Read this manual prior to initial operation of the product! Dear Customer, We hope that your product, which has been manufactured in modern facilities and passed through a strict quality control procedure, will give you very good results. We advise you to read through this manual carefully before using your product and keep it for future reference. This User Manual will •...
Important safety information This section includes safety information that will help plenty of detergent before being dried in the dryer. protection from risks of personal injuries or materialistic • Garments or pillows bolstered with rubber foam damages. Failure to follow these instructions shall cause (latex foam), shower bonnets, water resistant any warranty and reliability commitment to become void.
Compliance with the WEEE Directive and • Remove the door of the drying compartment before decommissioning or disposing of the product. Disposing of the Waste Product: • The final step of the drying cycle (cool-down cycle) This product complies with EU WEEE occurs without applying heat to ensure that the Directive (2012/19/EU).
Installation Refer to the nearest Authorised Service Agent for Ventilation hose and connection (for products installation of your product. equipped with an outlet vent) Preparation of location and electrical installation for Ventilation hose allows exhaust air from inside the the product is under customer’s responsibility. machine Installation and electrical connections must be carried Vented dryer has 1 air outlet.
Adjusting feet First use In order to ensure that your product operates more silently • To have the product ready for operation before and vibration-free, it must stand level and balanced on its calling the authorised service agent, make sure feet.
Technical Specifications Height (adjustable) 85.0 cm Width 59.5 cm Depth 54 cm Capacity (max.) 7 kg Weight (net) 31 kg Voltage See type label Rated power input Model code Type label is located behind the loading door. 7 EN...
Initial preparations for drying Things to be done for energy saving: Laundry unsuitable for drying in the machine • • Laundry items with metal attachments such as belt Make sure that you operate the product at its full buckles and metal buttons can damage your dryer. capacity but pay attention to not exceeding it.
• Sort your laundry according to their types and Following weights are given as examples. thicknesses. Dry the same type of laundry together. Approximate E.g.: fine kitchen towels and table cloths dry faster Home articles weights (g) than the thick bath towels. Correct load capacity Cotton quit covers (double) 1500...
Selecting a Programme and Operating Your Machine Control panel 1. Filter cleaning warning light 4. On/Off button Warning light turns on when the filter is full. Used to turn on and off the machine. 2. Program follow-up indicator 5. Programme selection knob Used to follow-up the progress of the current Used to select a programme.
Preparing the machine •Mini You can use this programme to dry the cottons that are 1. Plug in your machine. spun at high speeds in your washing machine. It can dry 2. Place the laundry in the machine. your 1,2 kg Cotton laundry (3 Shirts / 3 T-Shirts) within 30 3.
Auxiliary function Press “Start/Pause/Cancel” button for 3 seconds Cancel audio warning to cancel the programme or turn the programme Your dryer will give an audio warning when the programme selection knob in any direction to end the comes to an end. If you do not want to hear the audio programme while the machine is running.
Press the relevant buttons for 3 seconds to activate the child-proof lock. A long beep will be heard and the child-proof lock will be activated. A double beep will be heard if you press any button or turn the programme selection knob while the child-proof lock is active.
Maintenance and cleaning Sensor (models with a sensor) Lint filter There are humidity sensors in your dryer that detect Lint and fibres released from the laundry to the air during whether the laundry is dry or not. the drying cycle are collected in the “Lint Filter”. Such fibre and lint are generally formed during wearing and washing.
Solution suggestions for problems Drying process takes too much time • Meshes of the filter may be clogged. Wash with water. Laundry come out wet at the end of drying. • Meshes of the filt er may be clogged. Wash with water. •...