11. INFORMATION FOR TEST INSTITUTES............18 WE’RE THINKING OF YOU Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time.
Page 3
ENGLISH of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.1 Children and vulnerable people safety This appliance can be used by children aged from 8 • years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a...
– with food and accessible drainage systems; store raw meat and fish in suitable containers in the – refrigerator, so that it is not in contact with or drip onto other food.
Page 5
ENGLISH connecting the appliance to the power • Do not pull the mains cable to supply. This is to allow the oil to flow disconnect the appliance. Always pull back in the compressor. the mains plug. • Before carrying out any operations on 2.3 Use the appliance (e.g.
• This appliance contains hydrocarbons spare parts are relevant for all in the cooling unit. Only a qualified models. person must do the maintenance and • Door gaskets will be available for 10 the recharging of the unit. years after the model has been •...
Page 7
ENGLISH 3.1 Dimensions Overall dimensions Space required in use 1750 1) the height, width and depth of the appli‐ ance including the handle, plus the space necessary for free circulation of the cooling 1) the height, width and depth of the appli‐ ance without the handle and feet Overall space required in use Space required in use...
Page 8
If you have any doubts regarding where to install the Overall space required in use appliance, please turn to the 1193 vendor, to our customer service or to the nearest 1) the height, width and depth of the appli‐...
ENGLISH 3.5 Rubber plugs 3.6 Door reversibility If you position the appliance against a Please refer to the separate document wall, install the rubber plugs on the rear with instructions on installation and door spacers. reversal. CAUTION! At every stage of reversing the door protect the floor from scratching with a durable material.
4.6 FastCool function You can deactivate this function at any time by If you need to insert a large amount of pressing the temperature food at ambient temperature into the key and choosing a new fridge compartment, for example after temperature setting.
Page 11
ENGLISH 1. Remove surrounding drawers (refer to "Removing drawers"). 2. Pull out locking pins on both sides of the shelf (1). 3. Pull the glass shelf outwards (2). It is possible to activate the device manually by switching on FastCool function.
1. Pull the drawer out until it stops. 2. Once you reach the end of the runners, lift slightly the front of the drawer and remove it from the appliance. To put the drawer into a compartment, follow the above steps in reverse order.
ENGLISH 6.3 Hints for food refrigeration or a polythene bag to exclude as much air as possible. • Meat (all types): wrap in a suitable • Bottles: close them with a cap and packaging and place it on the glass place them on the door bottle shelf, or shelf above the vegetable drawer.
2. Remove all food. 4. Leave the door open to prevent 3. Clean the appliance and all unpleasant smells. accessories. 8. TROUBLESHOOTING WARNING! Refer to Safety chapters. 8.1 What to do if... Problem Possible cause Solution The appliance does not The appliance is switched Switch on the appliance.
Page 15
ENGLISH Problem Possible cause Solution The compressor does not The compressor starts af‐ This is normal, no error start immediately after ter a period of time. has occurred. pressing the "FastCool", or after changing the temper‐ ature. Door is misaligned or inter‐ The appliance is not level‐...
Page 16
Problem Possible cause Solution Water flows inside the re‐ Food products prevent the Make sure that food prod‐ frigerator. water from flowing into the ucts do not touch the rear water collector. plate. The water outlet is clog‐ Clean the water outlet.
ENGLISH 8.3 Closing the door If the advice does not lead to the desired result, call the 1. Clean the door gaskets. nearest Authorized Service 2. If necessary, adjust the door. Refer Centre. to installation instructions. 3. If necessary, replace the defective 8.2 Replacing the lamp door gaskets.
See the link on the rating plate of the appliance. detailed information about the energy label. 11. INFORMATION FOR TEST INSTITUTES Installation and preparation of the clearances shall be as stated in this User appliance for any EcoDesign verification Manual at Chapter 3.