Table of Contents
Advertisement
● Insert the connector firmly. Risk of sensor head or controller damage if not completely
connected.
4.3.4 Disconnecting from the Controller
Grasp the controller, and while pressing on the lock release lever on the controller connector of
the sensor head connection cable, pull the lever toward you to disconnect the cable.
● If you attempt to disconnect the cable by pulling it without pressing the lock release lever,
cable wire breakage and connector damage may occur.
4.3.5 Connecting and Disconnecting to / from Controller Connector
The cable on the controller connector side can be shortened.
Use the following procedures to disconnect and connect the cable from / to the controller
connector.
WUME-HGT-6
4.3 Connecting the Sensor Head Connection Cable
4-7
Advertisement
Table of Contents
