Fans; Removing The Right Fan - Dell XPS 17 9700 Service Manual

Hide thumbs Also See for XPS 17 9700:

Table of Contents

Steps

1. Align the notch on the solid-state drive with the tab on the SSD2 slot.

2. Slide the solid-state drive into the SSD2 slot.

3. Using the alignment post, place the solid-state drive thermal bracket over the solid-state drive.

4. Align the screw hole on the solid-state drive thermal bracket with the screw hole on the system board.

5. Replace the screw (M2x4) that secures the solid-state drive thermal bracket and the solid-state drive to the system board.

Next steps

1. Install the battery.

2. Install the

base

cover.

3. Follow the procedure in

Fans

Prerequisites

1. Follow the procedure in

2. Remove the

base

cover.

About this task

The following image indicates the location of the right fan (FAN1) and provides a visual representation of the removal procedure.

After working inside your

computer.

Before working inside your

computer.

Removing and installing components

Table of Contents

Show Quick Links

Table of Contents