Table of Contents
Advertisement
64
Error messages
If you receive an error message, note the message and take the
corrective action. The following table lists the error messages in
alphabetical order together with the recommended course of action.
Error Messages
CMOS Battery Bad
CMOS Checksum Error
Disk Boot Failure
Diskette Drive
Controller Error or No
Controller Present
Diskette Drive Error
Diskette Drive Type
Mismatch
Equipment
Configuration Error
Hard Disk 0 Error
Hard Disk 0 Extended
Type Error
I/O Parity Error
Insert system diskette
and press <Enter> key
to reboot
3 Troubleshooting your computer
Corrective Action
Contact your dealer or an authorized service
center.
Contact your dealer or an authorized service
center.
Insert a system (bootable) diskette into the floppy
drive (A:), then press Enter to reboot.
Contact your dealer or an authorized service
center.
Contact your dealer or an authorized service
center.
Press F2 (during POST) to enter the BIOS Utility;
then press Esc to exit and reconfigure the
computer.
Press F2 (during POST) to enter the BIOS Utility;
then press Esc to exit and reconfigure the
computer.
Contact your dealer or an authorized service
center.
Contact your dealer or an authorized service
center.
Contact your dealer or an authorized service
center.
Insert a system (bootable) diskette into the floppy
drive (A:), then press Enter to reboot.
Advertisement
Table of Contents
Troubleshooting
