Worksheet Entries - HP 98568A Installation Instruction
Hp 9000 series 300 computers
Hide thumbs
Also See for 98568A:
- Service information manual (142 pages) ,
- Service information manual (144 pages)
Table of Contents
Advertisement
HP 98730A Graphics Display Station
Worksheet Entries
You have now installed your HP 98730A Graphics Display Station.
Refer to the Starbase Graphics Techniques HP- UX Concepts and Tutorials
manual for further details.
The following "Worksheet Entries" contain information needed to use your HP
98730A with HP-UX.
Copy this information to a worksheet (worksheets are found at the end of
Chapter 1, "Getting Started") or remember to refer here when you need it.
When finished, you'll be ready to install your next peripheral. If you have
installed all of your peripherals, refer to the Series 300 HP- UX System
Administration Tasks manual that came with your HP-UX operating system.
Using 010-1
This is the default setting on the 98726A interface card. The setting in
Table 8-10 requires the jumper JP1 to be in the $200000 position on the
interface card. This is the recommended choice for the HP 98726A / HP
98730A subsystem used as a console.
Switch Setting
MSB ... LSB
01010110
Table 8-10.
HP 98730A
Set to Internal Addressing Mode
CTL_BASE
Select
Path
File
(hex)
Code
Name
Type
$560000
internal
/dev/display
c
Major
Minor
Number
Number
12
OxOOOOOO
The settings in Table 8-11 require the jumper JP1 to be in the $800000
position on the interface card.
Adding Plotters & Other
8-27
Graphics Devices
- Quick Links:
- Table of Contents
- Getting Started
- Description
Hide quick links:
Advertisement
Chapters
Table of Contents
