Samsung Electronics owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited. Trademarks other than Samsung Electronics are
Table of contents Preparations Specifications Checking the Components General Parts Preset Timing Modes Ports OH85N OH85N-DK/OH85N-DJ Appendix Before Installing the Product (Installation License Guide) Rotation Ventilation Before connecting cables Power cable connection guide Wall Mount Specifications...
Batteries (AAA x 2) may differ from the images shown. Quick Setup Guide Regulatory guide (Not available in some locations) (Not available in some locations) Clamper x 6 Cover-Cap x 16 Remote Control (Supported model: OH85N-DK, (Supported model: OH85N) OH85N-DJ)
Parts Parts Description Press a button on the remote control pointing at the sensor on the front of the product to perform the corresponding function. " The color and shape of parts may differ from what is shown. Remote sensor Specifications are subject to change without notice to improve quality.
Description USB ¨ Connect to a USB memory device. Connects to MDC using a LAN cable. (10/100 Mbps) OH85N RJ45 " Use Cat7(*STP Type) cable for the connection. *Shielded Twist Pair. " The color and shape of parts may differ from what is shown.
OH85N-DK/OH85N-DJ Port Description Connect to a USB memory device. " The color and shape of parts may differ from what is shown. 1 USB ¨ Specifications are subject to change without notice to improve quality. Connects to MDC using a LAN cable. (10/100 Mbps) 2 RJ45 "...
Ventilation Guide) " Supported model: OH85N " OH85N-DK and OH85N-DJ are double-sided display models. When installing the product, allow space of at least 200 mm from the ceiling and floor, and keep the ambient temperature below 50 °C. To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions.
Before connecting cables OH85N " The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Unfasten the screws, then remove the cover. The cable should be connected as shown.
Page 9
OH85N-DK " The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Remove screws from the brackets on both sides of the Insert the appropriate cable into the hole from which product.
Page 10
OH85N-DJ " The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Remove screws from the brackets on both sides of the Insert the appropriate cable into the hole from which product.
Power cable connection guide " The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. OH85N Make sure that you have a 8.5 mm diameter Put the soldered (connected) part of the power cables waterproof power cable that can withstand 1800 W or inside the product.
Page 12
OH85N-DK Make sure that you have a 8.5 mm diameter Once all cables are connected, place the cable staple waterproof power cable that can withstand 1800 W or ( ) back to the bottom of the main display ( ).
Page 13
OH85N-DJ Make sure that you have a 8.5 mm diameter Once all cables are connected, place the bracket PCB waterproof power cable that can withstand 1800 W or ( ) back to the bottom of the main display ( ).
Page 14
Different power cable colors by country When connecting an external power cable, be sure to match the colors of its wires with those of the 3 wires inside the product’s power cable. The meaning (Neutral, Live or Ground) of each wire color of the external power cable may differ depending on the country.
Page 15
Wiring " Supported model: OH85N-DK • Use the enclosed clampers ( ) to securely organize cables as shown in the below images. Main display ( ) Auxiliary display ( ) " Supported model: OH85N-DJ • Use the enclosed clampers ( ) to securely organize cables as shown in the below images.
" Do not fasten the screws too firmly. This may damage the product or cause the product to fall, leading to personal injury. Samsung is not liable for these kinds of accidents. " Do not keep the product turned on during the installation of the wall mount. It may result in personal injury due to electric shock.
Refer to the label at the back of the product as the standard performance. voltage can vary in different countries. " For detailed device specifications, visit the Samsung Electronics website. Temperature: -22 °F – 122 °F (-30 °C – 50 °C) * Refer to Installation Guide for installation with an enclosure Operating exposed to direct sunlight.
To avoid this, it is recommended that you select the optimum resolution specified for your product. " Horizontal Frequency Model Name OH85N / OH85N-DK / OH85N-DJ The time required to scan a single Horizontal Frequency 15 - 135 kHz (HDMI), 30 - 135 kHz (DP)
Page 19
The screen will automatically be adjusted if a signal that belongs to the following standard Horizontal Vertical signal modes is transmitted from your PC. If the signal transmitted from the PC does not belong Pixel Clock Sync Polarity Frequency Frequency Resolution to the standard signal modes, the screen may be blank with the power indicator on.
YOUR USE OF THIS PRODUCT IN CONNECTION WITH HEVC ENCODED CONTENT IS DEEMED ACCEPTANCE OF THE LIMITED AUTHORITY TO USE AS NOTED ABOVE. For information on the Open Source License Notice, contact the Samsung Customer center or send email to oss.request@samsung.com.