Connecting The Display Device - Toshiba TE2000 User Manual
Te2000 user's guide
Hide thumbs
Also See for TE2000:
- User manual (274 pages) ,
- Specifications (2 pages) ,
- User manual (218 pages)
Table of Contents
Advertisement
56
Connecting Other External Devices
Using external display devices
Connecting the display device
If you're connecting a television or other video display device to
the computer's video-out port, first refer to "Selecting video
cables" below for guidelines on choosing a video cable, then refer
to
"Connecting to the video-out (composite) port" on page
If you're connecting an SVGA monitor, skip to
external monitor or projector" on page
Selecting video cables
To connect a device to the video-out port, you'll need to purchase
a composite video cable. For the best video quality, always use a
properly shielded cable.
HINT: Toshiba recommends using a cable no longer than
20 feet (approximately 6 meters).
Using a poor quality cable may result in a dull or fuzzy picture,
poor color, ghosting, video noise, or loss of video.
Connecting to the video-out (composite) port
NOTE: Video cables are not included with your computer. To
connect a device to the video-out port, you'll need to
purchase a composite video cable.
To connect the device:
1
Connect one end of the video cable to the external video
device.
Refer to the documentation provided with the device for the
location of its video-in port.
"Connecting an
57.
56.
Advertisement
Table of Contents
