IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons, including the following: 1. Read all instructions. 11. Do not let cord hang over edge of table or counter or touch hot 2.
Parts and Features Lid Opening Button Anti-Scale Mesh Filter (inside spout) Water Window Adjustable Temperature Control Power Switch Adjustable Temperature Control Power Switch (with indicator (with indicator light) light) NOTE: Press power switch down to turn the kettle ON (I). The red indicator light will come on.
Page 4
Using the Electric Kettle CAUTION Burn Hazard. Do not overfill kettle. Boiling water may spit out of the spout. NOTE: Press power switch down NOTE: Only use kettle to heat to turn the kettle ON (I). The red water. If kettle is used to heat indicator light will come on.
Page 5
Tea Guide Recommended Temperature Settings and Steeping Times • Bring filtered or good-tasting tap water to a boil in the kettle. Use 6 ounces of water per cup of tea. • If using loose tea instead of tea bags, measure 1 rounded teaspoon of tea per cup into an infuser and place the infuser in the cup.
How to Clean Electrical Shock Hazard. Do not immerse kettle, WARNING power base, or plug in water or any other liquid. 1. With kettle unplugged, empty any remaining water and rinse. Allow kettle to cool. To avoid scale/lime deposit buildup, empty kettle after each use.
Troubleshooting PROBLEM PROBABLE CAUSE Kettle boils dry. If your kettle is accidentally switched on without being filled with water, or is allowed to boil dry, the kettle will shut off automatically. You should: • Turn the switch to OFF (O), unplug, and wait about 15 minutes for the element to cool down.