Table of Contents
Advertisement
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the back
of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep
this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2019 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
19e
Advertisement
Table of Contents
Related Manuals for Harbor Freight Tools PITTSBURGH AUTOMOTIVE 56411
Summary of Contents for Harbor Freight Tools PITTSBURGH AUTOMOTIVE 56411
- Page 1 No portion of this manual or any artwork contained herein may be reproduced in Failure to do so can result in serious injury. any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing SAVE THIS MANUAL.
-
Page 2: Important Safety Information
WARNING SYMBOLS AND DEFINITIONS This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. Indicates a hazardous situation which, if not avoided, will result in death or serious injury. -
Page 3: Specifications
Maintain the Punch Driver Kit 13. Use the right product for the job. with care. Keep this product clean. There are certain applications for Properly maintained products are which this product was designed. less likely to malfunction. Do not use Do not use small products to do the damaged products. - Page 4 Operating Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document including all text under subheadings therein before set up or use of this product. Bleed air from Hydraulic System Thread the end of the Threaded before first use.
- Page 5 11. Thread the Punch down onto the 13. Grasp the Pump Handle and pump workpiece as tightly as possible. it up and down until the Punch has punched through the workpiece. 12. Turn the Release Valve to the “ON” position. Refer to Figure B. 14.
-
Page 6: Maintenance
Maintenance Procedures not specifically explained in this manual must be performed only by a qualified technician. TO PREVENT SERIOUS INJURY FROM TOOL FAILURE: Do not use damaged equipment. If abnormal noise or vibration occurs, have the problem corrected before further use. BEFORE EACH USE, inspect the AFTER EACH USE, wipe external general condition of the tool and... -
Page 7: Troubleshooting
Bleeding Instructions During shipment and handling, air may Pump the Pump Handle. get trapped in the hydraulic system. Release the Hose Coupler until This can interfere with the performance oil flows out of the Hose. of the Punch Driver Kit. Bleed air Reattach the Hose to the Punch Head. - Page 8 PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS DOCUMENT AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.
- Page 9 Record Serial Number Here: Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Item 56411 For technical questions, please call 1-888-866-5797. Page 9...
-
Page 10: Parts List And Diagram
Parts List and Diagram Parts List Part Description Part Description Hydraulic Pump Tube Oil Seal Valve Punch 1.115" for 3/4" Pipe Nylon Washer Punch 1.362" for 1" Pipe Spring Punch 1-11/16" for 1-1/4" Pipe Steel Ball Punch 1-15/16" for 1-1/2" Pipe Steel Ball Punch 2-3/8"... - Page 11 Diagram Item 56411 For technical questions, please call 1-888-866-5797. Page 11...
-
Page 12: Limited 90-Day Warranty
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.