 Using ConfigFree™ with your Toshiba Computer (Sample Image) Dragging a device to the Access Point (Sample Image) Wireless settings screen Enter the SSID/WEP information and connect to the device. After the Access Point is set up and added to the connection...
Page 252 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Creating a detected device wireless connection The following screen shows an example of Bluetooth devices that are detected using the Search for Wireless Devices option. Moving the mouse cursor over a device icon displays information about the device.
Page 253 Using ConfigFree™ with your Toshiba Computer (Sample Image) Dragging the file to the Bluetooth To be prompted for the device: Drag and drop the file to the Bluetooth ConfigFree Launcher. (Sample Image) Dragging the file to the Bluetooth Or, you can right-click the file and select Send to Bluetooth Devices.
Page 254: Profile Settings
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Choose a file recipient. Click Send. During a file transfer, connecting and disconnecting to the NOTE selected device will occur automatically. Disconnecting from a Bluetooth To disconnect from a Bluetooth Place the cursor on top of the connected line. The icon changes to a pair of scissors.
Page 255 Using ConfigFree™ with your Toshiba Computer TCP/IP settings—includes DHCP, IP address, subnet mask, default gateway, DNS server, and WINS server settings Personal firewall settings for Internet connections Dial-up connection settings for the default connection File and printer sharing settings Printer settings for the default printer ®...
Page 256 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Under Execute this program after switching, click the Browse button and select the program, file, or Web site URL that is to start after switching to this profile. For example, to have Internet Explorer start in the Windows operating system after switching profiles, type: C:\Program Files\Internet Explorer\IEXPLORE.EXE...
Page 257: Configfree Summit
Using ConfigFree™ with your Toshiba Computer The online Help provides real-world examples of setting up NOTE profiles for different networking environments. After you set up one or more profiles, you can check their settings and fine-tune them as necessary. Profiles can also be imported and exported.
Page 258 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities (Sample Image) Inviting users to SUMMIT meeting When a user joins the SUMMIT, their icon appears on the SUMMIT table. (Sample Image) Users attending SUMMIT meeting (user icons appear on SUMMIT table) Files can be shared with one user or all users attending the meeting.
Page 259 Using ConfigFree™ with your Toshiba Computer (Sample Image) Sharing a file with one user To share a file with all users, drag the file to the center of the SUMMIT table where users can access it as desired. If you are the Host of the summit, and drag a file to the center of...
Page 260 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Using ConfigFree SUMMIT To host a ConfigFree SUMMIT: Click the Click SUMMIT. Other users appear on the SUMMIT main window. SUMMIT can also be started from the ConfigFree Launcher. NOTE Select the appropriate users and invite them to the SUMMIT meeting.
Page 261: Quick Connect
Projector (DPJ), then click Connect. Launching Quick Connect prevents you from using the network to connect to a Toshiba Wireless Projector when the wireless LAN Configuration is set to Ad Hoc. If you are connected to an access point, the connection is broken and re- established later.
Page 262 Because the wireless LAN’ s default connection setting is for NOTE Ad Hoc mode, the Toshiba Wireless Projector will not connect if the projector is set to Infrastructure mode. If this occurs, you can change the wireless LAN’ s connection setting to Infrastructure mode to match the settings on the projector.
Page 263 If you close ConfigFree Direct Link Toshiba Device When Access Point is not available, use the Direct Link Toshiba Device feature to connect your computer in Ad Hoc (peer-to-peer) mode and use the Summit feature. To use this feature: Display the ConfigFree menu.
Page 264: Using The Automatic Switch
Using ConfigFree™ with your Toshiba Computer Using the Automatic Switch Using the Automatic Switch The Automatic Switch feature allows the computer to automatically switch profiles the next time it is powered on. This feature is particularly useful if you want your computer to automatically switch from the network configuration you use in your office to the one you use at home.
Page 265 Using ConfigFree™ with your Toshiba Computer Click Auto Switch. The Auto Switch dialog box appears. Select the Auto Switch (SSID) tab. Select the profile to be automatically selected when the SSID is detected, then click Add. The profile is moved to the List of target SSIDs and profiles.
Page 266: Glossary
Glossary TECHNICAL NOTE: Some features defined in this glossary may not be available on your computer. Acronyms The following acronyms may appear in this user’s guide. BIOS CD-ROM CD-RW CMOS COM1 COM2 alternating current basic input/output system bits per second compact disc compact disc read-only memory compact disc rewrite memory...
Page 267 direct memory access DIMM dual inline memory module disk operating system dots per inch DSTN dual supertwist nematic digital versatile (or video) disc DVD-ROM digital versatile (or video) disc read-only memory enhanced capabilities port EPROM erasable programmable read-only memory file allocation table Federal Communications Commission gigabyte hard disk drive...
Page 268 Glossary SCSI SDRAM SRAM SVGA Terms The following terms may appear in this user’s guide. active-matrix display — A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix technology. Also known as a “TFT display,” in its simplest form there is one thin film transistor (TFT) for each cell.
Page 269 application — A computer program that you use to perform tasks of a specific type. Applications include word processors, spreadsheets, and database management systems. See also program. backup — A copy of a file, usually on a removable disk, kept in case the original file is lost or damaged.
Page 270 Glossary cache — A section of very fast memory in which frequently used information is duplicated for quick access. Accessing data from cache is faster than accessing it from the computer’s main memory. See also CPU cache, L1 cache, L2 cache. CD —...
Page 271 CPU — See central processing unit (CPU). CPU cache — A section of very fast memory residing between the CPU and the computer’s main memory that temporarily stores data and instructions the CPU will need to execute commands and programs. See also cache, L1 cache, L2 cache.
Page 272 Glossary disk drive — The device that reads and writes information and programs on a diskette or hard disk. It rotates the disk at high speed past one or more read/write heads. diskette — A thin, flexible disk in a protective jacket that stores magnetically encoded data.
Page 273 executable file — A computer program that is ready to run. Application programs and batch files are examples of executable files. Names of executable files usually end with a .bat or .exe extension. expansion device — A device that connects to a computer to expand its capabilities.
Page 274 — The physical components of a computer system. Compare software. Hibernation — A feature of many Toshiba notebook computers that saves to the hard disk the current state of your work, including all open files and programs, when you turn the computer off. When you turn on the computer again, your work is returned to the same state it was when the computer was turned off.
Page 275 Internet — The decentralized, world-wide network of computers that provides electronic mail, the World Wide Web, and other services. See also World Wide Web. keyboard shortcut — A key or combination of keys that you use to perform a task instead of using a pointing device such as a mouse. L1 (level one) cache —...
Page 276 Glossary MIDI (Musical Instrument Digital Interface) — A standard for connecting musical instruments, synthesizers, and computers. The MIDI standard provides a way of translating music into a form computers can use, and vice versa. modem — Short for “modulator/demodulator.” A device that converts information from digital to analog, and back to digital, enabling information to pass back and forth between digital computers and analog telephone lines.
Page 277 optical drive — A drive which reads plastic coated discs on which information is recorded digitally and uses a laser to read data, music, or videos. palette — See color palette. parallel — Processes that occur simultaneously. In communications, it means the transmission of more than one bit of information at a time.
Page 278 Glossary properties — The attributes of an object or device. For example, the properties of a file include the file’s type, size, and creation date. RAM (random access memory) — Volatile memory that can be written to as well as read. Volatile here means that information in RAM is lost when you turn off your computer.
Page 279 “greater than” sign) indicating where users are to enter commands. Toshiba tablet pen — The writing instrument used with the tablet. It is stored on the right side of the computer. TFT display — See active-matrix display.
Page 280 Glossary Web — See World Wide Web. Wi-Fi — A registered trademark term of the Wi-Fi Alliance that stands for Wireless Fidelity, and is another term for the communication protocol to permit an Ethernet connection using wireless communication components. World Wide Web (www) — The worldwide network of Web sites linked together over the Internet.
Page 281: Index
48 not charging 203 power profile 237 power profile hot key 116 real-time clock (RTC) 107 removing 117 BIOS Setup see Toshiba Hardware Setup Bridge Media Adapter inserting memory media 144 removing memory media 144 button power 52 start 127...
Page 282 Device Manager 200 checking properties 200 disabling a device 200 devices keyboard 66 mouse 67 disable/enable TOSHIBA Touch and Launch Disk Defragmenter 209 disk drive corrupted/damaged data files 209 missing files/trouble accessing a disk 208 running slow 209 diskette drive...
Page 283 general hardware problem 197 non-system disk or disk error problem with display settings/ current settings not working with hardware 207 program has performed an illegal operation 192 warning resume failure 193 Error-checking 208 Ethernet LAN port 133 expansion memory slot 55 exploring the desktop 125 external monitor...
Page 284 Index Internet bookmarked site not found 196 connecting to 136 features 137 slow connection 196 surfing 137 uploading and downloading files URL address not found 196 using 134 Internet Explorer icon 127 Internet Service Providers 135 IRQ (Interrupt Request) 198 ISPs 135 jack RJ-11 131...
Page 285 210 changing display properties 207 checking device properties 200 computer hangs when PC Card computer will not power up 192 contacting Toshiba 230 corrupted/damaged data files 209 Device Manager 200 disabling a device 200 disk drive is slow 209...
Page 286 205 does not look normal/flickers 206 secondary button 62 set up communications 128 setting up adding memory 52 computer 43 TOSHIBA Touch and Launch setting up a connection 132 settings TOSHIBA Touch and Launch sound problem solving 211 sounds...
Page 287 66 Toshiba registering computer 44 worldwide offices 232 TOSHIBA Assist 147 Toshiba Hardware Setup 167 Toshiba online resources 104 TOSHIBA Touch and Launch 173 disable/enable 176 Toshiba utilities 146 traveling tips 124 troubleshooting DVD player general problems 220...

This manual is also suitable for:

Satellite m115 series M115-s1061 M115-s1064 M115-s1071 M115-s1074 M115-s3094 ... Show all

Toshiba Satellite M110 Series User Manual

Chapter 1: Getting Started

Chapter 2: Learning the Basics

Chapter 3: Mobile Computing

Chapter 4: Exploring Your Computer's Features

Chapter 5: Toshiba Utilities

Chapter 6: If Something Goes Wrong

Appendix A: Hot Keys

Appendix B: Power Cord/Cable Connectors

Appendix C: Using Configfree™ with Your

Quick Links

Related Manuals for Toshiba Satellite M110 Series

Summary of Contents for Toshiba Satellite M110 Series