Worksheet Entries - HP 98568A Installation Instruction
Hp 9000 series 300 computers
Hide thumbs
Also See for 98568A:
- Service information manual (142 pages) ,
- Service information manual (144 pages)
Table of Contents
Advertisement
HP 7957 A/7958A Disk Drives
Worksheet Entries
You have now installed your 7957 A/7958A Disk Drive.
The following "Worksheet Entries" contain information needed to use your disk
drive with the HP-UX operating system. Refer to the entries for the interface
you will be using.
Copy this information to a worksheet (worksheets are found at the end of
Chapter 1, "Getting Started") or remember to refer here when you need it.
When finished, you will be ready to install your next peripheral. If you
have installed all of your peripherals, refer to the Series 300 HP- UX System
Administration Tasks manual that came with your HP-UX operating system.
Table 6-16.
HP7957 A/7958A
Connected to HP 98625 Disk Interface (Select Code 14)
Device
Path*
File
Major
Minor **
Interleave
Name
Name
Type Number
Number
' Factor
HP 7957 A/7958A
/dev/dsk/#sO
b
0
OxOeOnOO
1
HP 7957 A/7958A
/dev/rdsk/#sO
c
4
OxOeOnOO
1
*
#
is a number that identifies the disk drive (e.g. 0 for the root, 1 for the next
disk installed, etc.). Replace
#
with any unique number, and use the same
number in both the /dev/dsk and /dev/rdsk entries (e.g. /dev/dsk/1s0 and
/dev /rdsk/1s0). Record the numbers on the Chapter 6, "Mass Storage" tab.
**
n is a number that identifies the address (set in step 3 of the Installation
Procedure). Replace
n with a 1 if the address was set to 1, use 4 if the address
was set to 4, and so on.
Adding Mass Storage Devices
6-51
- Quick Links:
- Table of Contents
- Getting Started
- Description
Hide quick links:
Advertisement
Chapters
Table of Contents
