Page 1 ® Satellite M110/M115 Series User’s Guide If you need assistance: ❖ Toshiba’s Support Web site pcsupport.toshiba.com ❖ Toshiba Global Support Centre Calling within the United States (800) 457-7777 Calling from outside the United States (949) 859-4273 For more information, see “If Something Goes Wrong”...
Page 2 TOSHIBA AMERICA INFORMATION SYSTEMS, INC. (“TOSHIBA”), ITS AFFILIATES AND SUPPLIERS DO NOT WARRANT THAT OPERATION OF THE PRODUCT WILL BE UNINTERRUPTED OR ERROR FREE. YOU AGREE THAT TOSHIBA,...
Page 3 Only Peripherals complying with the FCC Class B limits may be attached to this equipment. Operation with noncompliant peripherals or peripherals not recommended by Toshiba is likely to result in interference to radio and TV reception. Shielded cables must be used between the external devices and ®...
Page 4: Industry Canada Requirement
Contact either: ❖ Toshiba’s Support Web site at pcsupport.toshiba.com. ❖ Or call the Toshiba Global Support Centre: Within the United States at (800) 457-7777 Outside the United States at (949) 859-4273 Industry Canada Requirement This Class B digital apparatus complies with Canadian ICES-003.
Page 5: Telephone Company Procedures
If trouble is experienced with this equipment, for repair or limited warranty information, please contact Toshiba Corporation, Toshiba America Information Systems, Inc. or an authorized representative of Toshiba, or the Toshiba Support Centre within the United States at (800) 457-7777 or Outside the United States at (949) 859-4273.
Page 6 provided may not be a 900 number or any other number for which charges exceed local or long-distance transmission charges.) In order to program this information into your fax transmission, refer to the fax software instructions installed on this computer. Alarm Equipment If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm...
Page 7: Wireless Interoperability
USOC RJ11C. Wireless Interoperability The TOSHIBA Wireless LAN Mini PCI Card products are designed to be interoperable with any wireless LAN product that is based on Direct Sequence Spread Spectrum (DSSS) radio technology, and is compliant to: ❖...
Page 8: Wireless Lan And Your Health
The radiated output power of the TOSHIBA Wireless LAN Mini PCI Card is far below the FCC radio frequency exposure limits. Nevertheless, the TOSHIBA Wireless LAN Mini PCI Card shall be used in such a manner that the potential for human contact during normal operation is minimized. In normal operating configuration, the LCD in the upright position, the distance between the antenna and the user should not be less than 20 cm.
Page 9 documentation that comes with the product. This device complies with the following radio frequency and safety standards. Canada – Industry Canada (IC) This device complies with RSS 210 of Industry Canada. The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF field in excess of Health Canada limits for the general population;...
Page 10 EU Declaration of Conformity TOSHIBA declares that this product conforms to the following Standards: Supplementary *The product complies with the Information: requirements of the Low Voltage Directive 72/23/EEC, the EMC Directive 89/336/ EEC and/or the R&TTE Directive 1999/ 05/EEC. This product is carrying the CE-Mark in accordance with the related European Directives.
Page 11 2. If this equipment causes RF interference to other radio stations, promptly change the frequency being used, change the location of use, or turn off the source of emissions. 3. Contact TOSHIBA Direct PC if you have problems with interference caused by this product to Other Radio Stations.
Page 12: Device Authorization
This equipment uses a frequency bandwidth from 2,400 MHz to 2,483.5 MHz. It is possible to avoid the band of mobile object identification systems. 3. TOSHIBA Direct PC Monday – Friday: 10:00 – 17:00 Toll Free Tel: 0120-15-1048 Direct Dial: 03-3457-4850...
Page 13: Radio Approvals For Wireless Devices
The following restrictions apply: ❖ Do not disassemble or modify the device. ❖ Do not install the embedded wireless module into other device. ❖ 5.17 GHz to 5.23 GHz for indoor use only. Radio Approvals for Wireless Devices NOTE The following information is dependent on what type of wireless device is in your computer.
Page 14 Europe - Restrictions for use of 2.4 GHz Frequencies in European Community Countries België/ For private usage outside buildings across public grounds over less than Belgique: 300m no special registration with IBPT/BIPT is required. Registration to IBPT/BIPT is required for private usage outside buildings across public grounds over more than 300m.
Page 15 802.11a (5 GHz) Australia Austria Belgium Canada Denmark Finland France Germany Greece Ireland Italy Liechtenstein Luxembourg Netherlands New Zealand Norway Portugal Sweden Switzerland Turbo Mode (5 GHz) Canada Europe - Restrictions for Use of 5 GHz Frequencies in European Community Countries European Community 5150-5250 MHz 5250-5350 MHz...
Page 16 ❖ This device must not be operated in ad-hoc mode using channels in the 5 GHz bands in the European Community. Ad-hoc mode provides a direct communication between two client devices without a Wireless LAN Access Point. ❖ This device must be used with Access Points that have employed and activated a radar detection feature required for European Community operation in the 5 GHz bands.
Page 17 802.11a (5 GHz) Australia Austria Belgium Canada Denmark Finland France Germany Greece Ireland Italy Liechtenstein Luxembourg Netherlands New Zealand Norway Portugal Sweden Switzerland Turbo Mode (5 GHz) Canada ® Approved Countries/Regions for use for the Intel PRO/ Wireless LAN 2100 3B Mini PCI Adapter This equipment is approved to the radio standard by the countries/regions in the following table.
Page 18: Bluetooth Wireless Technology Interoperability
Bluetooth Wireless Technology Interoperability ® Bluetooth Cards from TOSHIBA are designed to be interoperable with any product with Bluetooth wireless technology that is based on Frequency Hopping Spread Spectrum (FHSS) radio technology, and is compliant to: ❖ Bluetooth Specification as defined and approved by The Bluetooth Special Interest Group.
Page 19: Bluetooth Wireless Technology And Your Health
Always use Bluetooth cards from TOSHIBA in order to enable wireless networks over two or more (up to a total of seven) TOSHIBA portable computers using these cards. Please contact TOSHIBA computer product support on Web site http://www.toshiba-europe.com/computers/tnt/ bluetooth.htm in Europe or pcsupport.toshiba.com in the United States for...
Page 20: Regulatory Statements
The radiated output power of the Bluetooth Card from TOSHIBA is far below the FCC radio frequency exposure limits. Nevertheless, the Bluetooth Card from TOSHIBA shall be used in such a manner that the potential for human contact during normal operation is minimized.
Page 21 2. If this equipment causes RF interference to other radio stations, promptly change the frequency being used, change the location of use, or turn off the source of emissions. 3. Contact TOSHIBA Direct PC if you have problems with interference caused by this product to Other Radio Stations.
Page 22 This equipment uses a frequency bandwidth from 2,400 MHz to 2,483.5 MHz. It is impossible to avoid the band of mobile object identification systems. 3. TOSHIBA Direct PC Monday – Friday: 10:00 – 17:00 Toll Free Tel: 0120-15-1048 Direct Dial: 03-3457-4850...
Page 23 CD-RW drive, Multi-drive or any other optical drive. You could damage the drive. You would also be exposed to laser light or other safety hazards, resulting in serious injury. Always contact an authorized Toshiba service provider, if any repair or adjustment is required.
Page 24 Copyright This guide is copyrighted by Toshiba America Information Systems, Inc. with all rights reserved. Under the copyright laws, this guide cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed, however, with respect to the use of the information contained herein.
Page 25 Systems Incorporated in the United States and/or other countries. Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Toshiba is under license. Other trademarks and trade names are those of their respective owners.
Page 26: Table Of Contents
Keeping yourself comfortable ......40 Precautions............40 Important information on your computer’s cooling fan ..........42 Setting up your computer ........43 Setting up your software........43 Registering your computer with Toshiba ....45 Adding optional external devices......45 Connecting to a power source ........46 Charging the main battery........49...
Page 27 Contents Using the computer for the first time ......50 Opening the display panel .........50 Your computer’s features and specifications ..51 Turning on the power........51 Adding memory (optional) ........52 Installing a memory module ......53 Removing a memory module......58 Checking total memory ........60 Using the TouchPad™..........61 Scrolling with the TouchPad™...
Page 28 Inserting a compact disc........97 Playing an audio CD..........99 Playing a CD/DVD ...........100 Creating a CD/DVD..........101 Removing a disc with the computer on...102 Removing a disc with the computer off ..102 Caring for CD or DVD discs ......103 Toshiba’s online resources ........103...
Page 29 Contents Chapter 3: Mobile Computing..........104 Toshiba’s energy-saver design......104 Running the computer on battery power ....104 Battery Notice ..........105 Power management ........106 Using additional batteries .......106 Charging batteries..........107 Charging the main battery.......107 Charging the RTC battery........108 Monitoring main battery power......109 Determining remaining battery power.....111 What to do when the main battery runs low ...112...
Page 30 Using external speakers or headphones..139 Using PC Cards.............140 Inserting a PC Card .........140 Removing a PC Card ........141 Setting up a PC Card for your computer ..142 Chapter 5: Toshiba Utilities............143 TOSHIBA Assist ............144 Connect............145 Secure.............146 Protect & Fix ...........147 Optimize............148...
Page 31 Mouse Utility............163 Toshiba Hardware Setup........164 TOSHIBA Zooming Utility........166 CD/DVD Drive Acoustic Silencer ......168 TOSHIBA Accessibility ..........169 TOSHIBA Touch and Launch Utility.......170 TOSHIBA Touch and Launch Settings.....172 Disabling or enabling TOSHIBA Touch and Launch ..........173 Chapter 6: If Something Goes Wrong ........174 Problems that are easy to fix ........174...
Page 32 DVD operating problems........204 Develop good computing habits ......207 Data and system configuration backup in Windows XP ..........208 If you need further assistance.......214 Before you contact Toshiba ......214 Contacting Toshiba .........215 Other Toshiba Internet Web sites......216 Toshiba’s worldwide offices........216 Appendix A: Hot Keys..............218 Volume Mute ............218...
Page 33 Contents Appendix B: Power Cord/Cable Connectors......226 Appendix C: Using ConfigFree™ with your Toshiba Computer ............227 Getting Started............228 Starting ConfigFree .........228 ConfigFree Utilities..........230 Connectivity Doctor ........230 Search for Wireless Devices ......233 Profile Settings ..........236 ConfigFree SUMMIT........238 Quick Connect..........242 Using the Automatic Switch........246 Semi-Automatic Switch Feature ......247...
Page 34: Introduction
2002/95/EC, Restriction of the use of certain Hazardous Substances in electrical and electronic equipment (RoHS), which restricts use of lead, cadmium, mercury, hexavalent chromium, PBB, and PBDE. Toshiba requires its notebook component suppliers to meet RoHS requirements and verifies its suppliers’ commitment to meeting RoHS requirements by conducting component sampling inspections during the product design approval process.
Page 35: This Guide
Toshiba’ s Web site at pcsupport.toshiba.com. While Toshiba has made every effort at the time of publication to ensure the accuracy of the information provided herein, product specifications, configurations, prices, system/component/ options availability are all subject to change without notice.
Page 36: Safety Icons
Introduction Safety icons Safety icons This manual contains safety instructions that must be observed to avoid potential hazards that could result in personal injuries, damage to your equipment, or loss of data. These safety cautions have been classified according to the seriousness of the risk, and icons highlight these instructions as follows: Indicates an imminently hazardous situation which, if not...
Page 37: Other Icons Used
Your computer comes with the following documentation: ❖ An electronic version of the user’s guide (this document) ❖ It may also contain guides for other programs that may come with your system. For accessory information, visit Toshiba’s Web site at accessories.toshiba.com.
Page 38: Service Options
To stay current on the most recent software and hardware options for your computer, and for other product information, be sure to regularly check the Toshiba Web site at pcsupport.toshiba.com. If you have a problem or need to contact Toshiba, see “If Something Goes Wrong” on page 174.
Page 39: Chapter 1: Getting Started
Chapter 1 Getting Started This chapter provides tips for working comfortably, summarizes how to connect components, and explains what to do the first time you use your notebook computer. Selecting a place to work Your computer is portable and designed to be used in a variety of circumstances and locations.
Page 40: Keeping Yourself Comfortable
Extreme heat, cold, or humidity. ❖ Liquids and corrosive chemicals. Keeping yourself comfortable The Toshiba Instruction Manual for Safety and Comfort, that shipped with your computer, contains helpful information for setting up your work environment and tips for working comfortably throughout the day.
Page 41 Getting Started Selecting a place to work Computer base and palm rest can become hot! Avoid prolonged contact to prevent heat injury to skin. Read the enclosed Instruction Manual for Safety and Comfort. Never place a heavy object on the computer and be careful not to drop a heavy object onto the computer.
Page 42: Important Information On Your Computer's Cooling Fan
Getting Started Selecting a place to work Important information on your computer’s cooling fan Your computer may have a CPU cooling fan that cools the CPU by drawing outside air into the computer. The cooling fan may be located on the bottom of the computer. Always make sure your computer and AC adaptor have adequate ventilation and are protected from overheating when the power is turned on or when an AC adaptor is connected to...
Page 43: Setting Up Your Computer
Getting Started Setting up your computer Setting up your computer TECHNICAL NOTE: You must complete all setup steps up to and including “Setting up your software” on page 43 before adding external or internal components to your computer. These components include, but are not limited to, a mouse, keyboard, printer, memory, and PC Cards.
Page 44 Getting Started Setting up your computer The first time you turn on your computer, the Setup Wizard guides you through steps to set up your software. From the Welcome screen click Next to enter the Setup Wizard. Confirm acceptance of Microsoft’s End User License Agreement and click Next.
Page 45: Registering Your Computer With Toshiba
Registering your computer with Toshiba Registering your computer with Toshiba Product registration is strongly recommended, and allows Toshiba to send you periodic updates, announcements, and special offers applicable to your product. Product registration can be completed during the initial start up process of your computer.
Page 46: Connecting To A Power Source
TOSHIBA Battery Charger (that may have been provided with your computer), or use AC adaptors and battery chargers specified by TOSHIBA to avoid any risk of fire or other damage to the computer. Use of an incompatible AC adaptor or Battery Charger could cause fire or damage to the computer possibly resulting in serious injury.
Page 47 Getting Started Connecting to a power source Power cord/cable AC adaptor AC adaptor cord (Sample Illustration) Power cord/cable and AC adaptor To connect AC power to the computer: Connect the power cord/cable to the AC adaptor. (Sample Illustration) Connecting the power cord/cable to the AC adaptor Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause birth defects...
Page 48 Getting Started Connecting to a power source Plug the AC adaptor cord into the DC-IN on the back of the computer. (Sample Illustration) Connecting the AC adaptor cord to the computer Connect the power cord/cable to a live electrical outlet. The AC power and battery lights on the indicator panel glow green.
Page 49: Charging The Main Battery
Getting Started Charging the main battery NOTE If the AC power light flashes amber during charging, either the main battery is malfunctioning, or it is not receiving correct input from the AC power supply. Disconnect the AC power cord/cable and remove the main battery pack.
Page 50: Using The Computer For The First Time
Getting Started Using the computer for the first time Using the computer for the first time The computer is now ready for you to turn it on and begin using it. Opening the display panel Slide the display latch to the right. Lift the display panel.
Page 51: Your Computer's Features And Specifications
Getting Started Using the computer for the first time Your computer’s features and specifications Certain notebook chassis are designed to accommodate all possible configurations for an entire product Series. Your select model may not have all the features and specifications corresponding to all of the icons or switches shown on the notebook chassis, unless you have selected all those features.
Page 52: Adding Memory (Optional)
You may want to increase the computer’s memory if you use complex software or process large amounts of data. NOTE Before adding external devices or memory, Toshiba recommends setting up your software. See “Setting up your software” on page...
Page 53: Installing A Memory Module
Getting Started Adding memory (optional) Installing a memory module Additional memory modules can be installed in the memory module slots on the base of the computer. You will need a small Phillips screwdriver for this procedure. If you use the computer for a long time, the memory module will become hot.
Page 54 Getting Started Adding memory (optional) Remove the main battery. For information on removing the main battery, see “Removing the battery from the computer” on page 116. Close the display panel and turn the computer upside down to locate the memory module slot cover. Memory module slot cover Front of computer (Sample Illustration) Locating the memory module slot cover...
Page 55 Getting Started Adding memory (optional) Remove the memory module slot cover. Place the screw and cover in a safe place so that you can retrieve them later. Static electricity can damage the memory module. Before you handle the module, touch a grounded metal surface to discharge any static electricity you may have built up.
Page 56 Getting Started Adding memory (optional) Pick up the memory module by its sides, avoiding any contact with its connector. Position the module toward the socket, aligning the connector’s notch with the matching key in the socket. notch latch connector latch (Sample Illustration) Aligning the memory module with the socket Firmly press the memory module into the memory slot’s socket at approximately a 30-degree angle (to the...
Page 57 Getting Started Adding memory (optional) Once the module’s connector is fully inserted into the socket, press downward on the top edge of the module to seat the module into the latches at the sides of the socket. These latches should “snap” into place securely with the corresponding cutouts in the side of the module.
Page 58: Removing A Memory Module
Getting Started Adding memory (optional) Re-insert the main battery. For more information on inserting the main battery, see “Inserting a charged battery” on page 118. Turn the computer right side up. Reconnect the cables. Restart the computer. TECHNICAL NOTE: You must have at least one memory module installed for the computer to work.
Page 59 Getting Started Adding memory (optional) Do not try to remove a memory module with the computer turned on. You can damage the computer and the memory module. Do not remove the memory module while the computer is in Standby or Hibernation mode. The computer could hang up the next time you turn it on and data in memory will be lost.
Page 60: Checking Total Memory
Getting Started Adding memory (optional) Gently lift the memory module to a 30-degree angle and slide it out of the slot. Memory slots Front of computer (Sample Illustration) Removing the memory module Replace the memory module slot cover and secure it using the screw.
Page 61: Using The Touchpad
Getting Started Using the TouchPad™ The General tab view automatically appears and shows total memory. If the computer does not recognize the memory configuration, turn off the computer, remove the memory slot cover, and check that the module is inserted completely into the socket and lined up squarely with the socket latches.
Page 62: Scrolling With The Touchpad
Getting Started Using the TouchPad™ ™ Scrolling with the TouchPad ™ There are two active regions on the TouchPad that allow you to scroll as you would with any wheel device on a mouse or trackball. To scroll vertically, run your finger up or down along the right edge of the TouchPad.
Page 63 Getting Started Using the TouchPad™ Click the Device Settings tab. The Device Settings tab view window appears. (Sample Image) Device Settings tab screen Select Disable or Enable, whichever is appropriate. Click Apply. Click OK. The Mouse Properties window closes. Close the Printers and Other Hardware window. Close the Control Panel window.
Page 64: Using External Display Devices
Getting Started Using external display devices Using external display devices Your computer comes with a built-in LCD display, but you can also connect an external display device to the available video port: ❖ An external monitor or projector via the RGB (monitor) port ❖...
Page 65: Directing The Display Output When You Turn On The Computer
Getting Started Using external display devices Directing the display output when you turn on the computer Once you have connected an external display device, you can choose to use the internal display only, the external device only, or both simultaneously. The quickest way to change the display output settings is to use the display hot key ( Press simultaneously.
Page 66: Adjusting The Quality Of The External Display
Getting Started Using an external keyboard TECHNICAL NOTE: You can also change these settings using the Display Properties box. Set the option for the video controller by clicking Start, Control Panel, Appearance and Themes, and then Display. Choose the Settings tab, click the Advanced button, select Display Device, select the applicable Monitor type, and then click Apply or OK.
Page 67: Using A Mouse
Getting Started Using a mouse Using a mouse You may want to use a mouse instead of the computer’s built- in TouchPad. You can use a USB-compatible mouse. After logging on to your system, the mouse cursor may move NOTE to the upper-right side of the screen.
Page 68: Setting Up A Printer
Getting Started Connecting a printer If your printer does not support Plug and Play, you can set up the printer as described in “Setting up a printer” on page To connect a printer to your computer: Connect the printer cable to the printer and then connect the other end to one of the computer’s USB ports.
Page 69: Connecting An Optional External Diskette Drive
Getting Started Connecting an optional external diskette drive Connecting an optional external diskette drive Some operations, such as creating a password service diskette, require a diskette drive designed for use with 3.5- inch diskettes. (Sample Illustration) Optional external USB diskette drive To connect an optional external USB diskette drive, connect the cable to one of the computer’s USB ports.
Page 70: Turning Off The Computer
Getting Started Turning off the computer Turning off the computer Pressing the power button before shutting down the ® Windows operating system could cause you to lose your work. Make sure the system indicator panel’s disk light and the drive-in-use light are off. If you turn off the power while a disk is being accessed, you may lose data or damage the disk and/or drive.
Page 71: Hibernation Mode
Getting Started Turning off the computer ❖ If you have work in progress and are not connected to a ® network, use the Windows Standby or Hibernate commands to save your system settings so that, when you turn on the computer again, you will automatically return to where you left off.
Page 72 Getting Started Turning off the computer For information on how to use and configure Hibernation mode see “Using and configuring Hibernation mode” on page Standby mode The Standby command places the computer into a power- saving mode. Standby holds the current state of the computer in system memory (RAM) so that, when you restart the computer, you can continue working from where you left off.
Page 73: Using The Turn Off Computer Or Shut Down Commands
Getting Started Turning off the computer Using the Turn Off Computer or Shut Down commands Depending on the operating system installed, use the following steps to turn off your computer. Turn Off ® ® For Windows XP Home, or either Windows ®...
Page 74 Toshiba’s Power Saver utility. Click Start, Control Panel, and then Performance and Maintenance. Click the TOSHIBA Power Saver icon. Click on the Setup Action tab. (Sample Image) Setup action settings screen Select the options you want from the drop-down lists.
Page 75: Using And Configuring Hibernation Mode
Click Apply. Click OK. For more information about the Power Saver utility, see NOTE “TOSHIBA Power Saver” on page 161. Once the computer is configured, you can turn it off by either pressing the power button or closing the display panel, depending on the options set.
Page 76 To use any of these methods, you first need to enable them in Toshiba’s Power Saver utility. Click Start, Control Panel, and then Performance and Maintenance. Click the TOSHIBA Power Saver icon. Click the Setup Action tab. Select Hibernation for the options you want. ❖...
Page 77: Using And Configuring Standby Mode
Getting Started Turning off the computer Starting again from Hibernation mode To start up the computer from Hibernation mode, press the power button until the power button and the on/off light glow green. The computer returns to the screen(s) you were using. If you put the computer in Hibernation mode by closing the display panel, you can start it again by opening the display panel.
Page 78 To use any of these methods, you first need to enable them in Toshiba’s Power Saver utility. Click Start, Control Panel, and then Performance and Maintenance. Click the TOSHIBA Power Saver icon. Click the Setup Action tab. Select Standby for the options you want. ❖...
Page 79: Closing The Display Panel
Getting Started Caring for your computer Closing the display panel After you have turned off the computer, close the display panel to keep dust and dirt out of the computer. Caring for your computer This section gives tips on cleaning and moving your computer.
Page 80: Using A Computer Lock
You may want to secure your computer to a heavy object such as your desk. The easiest way to do this is to purchase an optional computer lock cable. For more information on purchasing a cable lock, visit accessories.toshiba.com. (Sample Illustration) Computer lock cable To secure the computer: Wrap the cable through or around some part of a heavy object.
Page 81: Chapter 2: Learning The Basics
Chapter 2 Learning the Basics This chapter gives some computing tips and provides important information about basic features. Computing tips ❖ Save your work frequently. Your work stays in the computer’s temporary memory until you save it to the disk. If the network you are using goes down and you must restart your computer to reconnect, or your battery runs out of charge while you are working, you will lose all work since you last saved.
Page 82 Learning the Basics Computing tips ❖ Back up your files to disks (or other removable media) on a regular basis. Label the backup copies clearly and store them in a safe place. It is easy to put off backing up because it takes time. However, if your hard disk suddenly fails, you will lose all the data on it unless you have a separate backup copy.
Page 83: Using The Keyboard
Learning the Basics Using the keyboard Using the keyboard Your computer’s keyboard contains character keys, control ® keys, function keys, and special Windows keys, providing all the functionality of a full-size keyboard. (Sample Illustration) Keyboard Character keys Typing with the character keys is very much like typing on a typewriter, except that: ❖...
Page 84: Ctrl, Fn, And Alt Keys
Learning the Basics Using the keyboard Your computer’s keyboard has only one and one key. Enter Ctrl Most of the time, this does not matter. However, some programs assign separate functions to the right and left Ctrl keys, or to the regular and numeric pad keys on Enter the full-sized keyboard.
Page 85: Windows Special Keys
Learning the Basics Using the keyboard Windows special keys Windows key Application key (Sample Illustration) Windows special keys Your computer’s keyboard has two keys that have special functions in Windows: ❖ Windows key—Opens the Start menu ❖ Application key—Has a similar function as the secondary mouse button Overlay keys The keys with gray numbers and symbols on the front of...
Page 86: Using The Overlay To Type Numeric Data
Learning the Basics Starting a program Using the overlay to type numeric data The keys with the numbers on their right front are the numeric overlay keys. To turn the numeric overlay on, press simultaneously. The numeric mode light on the keyboard indicator panel glows when the numeric overlay is on.
Page 87: Starting A Program From The Start Menu
Learning the Basics Starting a program The next three sections explain how to start a program from the Start menu, Explorer and the Run dialog box. Starting a program from the Start menu When you install a program, the operating system usually puts an icon in the All Programs menu.
Page 88: Starting A Program From The Run Dialog Box
Learning the Basics Starting a program Click Windows Explorer. Click My Computer to expand the window. In the left part of the window, click the line that ends in “(C:).” In the left part of the window, under the C: icon, double- click the folder containing the program, in this case Program Files.
Page 89: Saving Your Work
Learning the Basics Saving your work In the Run dialog box: ❖ If you know the program’s location, type the ® command line. For a program in the Windows folder, type just the program name. Otherwise, type the full file path. For example, to access WordPad, type: c:\Program Files\Windows NT\Accessories\wordpad.exe, then click OK.
Page 90: Saving Files
Learning the Basics Saving your work Saving files ® In your Windows application, click File, and then Save. If you are working with a document that already has a file name, this is all you need to do. If you created a new document, your program displays a Save As dialog box.
Page 91: Printing Your Work
Learning the Basics Printing your work You may use all the letters and numbers on the keyboard plus these characters: _ ^ $ ~ ! # % & { } ( ) @ and '. File names are not case-sensitive. Using a file extension Most programs assign an extension to the file name that identifies the file as being created in the program with a...
Page 92: Backing Up Your Work
Learning the Basics Backing up your work ® In your Windows application, click File, and then Print. The program displays a Print dialog box. (Sample Image) Print dialog box Specify the print parameters. For example, the range of pages and number of copies to print. Click Print.
Page 93: Restoring Your Work
Learning the Basics Using the optical drive Small files can be backed up on diskettes if an optional external diskette drive is available. Restoring your work To restore information from your backup media to your hard disk, use the Restore page in the backup program. Look in the online Help or your operating system documentation for information on restoring files.
Page 94: Optical Drive Components
Learning the Basics Using the optical drive NOTE For optimum DVD performance, it is recommended that you play DVDs while running the computer on AC power. Optical drive components The optical drive is located on the right side of the computer. Your optical drive may look like this: Drive in-use indicator light Eject button...
Page 95: Media Control Buttons
Learning the Basics Using the optical drive Media control buttons (Available on certain models) The media control buttons (available on certain models) located to the left of the keyboard let you access the Internet when the computer is on or off, and play audio CDs or DVD movies when the computer is off.
Page 96 Learning the Basics Using the optical drive Operating system is The system accesses the Internet running or the computer browser. is in Standby mode and you press the Internet browser button The CD/DVD button activates a media playing application that can play audio CDs or DVD movies when the computer is powered off.
Page 97: Inserting A Compact Disc
Learning the Basics Using the optical drive Inserting a compact disc To insert a compact disc into the drive: Make sure the computer is turned on. The drive will not open if the computer’s power is off. Make sure the drive’s in-use indicator light is off. Press the drive’s eject button.
Page 98 If you insert the disc incorrectly, it may jam the drive. If this happens, contact Toshiba support for assistance. Push the disc tray in by pressing gently on the center of the tray until it clicks into place.
Page 99: Playing An Audio Cd
Learning the Basics Using the optical drive Playing an audio CD Insert an audio CD and close the disc tray. ® If the computer is turned on, Windows Media Player opens and the CD begins to play. You can use the Windows Media Player program to control the CD.
Page 100: Playing A Cd/Dvd
Learning the Basics Using the optical drive The Windows Media Player control panel works much like an ordinary compact disc player: ❖ To play the CD or to pause, click the Play/Pause button. ❖ To stop the CD, click the Stop button. Before putting on headphones to listen to an audio CD, turn the volume dial down.
Page 101: Creating A Cd/Dvd
These problems are not due to any defect in your Toshiba computer or optical drive. Please refer to your computer's product specification for listing of specific format compatibilities.
Page 102: Removing A Disc With The Computer On
Learning the Basics Using the optical drive Removing a disc with the computer on To remove a disc (CD or DVD) with the computer turned on: Press the eject button on the drive. Do not press the eject button while the in-use indicator light is glowing.
Page 103: Caring For Cd Or Dvd Discs
Let the disc dry completely before inserting it in the drive. Toshiba’s online resources Toshiba maintains a number of online sites to which you can connect. These sites provide information about Toshiba products, give help with technical questions and keep you up to date with future upgrades.
Page 104: Chapter 3: Mobile Computing
Many of these energy-saving features have been set by Toshiba. We recommend you leave these features active, allowing your computer to operate at its maximum energy efficiency, so that you can use it for longer periods while traveling.
Page 105: Battery Notice
Published battery life numbers are achieved on select models and configurations tested by Toshiba at the time of publication. Recharge time varies depending on usage. Battery may not charge while the computer is consuming full power.
Page 106: Power Management
Users who are not completely familiar with the power management component of the system should use the preset configuration. For assistance with setup changes, contact Toshiba’s Global Support Centre. Using additional batteries In addition to the main battery, you may also have an optional second battery (not included with your computer).
Page 107: Charging Batteries
Never leave batteries in the battery charger for more than a week at a time. Doing so may reduce the potential charge of the battery. Always use the battery charger specified by Toshiba. You can order a Toshiba battery charger from Toshiba’s Web site at accessories.toshiba.com.
Page 108: Charging The Rtc Battery
Mobile Computing Charging batteries The battery may not start charging immediately under the following conditions: ❖ The battery is extremely hot or cold. To ensure that the battery charges to its full capacity, wait until it reaches room temperature (50 to 80 degrees Fahrenheit, 10 to 26 degrees Celsius).
Page 109: Monitoring Main Battery Power
Mobile Computing Monitoring main battery power If the RTC battery is low, the real-time clock and calendar may display the incorrect time and date, or stop working. To recharge the RTC battery, plug the computer into a live electrical outlet and leave the computer powered on for 24 hours.
Page 110 Mobile Computing Monitoring main battery power If the AC power light flashes amber during charging, either the NOTE battery pack is malfunctioning, or it is not receiving correct input from the AC power supply. Disconnect the AC power cord/cable and remove the battery pack.
Page 111: Determining Remaining Battery Power
Click Start, Control Panel, Performance and Maintenance, and then TOSHIBA Power Saver. Click the TOSHIBA Power Saver icon. The Power Saver Properties window appears. The remaining battery charge is indicated on the left side of the dialog box.
Page 112: What To Do When The Main Battery Runs Low
Standby mode or Hibernation mode or to completely power down when the alarm goes off. To change the default alarm settings: Click Start, Control Panel, Performance and Maintenance, and then TOSHIBA Power Saver. Click the Setup Action tab. Configure the Alarm settings to suit your needs.
Page 113: Conserving Battery Power
Toshiba has combined these options into preset Power Profiles. Using one of these profiles lets you choose between maximum power savings and peak system performance. You may also set individual power-saving options to suit your own needs.
Page 114: Power Profiles
To do this: Click Start, Control Panel, Performance and Maintenance, and then TOSHIBA Power Saver. The TOSHIBA Power Saver Properties window appears. (Sample Image) TOSHIBA Power Saver Properties window Select an appropriate profile for your work environment or create your own custom profile.
Page 115: Using A Hot Key To Set The Power Profile
The Power Profile options are: Full Power, High Power, Normal, DVD Playback, Presentation, and Long Life. Release the key. The pop-up window disappears. You are now in the selected mode. For more information on setting the battery Power Profile, “TOSHIBA Power Saver” on page 161.
Page 116: Changing The Main Battery
Mobile Computing Changing the main battery Changing the main battery When your main battery has run out of power, you have two options: plug in the AC adaptor or install a charged main battery. Never short circuit the battery pack by either accidentally or intentionally bringing the battery terminals in contact with another conductive object.
Page 117 Mobile Computing Changing the main battery Slide the battery release lock to the unlocked position. (Sample Illustration) Unlocking the battery release lock Slide the battery release latch to release the battery. Pull the discharged battery out of the computer. (Sample Illustration) Removing the battery...
Page 118: Inserting A Charged Battery
Mobile Computing Changing the main battery If the battery is leaking or its case is cracked, put on protective gloves to handle it, and discard it immediately. Always dispose of used battery packs in compliance with all applicable laws and regulations. Put insulating tape, such as cellophane tape, on the electrode during transportation to avoid a possible short circuit, fire or electric shock.
Page 119: Taking Care Of Your Battery
Mobile Computing Taking care of your battery Slide the battery lock to the locked position. (Sample Illustration) Locking the battery release lock Turn the computer right side up. Reconnect any cables that were removed in step 3 of “Removing the battery from the computer” on page 116.
Page 120: Maintaining Your Battery
If a battery is leaking or damaged, replace it immediately. Use protective gloves when handling a damaged battery. ❖ To replace the main battery, use an identical battery that you can purchase through the Toshiba Web site at accessories.toshiba.com. ❖ A reverse polarity condition should be avoided with all batteries.
Page 121 Mobile Computing Taking care of your battery Operate the computer on battery power for five minutes. If the battery pack has at least five minutes of operating time, continue operating until the battery pack is fully discharged. If the battery light flashes or there is some other warning to indicate a low battery, go to step 4.
Page 122: Disposing Of Used Batteries
Please be kind to our shared environment. Check with your local government authority for details regarding where to recycle old batteries or how to dispose of them properly. If you cannot find the information you need elsewhere, call Toshiba at: (800) 457-7777.
Page 123: Traveling Tips
❖ Always travel with the computer in a carrying case. Toshiba offers a choice of carrying cases for the computer. They all provide plenty of extra space for manuals, power cords, and compact discs. Contact your authorized Toshiba representative for more information or visit Toshiba’s Web site at accessories.toshiba.com.
Page 124: Chapter 4: Exploring Your Computer's Features
Chapter 4 Exploring Your Computer’s Features In this chapter, you will explore some of the special features of your notebook computer. Exploring the desktop The desktop is the launching pad for everything you can do in ® the Windows operating system. You use its features to start programs, find documents, set up system components, and perform most other computing tasks.
Page 125: Finding Your Way Around The Desktop
Exploring Your Computer’s Features Exploring the desktop Finding your way around the desktop Your computer’s desktop includes several standard features: icons, Start button, Taskbar, System tray, and background pattern. Icons Start button Taskbar System tray ® (Sample Image) Windows operating system desktop Icons An icon represents a folder, file, or program that can be quickly activated by double-clicking the icon.
Page 126 Exploring Your Computer’s Features Exploring the desktop The icons initially displayed on your system desktop include: Recycle Bin — Holds files you have deleted. You may be able to retrieve these files until you empty the Recycle Bin. TECHNICAL NOTE: If you delete a file from a diskette or flash media, it does not go into the Recycle Bin.
Page 127: Setting Up For Communications
Exploring Your Computer’s Features Setting up for communications Taskbar Each time you open a program, a button associated with that program appears on the Taskbar. With some programs, a button appears on the Taskbar for each document or window you open. You can use these buttons to quickly switch between the programs or windows.
Page 128 Exploring Your Computer’s Features Setting up for communications Determining the COM port Your modem (available on certain models) is connected to one of the computer’s COM (communications) ports. The default setting for the modem is COM3. The following procedure is intended to support you if you need to either upgrade your modem or reset the port to the default settings.
Page 129: Connecting The Modem To A Telephone Line
Send a fax directly from your computer. For more detailed information regarding your computer’s modem, visit Toshiba’s Web site at accessories.toshiba.com. Before you can communicate using the modem, you need to connect it to a telephone line. Your computer’s built-in modem port provides an RJ-11 jack, allowing you to connect the modem to a standard voice-grade telephone line.
Page 130 Exploring Your Computer’s Features Setting up for communications Plug one end of a telephone cable (purchased separately) into the modem port on the right side of the computer. (Sample Illustration) Connecting the telephone cable to the modem port Connect the other end to the RJ-11 wall jack. (Sample Illustration) Connecting to a wall jack Connect the built-in modem only to ordinary analog phone lines.
Page 131: Connecting Your Computer To A Network
Exploring Your Computer’s Features Setting up for communications Connecting your computer to a network You can connect your computer to a network to increase its capabilities and functionality using one of its communication ports. Accessing a network To access a network: ❖...
Page 132 Exploring Your Computer’s Features Setting up for communications How to disable the Ethernet LAN port When your computer starts, Windows attempts to contact a Dynamic Host Configuration Protocol (DHCP) server. If the computer is not connected to a network, it may pause a few minutes as it waits for a reply.
Page 133: An Overview Of Using The Internet
Exploring Your Computer’s Features An overview of using the Internet Using Wireless LAN Connectivity Wireless connectivity and some features may require you to NOTE purchase additional software, external hardware or services. Availability of public wireless LAN access points may be limited.
Page 134: The Internet
Exploring Your Computer’s Features An overview of using the Internet ❖ Internet features ❖ Uploading to, and downloading files from, the Internet The Internet The Internet is an association of thousands of networks and millions of computers around the world connected by communications lines.
Page 135: Connecting To The Internet
Exploring Your Computer’s Features An overview of using the Internet Connecting to the Internet To connect to the Internet, you need: ❖ A modem (available on certain models) and telephone line, or a LAN connection ❖ A Web browser ❖ An Internet Service Provider (ISP) account ®...
Page 136: Internet Features
Exploring Your Computer’s Features An overview of using the Internet To visit a desired Web site, type in the Web address. The Web address, or Uniform Resource Locator (URL), is a unique identifier for that computer system linked to the Internet. Web addresses can also appear within a Web page’s text, and are known as links.
Page 137: Uploading To, And Downloading Files From, The Internet
Exploring Your Computer’s Features Exploring audio features Uploading to, and downloading files from, the Internet Transferring files from one computer to another is termed uploading (transferring data from your computer to a site on the Web), or downloading (transferring data from a site on the Web to your computer).
Page 138 Exploring Your Computer’s Features Exploring audio features Positioning Record Stop Play Skip forward Skip backward (Sample Image) Sound Recorder screen Click the Record button. Speak normally into the microphone. When you have finished recording, click the Stop button. The Sound Recorder window displays the new sound file as a waveform.
Page 139: Using External Speakers Or Headphones
Exploring Your Computer’s Features Exploring audio features Using external speakers or headphones Your computer is equipped with a full stereo sound system with internal speakers. Instead of using the internal speakers, you can connect headphones or a pair of external stereo speakers.
Page 140: Using Pc Cards
Exploring Your Computer’s Features Using PC Cards Using PC Cards TECHNICAL NOTE: For PCMCIA-compatible PC Cards, check the package to make sure they conform to the PCMCIA 2.1 standard (or later). Other cards may work with your computer, but are likely to be much more difficult to set up and use. Your notebook computer comes with a PC Card slot and supports two types of PC Cards that you can install: ❖...
Page 141: Removing A Pc Card
Exploring Your Computer’s Features Using PC Cards Removing a PC Card Be sure to disable the PC Card prior to removing it. Otherwise, the system may be damaged. Before removing a PC Card, make sure that no applications or NOTE system services are using the card.
Page 142: Setting Up A Pc Card For Your Computer
Exploring Your Computer’s Features Using PC Cards Setting up a PC Card for your computer Some PC Cards are ready to use as soon as you install them. Others, such as hard disk cards, network cards, and SCSI adapters, may need to be set up to work with your computer. To set up your PC Card, refer to the documentation that came with the card or refer to your operating system manual or online Help.
Page 143: Chapter 5: Toshiba Utilities
❖ PC Diagnostic Tool Utility ❖ Fn-esse® ❖ TOSHIBA Hotkey Utility ❖ TOSHIBA Power Saver ❖ Mouse Utility ❖ Toshiba Hardware Setup ❖ TOSHIBA Zooming Utility ❖ CD/DVD Drive Acoustic Silencer ❖ TOSHIBA Accessibility ❖ TOSHIBA Touch and Launch Utility...
Page 144: Toshiba Assist
TOSHIBA Assist The TOSHIBA Assist provides quick access to computer functions and allows you to customize a range of computer settings. To access TOSHIBA Assist, do one of the following: ❖ Double-click the TOSHIBA Assist shortcut icon on the desktop.
Page 145: Connect
Toshiba Utilities TOSHIBA Assist Connect The features available in this category are: ❖ ConfigFree™ Connectivity Doctor ❖ ConfigFree (Sample Image) TOSHIBA Assist window – Connect tab...
Page 146: Secure
Toshiba Utilities TOSHIBA Assist Secure The features available in this category are: ❖ User password ❖ Supervisor password (Sample Image) TOSHIBA Assist window – Secure tab...
Page 147: Protect & Fix
Toshiba Utilities TOSHIBA Assist Protect & Fix The feature available in this category is: ❖ PC Diagnostic Tool Utility (Sample Image) TOSHIBA Assist window – Protect & Fix tab...
Page 148: Optimize
TOSHIBA Hotkey Utility ❖ TOSHIBA Power Saver ❖ Mouse Utility ❖ Toshiba Hardware Setup ❖ TOSHIBA Zooming Utility ❖ CD/DVD Drive Acoustic Silencer ❖ TOSHIBA Accessibility ❖ TOSHIBA Touch and Launch Utility (Sample Image) TOSHIBA Assist window – Optimize tab...
Page 149: Setting Passwords
When you set a password, you must enter the password before you can work on your computer again. Toshiba supports several types of passwords on your computer: ❖ An instant password — Secures your open programs and files when leaving the computer temporarily.
Page 150: Using A User Password
A user password provides instant password and power-on password protection. Setting a user password To register a password for the power-on password functions: Click Start, All Programs, Toshiba, Utilities, and then TOSHIBA Assist. The TOSHIBA Assist window appears. On the left side, click the Secure tab.
Page 151 Enter the password again, then click OK. Click OK to exit. Deleting a user password To cancel the power-on password function: Click Start, All Programs, Toshiba, Utilities, and then TOSHIBA Assist. The TOSHIBA Assist window appears. On the left side, click the Secure tab.
Page 152: Using A Supervisor Password
A supervisor password prevents other users from changing hardware configuration options. Setting a supervisor password If you choose to set a supervisor or user password, Toshiba strongly recommends that you save your password in a location where you can later access it should you not remember it.
Page 153 Enter the password again, then click OK. Click OK to exit. Deleting a supervisor password To cancel the power-on password function: Click Start, All Programs, Toshiba, Utilities, and then TOSHIBA Assist. The TOSHIBA Assist window appears. On the left side, click the Secure tab.
Page 154: Pc Diagnostic Tool Utility
Refer to the online Help documentation within the application for additional help. To use the PC Diagnostic Tool utility: Click Start, All Programs, Toshiba, Utilities, and then PC Diagnostic Tool, or click the PC Diagnostic Tool icon in the Protect & Fix tab of TOSHIBA Assist.
Page 155: Fn-Esse
Toshiba Utilities Fn-esse® ® Fn-esse Desktop shortcuts and Toshiba’s Fn-esse program provide quick ways to open programs, documents, and folders from ® within any Windows program without using the Start menu. For more information on creating desktop shortcuts, refer to the operating system documentation that came with your computer.
Page 156: Starting Fn-Esse
Toshiba Utilities Fn-esse® ® Starting Fn-esse Click Start, All Programs, Toshiba, Utilities, and then Fn-esse, or click the Hotkey Assignment icon in the Optimize tab of TOSHIBA Assist. The Fn-esse keyboard appears. (Sample Image) Fn-esse screen The keys are color-coded as follows: ❖...
Page 157: Using Drag-And-Drop To Assign A Key
Toshiba Utilities Fn-esse® Using drag-and-drop to assign a key To assign a key to open a program or document: ® Start both Fn-esse and Windows Explorer (or the program supporting drag-and-drop). Resize the Explorer window so that you can see both the Fn-esse keyboard and Explorer at the same time.
Page 158 Toshiba Utilities Fn-esse® The Assignment Type dialog box appears. (Sample Image) Fn-esse assignment type dialog box Follow the instructions in “Making a direct key assignment” on page 158 “Making a popup assignment” on page 158. Making a direct key assignment Select Direct to display the Add/Edit Command dialog box.
Page 159: Viewing Existing Key Assignments
Toshiba Utilities Fn-esse® To create a popup list with items from various folders, or to pick only a few items from a folder, create a new folder containing only the desired programs and documents. If you are unsure how to do this, refer to your operating system documentation.
Page 160: Toshiba Hotkey Utility
Toshiba Utilities TOSHIBA Hotkey Utility TOSHIBA Hotkey Utility The TOSHIBA Hotkey utility allows you to receive a confirmation message when you use the Hotkey combination for Standby [ ] and Hibernation [ Fn+F3 Fn+F4 To activate the Hotkey utility: Click Start, All Programs, Toshiba, Utilities, and then Hotkey utility.
Page 161: Toshiba Power Saver
The TOSHIBA Power Saver Properties window appears. (Sample Image) TOSHIBA Power Saver Properties window The Profile panel on the left of the TOSHIBA Power Saver Properties window shows the power profiles used to control power usage for both AC power and battery power, as well as the estimated battery life for each power profile mode.
Page 162: Preset Power Profiles
Toshiba Utilities TOSHIBA Power Saver Preset Power Profiles The preset power profiles are: ❖ Full Power ❖ High Power ❖ Normal ❖ DVD Playback ❖ Presentation ❖ Long Life These profiles cannot be deleted. It is not recommended to change the settings of these profiles. If you need a custom profile, create a new profile with the properties you require.
Page 163: Mouse Utility
Toshiba Utilities Mouse Utility Mouse Utility The Mouse utility allows you to change your pointing device or mouse settings. To access the Mouse utility: Click Start, Control Panel, and then Mouse, or click the Mouse icon in the Optimize tab of TOSHIBA Assist.
Page 164: Toshiba Hardware Setup
To access Toshiba Hardware Setup: ❖ Click Start, All Programs, Toshiba, Utilities, Assist, or click the Toshiba Hardware Setup icon in the Optimize tab of TOSHIBA Assist. The Toshiba Hardware Setup screen appears. (Sample Image) Toshiba Hardware Setup screen – General tab...
Page 165 Toshiba Utilities Toshiba Hardware Setup ❖ Display—Allows you to change various default settings for the built-in LCD display When the computer restarts, it remembers the last NOTE configuration. If data does not appear on the display you are using after starting in Standby Mode, press Fn + F5. For more information, see “Directing the display output when you turn...
Page 166: Toshiba Zooming Utility
Toshiba Utilities TOSHIBA Zooming Utility Select the boot device icon by pressing the right or left arrow keys, then pressing the Enter key. Since the system is a quick-booting system, you must press NOTE the arrow keys immediately after pressing the power button.
Page 167 To zoom in, hold down the key and press ; to zoom out, hold down the key and press For more information about how to use the TOSHIBA Zooming utility, right click the icon in the Taskbar and then click Help.
Page 168: Cd/Dvd Drive Acoustic Silencer
Toshiba Utilities CD/DVD Drive Acoustic Silencer CD/DVD Drive Acoustic Silencer This utility can slow the speed of your optical drive to make it run more quietly. You can use this utility to make listening to music CDs more enjoyable. When you change the CD/DVD drive to “Quiet” mode, the NOTE setting is only valid for the current Windows session.
Page 169: Toshiba Accessibility
Toshiba Utilities TOSHIBA Accessibility TOSHIBA Accessibility The TOSHIBA Accessibility utility allows you to use the key to create a hot key combination with one of the function keys without pressing the two keys simultaneously as is usually required. Using Accessibility lets you make the a sticky key, meaning you can press it once, release it, and then press a function key to activate the hot key function.
Page 170: Toshiba Touch And Launch Utility
A blue circle within the TOSHIBA Touch and Launch window represents your finger location on the TouchPad. As you move the blue circle over an icon in the TOSHIBA Touch and Launch window, the icon is highlighted or selected. Release your finger from a selected icon to choose the icon’s...
Page 171 If the icon is highlighted in orange and selected, the function corresponding to the selected icon launches and the TOSHIBA Touch and Launch window closes. If the icon is highlighted in blue and selected, the function corresponding to the selected icon launches and the TOSHIBA Touch and Launch window remains open.
Page 172: Toshiba Touch And Launch Settings
TOSHIBA Touch and Launch is controlled/adjusted via an icon on the system tray. The icon will change color when the TOSHIBA Touch and Launch is active. Double-click the icon to open the TOSHIBA Touch and Launch Settings window. Right-click the icon to see the following shortcuts: ❖...
Page 173: Disabling Or Enabling Toshiba Touch And Launch
The Option button allows you to define how folders will open, define visual effects, and control when to show help. A list of tables appears in the Table section of the TOSHIBA Touch and Launch Settings window. These are the same items (icons) you can choose in the Corner Assignment section of the TOSHIBA Touch and Launch Settings.
Page 174: Chapter 6: If Something Goes Wrong
This chapter aims to help you solve many problems by yourself. It covers the problems you are most likely to encounter. If all else fails, contact Toshiba. You will find information on Toshiba’s support services at the end of this chapter. Problems that are easy to fix Your program stops responding.
Page 175 If Something Goes Wrong Problems that are easy to fix To close a program that has stopped responding: Press , and simultaneously (once). Ctrl The Windows Task Manager window appears. Click the Applications tab. If a program has stopped responding, the words “not responding”...
Page 176: Problems When You Turn On The Computer
If Something Goes Wrong Problems when you turn on the computer Your program performs an illegal operation. If you receive the message, “ Your program has performed an illegal close the window and continue working. If it operation ” happens again, record the details of the message and consult the software manufacturer.
Page 177 If Something Goes Wrong Problems when you turn on the computer If you are using an AC adaptor, verify that the computer is receiving power from the external power source by looking at the AC power light. If the indicator is glowing, the computer is connected to a live external power source.
Page 178: The Windows Operating System Is Not Working
If Something Goes Wrong The Windows® operating system is not working Always save your data even when you are using Standby. If your battery fully discharges, information that has not been saved will be lost. Your computer can be configured to warn you when the battery is running low see “What to do when the main battery runs low”...
Page 179: Using Startup Options To Fix Problems
If Something Goes Wrong The Windows® operating system is not working Unless a hardware device has failed, problems usually occur when you change the system in some way such as installing a new program or adding a device. If you experience any of these problems, use the options in the Startup menu to fix the problem.
Page 180: Internet Problems
If Something Goes Wrong The Windows® operating system is not working ® See your Windows documentation for further explanation. If your computer is connected to a network, the Startup menu NOTE may display different versions of Safe mode. Internet problems My Internet connection is very slow.
Page 181: Resolving A Hardware Conflict
Click a problem you would like help with from the listings and follow the on-screen instructions. You can connect to Support Online by clicking Support from the menu or by going to pcsupport.toshiba.com. Resolving a hardware conflict If you receive an error message telling you there is a device driver conflict or a general hardware problem, try using ®...
Page 182: Resolving Hardware Conflicts On Your Own
If Something Goes Wrong Resolving a hardware conflict The device most recently connected to the system is the one most likely to be causing a hardware conflict. Resolving hardware conflicts on your own Computer components need resources to accomplish a task. A device, such as a disk drive or a modem, needs a channel to the computer’s Central Processing Unit (CPU).
Page 183 If Something Goes Wrong Resolving a hardware conflict Plug and Play With Plug and Play and the operating system, avoiding hardware conflicts is easy. Plug and Play is a computer standard that helps the system BIOS (basic input/output system) and the operating system to automatically assign system resources to Plug and Play-compliant devices.
Page 184: Fixing A Problem With Device Manager
If Something Goes Wrong Resolving a hardware conflict Fixing a problem with Device Manager Device Manager provides a way to check and change the configuration of a device. Changing the default settings using Device Manager can cause other conflicts that make one or more devices unusable. Device Manager is a configuration tool for advanced users who understand configuration parameters and the ramifications of changing them.
Page 185 If Something Goes Wrong Resolving a hardware conflict To check a device’s properties: Click Start, Control Panel, then click Performance and Maintenance. Click the Administrative Tools icon. Double-click Computer Management, then click Device Manager. To view the device(s) installed, double-click the device type.
Page 186: Memory Problems
If Something Goes Wrong Resolving a hardware conflict Memory problems Incorrectly connected or faulty memory modules may cause errors that seem to be device-related. It is worthwhile checking for these first: Click Start, Turn off computer. Click Turn Off. The operating system shuts down and turns off the computer automatically.
Page 187 If Something Goes Wrong Resolving a hardware conflict Here are some typical problems and how to solve them: The AC power light does not come on when you plug in the AC adaptor and power cord/cable. Make sure the AC adaptor and power cord/cable are firmly plugged into both the wall outlet and the computer.
Page 188: Keyboard Problems
This is normal for all batteries. To purchase a new battery pack, see your accessories information that shipped with your computer, or visit the Toshiba Web site at accessories.toshiba.com. Refer to this site often to stay current on the most recent software and hardware options for your computer, and for other product information.
Page 189: Display Problems
If Something Goes Wrong Resolving a hardware conflict You have connected an external keyboard and the operating system displays one or more keyboard error messages. The keyboard you connected may be defective or incompatible with the computer. Try using a different make of keyboard.
Page 190 If Something Goes Wrong Resolving a hardware conflict If you are using an external monitor: ❖ Check that the monitor is turned on. ❖ Check that the monitor’s power cord/cable is firmly plugged into a working power outlet. ❖ Check that the cable connecting the external monitor to the computer is firmly attached.
Page 191 If Something Goes Wrong Resolving a hardware conflict A message displays saying that there is a problem with your display settings and that the adapter type is incorrect or the current settings do not work with your hardware. Reduce the size of the color palette to one that is supported by the computer’s internal display.
Page 192: Disk Drive Problems
If Something Goes Wrong Resolving a hardware conflict Disk drive problems Problems with the hard disk or with a diskette drive usually show up as an inability to access the disk or as sector errors. Sometimes a disk problem may cause one or more files to appear to have garbage in them.
Page 193 If Something Goes Wrong Resolving a hardware conflict Click Start. Error-checking tests and repairs the disk. Your hard disk seems very slow. If you have been using your computer for a long time, your files may have become fragmented. Run Disk Defragmenter. To do this, click Start, All Programs, Accessories, System Tools, and then Disk Defragmenter.
Page 194: Optical Drive Problems
If Something Goes Wrong Resolving a hardware conflict The computer displays the Non-system disk or disk error message. If you are starting the computer from a diskette, the diskette in the drive does not have the files necessary to start the computer.
Page 195: Sound System Problems
If Something Goes Wrong Resolving a hardware conflict If you need to remove a disc and cannot turn on the computer (for example, if the battery is completely discharged), use a narrow object, such as a straightened paper clip, to press the manual eject button.
Page 196: Pc Card Problems
If Something Goes Wrong Resolving a hardware conflict The computer emits a loud, high-pitched noise. This is feedback between the microphone and the speakers. It occurs in any sound system when input from a microphone is fed to the speakers and the speaker volume is too loud. Adjust the volume control.
Page 197 If Something Goes Wrong Resolving a hardware conflict If your system does not have built-in drivers for your PC Card and the card did not come with an operating system driver, it may not work under the operating system. Contact the manufacturer of the PC Card for information about using the card under the operating system.
Page 198 If Something Goes Wrong Resolving a hardware conflict The computer stops working (hangs) when you insert a PC Card. The problem may be caused by an I/O (input/output) conflict between the PCMCIA socket and another device in the system. Use Device Manager to make sure each device has its own I/O base address.
Page 199: Printer Problems
If Something Goes Wrong Resolving a hardware conflict A PC Card error occurs. Reinsert the card to make sure it is properly connected. If the card is attached to an external device, check that the connection is secure. Refer to the card’s documentation, which should contain a troubleshooting section.
Page 200: Modem Problems
Make sure the line has a dial tone. Connect a telephone handset to the line to check this. The other system may be busy or off line. Try making a test transmission to someone else. For more information regarding your system’s V.92 modem, visit the Toshiba Web site at pcsupport.toshiba.com.
Page 201: Wireless Networking Problems
To determine if your computer has an internal Wi-Fi adapter, NOTE check the device list in Device Manager (part of the Windows Control Panel). Some Toshiba models may have a Wi-Fi antenna switch even though they do not have an internal Wi-Fi adapter.
Page 202 If Something Goes Wrong Resolving a hardware conflict ❖ Check the Control Panel’s Device Manager to verify that ® the Wi-Fi adapter is recognized by Windows , and that the driver is loaded. Carefully note any error messages— these will be very helpful if you should confer with a support technician at a later time.
Page 203 If Something Goes Wrong Resolving a hardware conflict ❖ Use the PING command to verify a connection to the gateway at 192.168.1.1 (a default gateway for most wireless routers). ❖ Click Start, then click Run... ❖ Enter Cmd and press Enter. ❖...
Page 204: Dvd Operating Problems
If Something Goes Wrong DVD operating problems Select Allow me to connect to the selected wireless network, even though it is not secure. Windows XP will now try to establish a wireless connection. The Windows XP wireless management facility does not work.
Page 205 “Checking device properties” on page 184 instructions on using Device Manager to view the optical drive properties. Check the Toshiba Web site for new information on optical drives and their operation. A blank screen appears while watching a DVD-ROM movie or title.
Page 206 If Something Goes Wrong DVD operating problems Next to the words Desktop Area, move the slider to a lower setting, such as 800 x 600 or 640 x 480. Click OK. DVD titles, games, or applications appear distorted. Having Stretch enabled when your video resolution is set to 640 x 480 or 800 x 600 can cause distortion.
Page 207: Develop Good Computing Habits
If Something Goes Wrong Develop good computing habits Click None. Click OK. Develop good computing habits Save your work frequently. You can never predict when your computer will lock, forcing you to close a program and lose unsaved changes. Many software programs build in an automatic backup, but you should not rely solely on this feature.
Page 208: Data And System Configuration Backup In Windows Xp
If Something Goes Wrong Develop good computing habits Read the user’s guides. It is very difficult to provide a fail-safe set of steps you can follow every time you experience a problem with the computer. Your ability to solve problems will improve as you learn about how the computer and its software work together.
Page 209 If Something Goes Wrong Develop good computing habits Follow these steps to create a Restore Point using the System Restore utility: Click Start, and then Help and Support. Under Pick a Task, click Undo changes to your computer with System Restore. Click Create a restore point, and then click Next.
Page 210 CDs, a relatively high-capacity storage media. No additional software is required. Most of the CD and DVD drives built into recent Toshiba portable computer models can write to (or ‘burn’) as well as read from CDs.
Page 211 If Something Goes Wrong Develop good computing habits NOTE Documents and other data files that you create as you work are typically stored in the My Documents folder. You may also wish to back up other important data files stored elsewhere on your hard disk drive, for example: ❖...
Page 212 If Something Goes Wrong Develop good computing habits Favorites (bookmarks) for Internet Explorer Follow these steps to back up your Favorites for Internet Explorer (ver 5.0 or newer): In Internet Explorer, click File, Import and Export. The Import/Export Wizard will appear. Click Next. Click Export Favorites, Next.
Page 213 If Something Goes Wrong Develop good computing habits General tips for installing hardware and software Here are a few tips to help ensure safe and easy installation of new hardware (printers, pointing devices, external hard drives, DVD writers, scanners, etc.) and software (applications like ®...
Page 214: If You Need Further Assistance
Since some problems may be related to the operating system or the program you are using, it is important to investigate other sources of assistance first. Try the following before you contact Toshiba: ❖ Review the troubleshooting information in your...
Page 215: Contacting Toshiba
Go to the Tech Support Center, select your particular model from the list and go to the Detailed Specifications for that model. For the number of a Toshiba dealer near you in the United States, call: (800) 457-7777. Contacting Toshiba If you still need help and suspect that the problem is hardware- related, Toshiba offers a variety of resources to help you.
Page 216: Other Toshiba Internet Web Sites
Information about what you were doing when the problem occurred ❖ Exact error messages and when they occurred For technical support, call the Toshiba Global Support Centre: Within the United States at (800) 457-7777 Outside the United States at (949) 859-4273 Other Toshiba Internet Web sites toshiba.com...
Page 217 Spain United States The Rest of Europe Toshiba America Information Toshiba Europe (I.E.) GmbH Systems, Inc. Hammfelddamm 8 9740 Irvine Boulevard D-4-1460 Neuss Irvine, California 92618 Germany United States For more information on additional Toshiba worldwide locations, please visit: www.toshiba.co.jp/index.htm.
Page 218: Appendix A: Hot Keys
Appendix A Hot Keys Hot keys are keys that, when pressed in combination with the key, turn system functions on and off. Hot keys have a legend on the key indicating the option or feature the key controls. Volume Mute This hot key enables/disables volume mute on your computer.
Page 219: Password Security
Hot Keys Password security Password security This hot key blanks the display. Without a password key combination turns off the display and activates instant security. Using the pointing device or any key will make the display’s content reappear, if no password is set for the current user.
Page 220: Maintaining Security When The Battery Is Not Fully Charged
Hot Keys Password security Click the On resume, password protected check box. Click OK. Maintaining security when the battery is not fully charged When the battery is not fully charged (even if the computer is operating on AC power) your display may reappear automatically after a short time.
Page 221: Power Profile
This hot key displays the power profile pop-up window and cycles through the power profiles. (Sample Image) Power profiles The properties of each power profile are set in the TOSHIBA Power Saver utility. For more information, see “TOSHIBA Power Saver” on page 161.
Page 222: Hibernation Mode
Hot Keys Hibernation mode Hibernation mode This hot key places the computer into Hibernation mode. If Hibernation mode is enabled (the default) a message box displays by default to confirm the computer is entering Hibernation mode. You can choose not to display this message box. (Sample Image) Hibernation confirmation box If Hibernation mode is disabled, this hot key will not respond.
Page 223: Display Modes
Hot Keys Display modes Display modes This hot key cycles through the power-on display options. The display modes are: ❖ Built-in display only ❖ Built-in display and external monitor simultaneously ❖ External monitor only ❖ Built-in display and TV (available on certain models) ❖...
Page 224: Disabling Or Enabling Wireless Devices
Hot Keys Disabling or enabling wireless devices Disabling or enabling wireless devices This hot key enables/disables the optional wireless devices installed in your computer. Disabling or enabling the TouchPad This hot key enables/disables the TouchPad. For more information on using the TouchPad, see “Disabling or enabling the TouchPad™”...
Page 225: Zooming Applications In/Out
Hot Keys Zooming applications in/out Zooming applications in/out This hot key turns the Zooming utility to zoom-out. For more information, see “TOSHIBA Zooming Utility” on page 166. This hot key turns the Zooming utility to zoom-in. For more information, see “TOSHIBA Zooming...
Page 226: Appendix B: Power Cord/Cable Connectors
Appendix B Power Cord/Cable Connectors Your notebook computer features a universal power supply you can use worldwide. This appendix shows the shapes of the typical AC power cord/cable connectors for various parts of the world. USA and Canada United Kingdom UL approved CSA approved BS approved...
Page 227: Computer
Appendix C ™ Using ConfigFree with your Toshiba Computer ™ ConfigFree is a set of utilities that makes it easy to control communication devices and network connections. ConfigFree also lets you identify communication problems and create profiles for easy switching between locations and communication networks.
Page 228: Getting Started
❖ Double-click the ConfigFree icon on the Taskbar. ❖ Press the TOSHIBA Assist button (if applicable to your system) to open the TOSHIBA Assist, and then click the ConfigFree icon. ❖ Click the ConfigFree icon on the Taskbar, and then...
Page 229 Using ConfigFree™ with your Toshiba Computer Getting Started If your computer is not connected to a network, the ConfigFree NOTE icon on the Taskbar is displayed with an “X.” When you start a search for wireless devices, ConfigFree Launcher displays on your computer desktop. You can then click the appropriate icon on the Launcher to start the desired ConfigFree utilities.
Page 230: Configfree Utilities
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities (Sample Image) ConfigFree Launcher coming back into view ConfigFree Utilities Connectivity Doctor The Connectivity Doctor lets you analyze your network connections and fix network connection problems. Using Connectivity Doctor, you can view detailed network information by simply moving the mouse pointer.
Page 231 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities ❖ Location of wireless communication switch (identified with a yellow arrow) ❖ Status of wireless communication switch (on or off) (Sample Image) Connectivity Doctor screen Moving the mouse pointer over a wired or wireless network device icon displays information about the device, such as its IP address, subnet mask, and MAC address.
Page 232 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities If a problem or potential problem is detected, in most cases, a screen automatically displays showing you the possible cause and solution for the problem. A triangle containing an exclamation point also appears on the Connectivity Doctor screen, and an orange frame describes the relevant location.
Page 233: Search For Wireless Devices
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Search for Wireless Devices The Search for Wireless Devices utility searches for wireless LAN devices currently used in the neighborhood, and displays information about them on a virtual map. To search for wireless devices: Click the icon in the system tray.
Page 234 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities (Sample Image) Viewing Wi-Fi devices Creating a new wireless connection This feature is only supported on systems running Windows NOTE XP SP2. To add a new wireless connection to an Access Point: Open the Search for Wireless Devices option from ConfigFree Launcher.
Page 235 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities (Sample Image) Dragging a device to the Access Point (Sample Image) Wireless settings screen Enter the SSID/WEP information and connect to the device. After the Access Point is set up and added to the connection...
Page 236: Profile Settings
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Profile Settings The Profile Settings utility lets you save network settings in “profiles.” ConfigFree profiles are useful for easily switching network settings and devices.You can switch network settings simply by selecting the profile with the desired settings.
Page 237 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Select Capture and click OK. The Add Profile screen appears. Enter the name of the profile you want to create. Enter any optional comments, if desired. Click Change Icon and select an icon for this profile.
Page 238: Configfree Summit
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities (Sample Image) Expanded Add Profile screen The online Help provides real-world examples of setting up NOTE profiles for different networking environments. After you set up one or more profiles, you can check their settings and fine-tune them as necessary.
Page 239 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities The SUMMIT utility uses the following types of connections: ❖ Wireless LAN via Access Point ❖ Wireless LAN via Ad Hoc ❖ LAN (same subnet) ❖ Cross cable (Ethernet or Gbit Ethernet)
Page 240 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Files can be shared with one user or all users attending the meeting. ❖ To share a file with one user, drag and drop the file on the user’s icon. Only the SUMMIT Host (the initiator) can share files with NOTE multiple users by this method.
Page 241 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities (Sample Image) Sharing a file with all users Participating users must be connected by LAN or wireless NOTE LAN. Firewall software may prevent ConfigFree SUMMIT from working. Using ConfigFree SUMMIT To host a ConfigFree SUMMIT: Click the icon in the system tray.
Page 242: Quick Connect
“Direct Link Toshiba Device” on page 245. Quick Connect The Quick Connect feature includes two options: ❖ Toshiba Wireless Projector. Switches the Wireless LAN connection to connect to a Toshiba Wireless Projector ❖ Direct Link Toshiba Device. Launches ConfigFree SUMMIT...
Page 243 Because the wireless LAN’ s default connection setting is for NOTE Ad Hoc mode, the Toshiba Wireless Projector will not connect if the projector is set to Infrastructure mode. If this occurs, you can change the wireless LAN’ s connection setting to Infrastructure...
Page 244 Quick Connect function was started: ❖ If the Toshiba Wireless Projector utility is closed ❖ If you select Toshiba Wireless Projector (DPJ) from the ConfigFree tray menu (this disconnects the wireless LAN connection) ❖ If you select a profile from the ConfigFree tray menu or when you disable a wireless device ❖...
Page 245 ConfigFree Utilities Direct Link Toshiba Device When Access Point is not available, use the Direct Link Toshiba Device feature to connect your computer in Ad Hoc (peer-to-peer) mode and use the Summit feature. To use this feature: Display the ConfigFree menu.
Page 246: Using The Automatic Switch
Using ConfigFree™ with your Toshiba Computer Using the Automatic Switch Using the Automatic Switch The Automatic Switch feature allows the computer to automatically switch profiles the next time it is powered on. This feature is particularly useful if you want your computer to automatically switch from the network configuration you use in your office to the one you use at home.
Page 247: Semi-Automatic Switch Feature
Using ConfigFree™ with your Toshiba Computer Semi-Automatic Switch Feature Semi-Automatic Switch Feature The Semi-Automatic feature alerts you when the computer connects to a Service Set Identifier (SSID) stored in a profile, When the computer connects to the designated SSID, a notification window appears.
Page 248: Glossary
Glossary TECHNICAL NOTE: Some features defined in this glossary may not be available on your computer. Acronyms The following acronyms may appear in this user’s guide. alternating current BIOS basic input/output system bits per second compact disc CD-ROM compact disc read-only memory CD-RW compact disc rewrite memory CMOS...
Page 249 Glossary direct memory access DIMM dual inline memory module disk operating system dots per inch DSTN dual supertwist nematic digital versatile (or video) disc DVD-ROM digital versatile (or video) disc read-only memory enhanced capabilities port EPROM erasable programmable read-only memory file allocation table Federal Communications Commission gigabyte...
Page 250 Glossary radio frequency interference read-only memory real-time clock SCSI small computer system interface SDRAM synchronous dynamic random access memory SRAM static random access memory SVGA super video graphics adapter thin film transistor universal serial bus uniform resource locator wide area network World Wide Web Terms The following terms may appear in this user’s guide.
Page 251 Glossary application — A computer program that you use to perform tasks of a specific type. Applications include word processors, spreadsheets, and database management systems. See also program. backup — A copy of a file, usually on a removable disk, kept in case the original file is lost or damaged.
Page 252 Glossary cache — A section of very fast memory in which frequently used information is duplicated for quick access. Accessing data from cache is faster than accessing it from the computer’s main memory. See also CPU cache, L1 cache, L2 cache. CD —...
Page 253 Glossary CPU — See central processing unit (CPU). CPU cache — A section of very fast memory residing between the CPU and the computer’s main memory that temporarily stores data and instructions the CPU will need to execute commands and programs. See also cache, L1 cache, L2 cache.
Page 254 Glossary disk drive — The device that reads and writes information and programs on a diskette or hard disk. It rotates the disk at high speed past one or more read/write heads. diskette — A thin, flexible disk in a protective jacket that stores magnetically encoded data.
Page 255 Glossary executable file — A computer program that is ready to run. Application programs and batch files are examples of executable files. Names of executable files usually end with a .bat or .exe extension. expansion device — A device that connects to a computer to expand its capabilities.
Page 256 — The physical components of a computer system. Compare software. Hibernation — A feature of many Toshiba notebook computers that saves to the hard disk the current state of your work, including all open files and programs, when you turn the computer off. When you turn on the computer again, your work is returned to the same state it was when the computer was turned off.
Page 257 Glossary Internet — The decentralized, world-wide network of computers that provides electronic mail, the World Wide Web, and other services. See also World Wide Web. keyboard shortcut — A key or combination of keys that you use to perform a task instead of using a pointing device such as a mouse. L1 (level one) cache —...
Page 258 Glossary MIDI (Musical Instrument Digital Interface) — A standard for connecting musical instruments, synthesizers, and computers. The MIDI standard provides a way of translating music into a form computers can use, and vice versa. modem — Short for “modulator/demodulator.” A device that converts information from digital to analog, and back to digital, enabling information to pass back and forth between digital computers and analog telephone lines.
Page 259 Glossary optical drive — A drive which reads plastic coated discs on which information is recorded digitally and uses a laser to read data, music, or videos. palette — See color palette. parallel — Processes that occur simultaneously. In communications, it means the transmission of more than one bit of information at a time.
Page 260 Glossary properties — The attributes of an object or device. For example, the properties of a file include the file’s type, size, and creation date. RAM (random access memory) — Volatile memory that can be written to as well as read. Volatile here means that information in RAM is lost when you turn off your computer.
Page 261 “greater than” sign) indicating where users are to enter commands. Toshiba tablet pen — The writing instrument used with the tablet. It is stored on the right side of the computer. TFT display — See active-matrix display.
Page 262 Glossary Wi-Fi — A registered trademark term of the Wi-Fi Alliance that stands for Wireless Fidelity, and is another term for the communication protocol to permit an Ethernet connection using wireless communication components. World Wide Web (www) — The worldwide network of Web sites linked together over the Internet.
Page 263: Index
115 connecting adaptor 48 real-time clock (RTC) 106 accessories removing 116 memory 52 BIOS Setup adding memory 52 see Toshiba Hardware Setup adjusting recording quality 138 button Alt keys 84 power 52 audio start 126 files 137...
Page 264 Index network connection 131 mouse 67 set up 127 disable/enable system resources 182 TOSHIBA Touch and Launch compact disc positioning 98 compact discs Disk Defragmenter 193 handling 98 disk drive inserting 97 corrupted/damaged data files 193 removing 102 missing files/trouble accessing a...
Page 265 Index problem with display settings/ Help and Support current settings not working Windows XP 180 with hardware 191 Hibernation mode 71 program has performed an illegal configuring 75 operation 176 starting again from 77 warning resume failure 177 hot key Error-checking 192 display brightness 223 Ethernet LAN port 132...
Page 266 Index installation 53 URL address not found 180 removing 60 using 133 microphone 137 Internet Explorer icon 126 modem Internet Service Providers 134 connecting to telephone line 129 IRQ (Interrupt Request) 182 determining COM port 128 ISPs 134 problem solving 200 resetting port to default settings jack RJ-11 130...
Page 267 PC Card Plug and Play 183 inserted 198 port computer will not power up 176 COM 128 contacting Toshiba 214 Ethernet LAN 132 corrupted/damaged data files 193 RGB 64 Device Manager 184 power disabling a device 184...
Page 268 127 program not working properly setting up adding memory 52 screen does not look right/flickers computer 43 TOSHIBA Touch and Launch Startup options 179 system resources 182 setting up a connection 131 URL address not found 180 settings...
Page 269 178 TOSHIBA Assist 144 wireless networking 133 Toshiba Hardware Setup 164 Wizards Toshiba online resources 103 Dial-Up Networking Wizard 131 TOSHIBA Touch and Launch 170 World Wide Web 134 disable/enable 173 www 134 Toshiba utilities 143 traveling tips 123 troubleshooting...

This manual is also suitable for:

Satellite m110 series Satellite m115 series

Toshiba M115 S1061 - Satellite - Celeron M 1.6 GHz User Manual

Chapter 1: Getting Started

Chapter 2: Learning the Basics

Chapter 3: Mobile Computing

Chapter 4: Exploring Your Computer's Features

Chapter 5: Toshiba Utilities

Chapter 6: If Something Goes Wrong

Appendix A: Hot Keys

Appendix B: Power Cord/Cable Connectors

Appendix C: Using Configfree™ with Your Toshiba

Quick Links

Related Manuals for Toshiba M115 S1061 - Satellite - Celeron M 1.6 GHz

Summary of Contents for Toshiba M115 S1061 - Satellite - Celeron M 1.6 GHz