Related Manuals for Siemens TPS4 Series
Summary of Contents for Siemens TPS4 Series
- Page 1 Installation Guide / User Manual Surge Protection Devices TPS4 Series Products for Panelboards, Switchboards and other Apparatus usa.siemens.com/spd...
- Page 2 The voltage rating of the SPD and system must be verified before energizing the SPD. Prior to installing the TPS4 SPD, verify that the unit has NEC® Art. 285, UL 1449, contact your local Siemens sales the correct voltage rating for the equipment installed Failure to follow these guidelines can lead to abnormally high voltages at the SPD.
-
Page 3: General Information
(a) Is trained and authorized to energize, deenergize, clear, of shipping or handling, immediately file a claim with the ground and tag circuits and equipment in accordance shipping company and forward a copy to your local Siemens with established safety practices. sales office. - Page 4 Catalog # The following instructions are for the installation of the TPS4 with the offset oriented towards the top of the unit. Siemens TPS4 01 and L1 SPD modules in Siemens Revised P1 Torque Screws to values listed. (RP1) lighting panelboards.
- Page 5 The following instructions are for the installation of the installed TPS3 or TPS4 unit.) the panelboard. This differs from non-W models, which bolts Siemens TPS4 01 and L1 SPD modules in Siemens P2 and P3 directly to bus bars. lighting panelboards (also for field replacement.)
- Page 6 Puede causar la muerte o lesiones graves. Danger de mort ou risque de blessures graves. assembly in the Siemens TPS4 01 and L1 SPD modules. The Turn off and lock out all power supplying this Desenergice totalmente antes de instalar o Couper l’alimentation de l’appareil et barrer...
- Page 7 TPS4 05 Installation Instructions for: Module Only Replacement Instructions Power Panelboards (P4, P5) and Distribution The following instructions are for the replacement of Siemens TPS4 05 SPD for P4, P5 Power Panelboards and Distribution Switchboards Switchboards TPS4 SPD module in Siemens TPS4 05 unit.
- Page 8 Module Only Replacement Instructions Switchboards and Low Voltage Switchgear TPS4 06 for Switchboards and Low Voltage Switchgear The following instructions are for the replacement of Siemens General Suppressor Series TPS4 SPD module in Siemens TPS4 06 unit. Full Catalog ID Replacement Instructions...
-
Page 9: Lcd Panel Operation
TPS4 Surge Protection Devices | Installation Guide / User Manual Installation Guide / User Manual | TPS4 Surge Protection Devices Operation LED Operation • Each SPD contains 1 dual color LED per phase shown in the appropriate voltage configuration. TPS4 surge protective devices require minimal attention after installation. - Page 10 TPS4 Surge Protection Devices | Installation Guide / User Manual Installation Guide / User Manual | TPS4 Surge Protection Devices About Screen Adjust Date Screen The About Screen displays the manufacturer’s information, the model number The Adjust Date Screen will allow you to set the date of the SPD. Use the UP/ and the serial numberfor this specific SPD.
-
Page 11: Maintenance
SPD will fail. Should the SPD be subjected to a full power outage this animation will be The Siemens TPS4 unit is designed for years of reliable, Incorrectly bonded distribution systems damage SPDs. shown once power is restored. It will remain on screen until acknowledged trouble- free operation. - Page 12 TPS4 Surge Protection Devices | Installation Guide / User Manual Notes...
- Page 13 Actual results are dependent on variable conditions. Accordingly, Siemens does not make representations, warranties, or assurances as to the accuracy, currency or completeness of the content contained herein. If requested, we will provide specific technical data or specifications with respect to any customer’s particular applications.