Toshiba TE2000 User Manual page 221
Toshiba user's manual portable personal computer te2000
Hide thumbs
Also See for TE2000:
- User manual (292 pages) ,
- Specifications (2 pages) ,
- User manual (218 pages)
Table of Contents
Advertisement
S4 Response formatting character (user defined)
This register determines the ASCII value used as the line feed
character. The modem uses a line feed character in command mode
when it responds to the computer.
Range: 0-127, ASCII decimal
Default: 10 (line feed)
Units:
ASCII
S5 Command line editing character (user defined)
This register sets the character recognized as a backspace and pertains
to asynchronous only. The modem will not recognize the backspace
character if it is set to a value that is greater than 32 ASCII. This
character can be used to edit a command line. When the echo com-
mand is enabled, the modem echoes back to the local DTE the back-
space character, an ASCII space character, and a second backspace
character. This means a total of three characters are transmitted each
time the modem processes the backspace character.
Range: 0-127, ASCII decimal
Default: 8 (backspace)
Units:
ASCII
S6 Wait before dialing
This register sets the length of time, in seconds, that the modem must
wait (pause) after going off-hook before dialing the first digit of the
telephone number. The modem always pauses for a minimum of two
seconds, even if the value of S6 is less that two seconds. The wait for
dial tone call progress feature (W dial modifier in the dial string) will
override the value in register S6. This operation, however, may be
affected by some ATX options according to country/region
restrictions. In some countries/regions, S6 will set dial tone detect
time.
Range: 3-255
Default: 3
Units:
seconds
Appendix D
D-3
Advertisement
Table of Contents
