hit counter script

Identification Data - Siemens SIMATIC ET 200M Manual

Distributed i/o device
Hide thumbs Also See for SIMATIC ET 200M:
Table of Contents

Advertisement

Functional grounding
Grounding which has the sole purpose of safeguarding the intended purpose of
the electrical equipment. Functional grounding short-circuits interference
voltages which would otherwise have an impermissible impact on the equipment.
Ground
The conductive mass of earth, the electrical potential of which can be set to zero
at any point.
In the vicinity of grounding electrodes the potential may not be zero. The term
"reference ground" is often used here.
Grounding
Grounding means to connect a conductive component with the grounding
electrode via a ground system.
H system
System with high availability consisting of at least two central processing units or
two separate devices, e.g. PCs (master/reserve). The user program is processed
identically in the master and reserve PCs.

Identification data

Identification data is information stored in a module and supports the user when
S eliminating faults in a system
S checking the system configuration
S locating hardware modifications in a system
I/O bus
The I/O bus is part of the ³ S7-300 backplane bus in the programmable logic
controller, optimized for the rapid exchange of signals between the IM 153-x
module(s) and the signal modules. ³ User data (e.g. digital input signals of a
signal module) and system data (e. g. default parameter data records of a signal
module) are transferred via the I/O bus.
I/Os, single-channel
A single-channel I/O is when – in contrast to redundant I/Os – the I/O module is
available only once for a process signal. It can be connected on a one-sided or
switched basis.
Distributed I/O Device ET 200M
EWA-4NEB780600602-06
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Glossary
Glossary-5

Advertisement

Table of Contents
loading

Table of Contents

Save PDF