Page 2
AUX......................12 • (Page XX) indicates references are available on the stated page. Using Other Applications ..............13 KENWOOD Remote application This symbol on the product means there are important TuneIn Radio/TuneIn Radio Pro operating and maintenance instructions in this manual.
Page 3
Before Use IMPORTANT • USB rating is indicated on the main unit. To view, detach the faceplate. (Page 4) • To ensure proper use, please read through this manual before using this • Depending on the types of cars, the antenna will automatically extend product.
Page 4
Basics Faceplate Remote control (RC-406) Volume knob Display window* Remote sensor (Do not expose to bright sunlight.) Lights up when Bluetooth connection is established. (Page 14) Pull out the insulation sheet when using for the first time. Detach button * Only for illustration purpose. Attach Detach How to reset...
Page 5
Getting Started To adjust the clock Turn the volume knob to select [CLOCK ADJUST], then press the knob. Turn the volume knob to make the settings, then press the knob. Set the time in the order of “Hour” “Minute”. Turn the volume knob to select [CLOCK FORMAT], then press the knob. Turn the volume knob to select [12H] or [24H], then press the knob.
Page 6
[OFF]: [ZONE 1] illumination remains as [COLOR SELECT] color. For details on how to update the firmware, visit (Page 24) <www.kenwood.com/cs/ce/>. • [ZONE 2] illumination changes to light blue color when you enter [FACTORY RESET] [YES]: Resets the settings to default (except the stored station). ;...
Page 7
Radio Other settings Press the volume knob to enter [FUNCTION]. Turn the volume knob to select an item (see the following table), then press the knob. Repeat step 2 until the desired item is selected/activated or follow the instructions stated on the selected item. Press and hold to exit.
Page 8
USB/iPod Radio Connect a USB device [TI] [ON]: Allows the unit to temporarily switch to Traffic Information if available (“TI” indicator lights up). ; [OFF]: Cancels. USB input terminal [PTY SEARCH] 1 Turn the volume knob to select the available Program Type (see the CA-U1EX (max.: 500 mA) following “Available Program Type for [PTY SEARCH]”), then press the (optional accessory)*1...
Page 9
USB/iPod Select music drive While in USB source, press 5 repeatedly. Stored songs in the following drive will be played back. • Selected internal or external memory of a smartphone (Mass Storage Class). • Selected drive of a multiple drive device. On the faceplate On the remote control You can also select the music drive from the [FUNCTION] menu.
Page 10
USB/iPod • To cancel, press or DIRECT. Turn the volume knob to select a file, then press the knob. • Not available if Random Play is selected. Selected file starts playing. • Not applicable for iPod USB source. [SKIP SEARCH] setting Press the volume knob to enter [FUNCTION].
Page 11
Spotify You can listen to Spotify on iPhone/iPod touch (via Bluetooth or via USB On the faceplate On the remote control input terminal) or Android device (via Bluetooth). Press 6 IW. Press ENT IW. Play back/pause Preparation: Press S*3 / T. Press S*3 / T (+).
Page 12
Spotify You can listen to music from a portable audio player via the auxiliary input Search for a song or station jack. Press Preparation: Turn the volume knob to select a list type, then press the knob. Select [ON] for [BUILT-IN AUX] in [SOURCE SELECT]. (Page 6) The list types displayed differ depending on the information sent from Spotify.
Page 13
Repeat step 2 until the desired item is selected/activated. Press and hold to exit. You can control the KENWOOD car receiver from iPhone/iPod touch (via Bluetooth or via USB input terminal) or Android device (via Bluetooth) using To return to the previous setting item, press KENWOOD Remote application.
Page 14
Bluetooth features may not work with this Press B SRC to turn on the unit. unit. Search and select the name of your receiver (“KMM-BT306”) on the • Be sure to turn on the Bluetooth function of the device to make the Bluetooth device.
Page 15
Bluetooth® The following operations may differ or be unavailable depending on the Auto Pairing connected phone. When you connect iPhone/iPod touch to the USB input terminal, pairing request (via Bluetooth) is automatically activated if [AUTO PAIRING] is set to On the faceplate On the remote control [ON].
Page 16
Bluetooth® *1 This adjustment will not affect the volume of the other sources. Make a call *2 Press and hold VOL to continuously increase the volume to 15. *3 Operations may vary according to the connected Bluetooth device. You can make a call from the call history, phonebook, or dialing the number. Call by voice is also possible if your mobile phone has the feature.
Page 17
Bluetooth® Make a call using voice recognition [PHONE BOOK] (Applicable only if the phone supports PBAP.) 1 Turn the volume knob quickly to enter alphabet search mode (if the Press and hold to activate the voice recognition of the connected phonebook contains many contacts).
Page 18
To return to the previous setting item, press Press and hold “PLEASE PAIR YOUR PHONE PIN 0000” appears on the display. Default: [XX] Search and select the name of your receiver (“KMM-BT306”) on the [BT MODE] Bluetooth device. [PHONE SELECT] Operate the Bluetooth device to confirm pairing.
Page 19
Bluetooth® Bluetooth — Audio On the faceplate Repeat play Press 4 repeatedly. [ALL REPEAT], [FILE REPEAT], [GROUP REPEAT]*, [REPEAT OFF] Random play Press and hold 3 to select [ALL RANDOM] or [GROUP RANDOM]*. • Press 3 to select [RANDOM OFF]. While in BT AUDIO source, you can connect to five Bluetooth audio devices Select a file from a folder/list Refer to “Select a file to play”...
Page 20
Audio Settings [MANUAL EQ] Adjusts your own sound settings for each source. • The settings are stored to [USER] in [PRESET EQ]. • The settings made may affect the current settings of [EASY EQ]. [62.5HZ] [LEVEL] [LEVEL –9] to [LEVEL +9] ([LEVEL +5]): Adjusts the level to memorize for each source.
Page 21
Audio Settings Crossover settings [FADER] (Not applicable if 3-way crossover is selected.) [R15] to [F15] ([0]): Adjusts the front and rear speaker output balance. Below are the available setting items for 2-way crossover and 3-way [BALANCE] [L15] to [R15] ([0]): Adjusts the left and right speaker output balance. crossover.
Page 23
Audio Settings [MID RANGE] [HPF FRQ] [30HZ]/[40HZ]/[50HZ]/[60HZ]/[70HZ]/[80HZ]/[90HZ]/ [DTA SETTINGS] [100HZ]/[120HZ]/[150HZ]/[180HZ]/[220HZ]/[250HZ]/ [POSITION] Selects your listening position (reference point). [THROUGH] [ALL]: Not compensating ; [FRONT RIGHT]: Front right seat ; [HPF SLOPE] [–6DB]/[–12DB] [FRONT LEFT]: Front left seat ; [FRONT ALL]: Front seats •...
Page 24
Display Settings Audio Settings When 3-way crossover is selected: Zone identification for color settings and brightness settings [TWEETER LEFT]/[TWEETER RIGHT]/[MID LEFT]/[MID RIGHT]/[WOOFER] – You can only select [WOOFER] if a setting other than [NONE] is selected for [WOOFER] of [SPEAKER SIZE]. (Page 22) •...
Page 25
Display Settings Default: [XX] [LEVEL METER] [ON]: Shows the level meter on the display window (as shown below). ; [OFF]: Cancels. [DISPLAY] [COLOR SELECT] Selects illumination colors for [ALL ZONE], [ZONE 1] and [ZONE 2] separately. 1 Select a zone. (See the illustration on page 24.) Level meter 2 Select a preset color for the selected zone.
Page 26
Installation/Connection Part list for installation This section is for the professional installer. For safety’s sake, leave wiring and mounting to professionals. Consult the (A) Faceplate (×1) (B) Trim plate (×1) car audio dealer. WARNING • The unit can only be used with a 12 V DC power supply, negative ground. •...
Page 27
Installation/Connection Installing the unit (in-dash mounting) Installing the unit (without mounting sleeve) Remove the mounting sleeve and trim plate from the unit. Align the holes in the unit (on both sides) with the vehicle mounting bracket and secure the unit with screws (supplied). Use only the specified screws.
Page 28
If no connections are made, do not let the wire come out from the tab. White/Black For 3-way crossover: Mid range speaker (left) Gray To front speaker (right)/ Brown To connect the KENWOOD navigation system, refer your Gray/Black For 3-way crossover: Mid range speaker (right) (Mute control wire) navigation manual Green...
Page 29
More information Output terminals (See the following “Connect external amplifiers via output terminals”.) For: – Latest firmware updates and latest compatible item list – KENWOOD original application – Any other latest information Connect external amplifiers via output terminals Visit <www.kenwood.com/cs/ce/>.
Page 30
• The song order displayed on the selection menu of this unit may differ from that of the iPod/ iPhone. Main display • You cannot operate iPod if “KENWOOD” or “ ” is displayed on iPod. • Depending on the version of the operating system of the iPod/iPhone, some functions may not operate on this unit.
Page 31
Troubleshooting Symptom Remedy Symptom Remedy Sound cannot be heard. • Adjust the volume to the optimum level. “UNSUPPORTED DEVICE” • Check whether the connected USB device is compatible • Check the cords and connections. appears. with this unit and ensure the file systems are in supported formats.
Page 32
Troubleshooting Symptom Remedy Symptom Remedy “MEMORY FULL” You have reached the maximum storage limit of your Voice calling method is not • Use voice calling method in a more quiet environment. iPod/iPhone. successful. • Reduce the distance from the microphone when you speak the name.
Page 33
Specifications FM Frequency Range 87.5 MHz — 108.0 MHz (50 kHz step) Channel Separation 92 dB Usable Sensitivity 8.2 dBf (0.71 μV/75 Ω) MP3 Decode Compliant with MPEG-1/2 Audio Layer-3 (S/N = 30 dB) WMA Decode Compliant with Windows Media Audio Quieting Sensitivity 17.2 dBf (2.0 μV/75 Ω) AAC Decode...
Page 34
Specifications • Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Maximum Output Power 50 W × 4 Corporation in the United States and/or other countries. Full Bandwidth Power 22 W × 4 • Use of the Made for Apple badge means that an accessory has been designed to connect specifically (at less than 1 % THD) to the Apple product(s) identified in the badge and has been certified by the developer to meet Apple performance standards.
Page 35
SOFTWARE LICENSE AGREEMENT Article 4 Right pertaining to the Licensed Software The software embedded in the Product (hereinafter the "Licensed Software") provided by Licensor is Any and all copyrights and other rights pertaining to the Licensed Software and related documents copyrighted to or sublicensable by the Licensor, and this Agreement provides for the terms and conditions shall belong to the Licensor or the original holder of the right who granted to the Licensor the license or which Users shall follow in order to use the Licensed Software.
Page 36
Important Notice concerning the Software Article 9 Destruction of the Licensed Software If this Agreement is terminated pursuant to the provision of Article 8, the User shall destroy the Licensed -jansson Software, any related documents and copies thereof within two (2) weeks from such date of termination. Copyright (c) 2009-2012 Petri Lehtinen <petri@digip.org>...
Page 37
-CMP sha2 AUTHOR: Aaron D. Gifford - http://www.aarongifford.com/ The MIT License (MIT) Copyright (c) 2014 Charles Gunyon Copyright (c) 2000-2001, Aaron D. Gifford All rights reserved. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without You may obtain a copy of the license at limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the...
Page 38
Copyright (c) 1995, 1996 Carnegie-Mellon University. All rights reserved. T-Kernel 2.0 This product uses the source code of T-Kernel 2.0 under T-License 2.0 granted by T-Engine Forum Author: Chris G. Demetriou (www.tron.org) Permission to use, copy, modify and distribute this software and its documentation is hereby granted, BSD-3-Clause provided that both the copyright notice and this permission notice appear in all copies of the software, Copyright (c) 2000-2001, Aaron D.
Page 39
ﺍﻟﻤﻮﺍﺻﻔﺎﺕ 4 × 05 ﻭﺍﻁ ﻗﺪﺭﺓ ﺍﻟﺨﺮﺝ ﺍﻟﻘﺼﻮﻯ • Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. 4 × 22 ﻭﺍﻁ ﻗﺪﺭﺓ ﺳﻌﺔ ﻧﻄﺎﻕ ﺍﻟﺒﺚ ﺍﻟﻜﺎﻣﻞ • Use of the Made for Apple badge means that an accessory has been designed to connect specifically )ﻋﻨﺪ...