Nectre Fireplaces N550 Installation Instructions Manual page 10

Wood-fired oven

Hide thumbs Also See for N550:

Table of Contents

Available languages

Installation

Chimney connection

The chimney connector is a single walled pipe used to connect the oven to

the chimney. For use with the N550 Wood-Fired Oven the chimney connector

MUST be 6" (152 mm) in diameter, with a minimum thickness of 24-gauge

black steel or 26-gauge blued steel. The chimney connector must be suitable

for solid fuel, in good condition, and kept clean.

Aluminum or galvanized steel pipe is not acceptable for use with the

N550 Wood-Fired Oven. These materials cannot withstand the extreme

temperatures of a wood fire and can give off toxic fumes when fired.

NOTE: Do not use the connector pipe as a chimney.

Table 5

a) Chimney connection b) Flue pipe attachment

1/4" slope per foot

Install crimped

Flow Direction

Male Part Downwards

end towards

stove

Flue Gases

3 screws

Each chimney connector or flue pipe section must be installed to the oven

flue collar and to each other with the male (crimped) end toward the oven,

as per Figure 5A. Attach each of the sections to one another with three

equidistant metal screws, as per Figure 5B.

www.nectre.com/usa-nectre

Table of Contents

Show Quick Links

Chapters

Table of Contents

N350