Page 8
Fingerprint reader Trackpad TrackPoint buttons * for selected models ThinkShutter Slide ThinkShutter to cover or uncover the camera lens. It is designed to protect your privacy. X1 Nano Gen 1 User Guide...
Bottom view Emergency-reset hole Speaker Emergency-reset hole If the computer stops responding and you cannot turn it off by pressing the power button, reset your computer: 1. Disconnect your computer from ac power. 2. Insert a straightened paper clip into the hole to cut off power supply temporarily. 3.
* for selected models Specifications For detailed specifications of your computer, go to https://psref.lenovo.com. USB specifications Note: Depending on the model, some USB connectors might not be available on your computer. Description Connector name Connect USB-compatible devices, such as a USB keyboard, USB mouse, USB storage device, or USB printer.
Page 12
USB device Data rate (Gbit/s) Thunderbolt 3 connector (USB-C) Thunderbolt 4 connector (USB-C) X1 Nano Gen 1 User Guide...
2. Select a network available for connection. Provide required information, if needed. Airplane mode When the Airplane mode is enabled, all wireless features are disabled. To enable or disable the Airplane mode: 1. Use the system menu drop down (top right) and choose Settings. 2.
Fn+K Scroll contents Pause operation Fn+P Send system request Fn+S Enter sleep mode Fn+4 To wake up the computer, press Fn or the power button. Fn+Left arrow key Go to beginning Fn+Right arrow key Go to end Use the TrackPoint pointing device The TrackPoint pointing device enables you to perform all the functions of a traditional mouse, such as pointing, clicking, and scrolling.
Replace the pointing-stick nonslip cap Note: Ensure that the new cap has grooves Use the trackpad The entire trackpad surface is sensitive to finger touch and movement. You can use the trackpad to perform all the pointing, clicking, and scrolling functions of a traditional mouse. Tap on the surface of the trackpad with one finger to perform the left-click action, with two fingers to perform the right-click action.
Two-finger zoom out Put two fingers on the trackpad and move them closer together to zoom out. Two-finger zoom in Put two fingers on the trackpad and move them farther apart to zoom Notes: • When using two or more fingers, ensure that you position your fingers slightly apart. •...
Tap and hold Open a shortcut menu. Slide Scroll through items, such as lists, pages, and photos. Drag an item to the location you want Move an object. Move two fingers closer together Zoom out. Move two fingers farther apart Zoom in.
Page 19
Connect to a wired display 1. Connect the external display to an appropriate video connector on your computer. 2. Connect the external display to an electrical outlet. 3. Turn on the external display. If your computer cannot detect the external display, right-click a blank area on the desktop, and then click Display settings.
• Press Fn+H to switch to performance mode. Use the P-to-P 2.0 charging function Both Thunderbolt 4 connectors (USB-C) on the computer feature the Lenovo-unique P-to-P 2.0 charging function. To use the function, ensure that Charge in Battery Mode is enabled in UEFI BIOS of your computers, so that the function works even when the computers are off or in hibernation mode.
Purchase options Lenovo has a number of hardware accessories and upgrades to help expand the capabilities of your computer. Options include memory modules, storage devices, network cards, port replicators or docking stations, batteries, power adapters, keyboards, mice, and more.
The system management password can also protect the system information stored in UEFI BIOS like a supervisor password, but it has lower authority by default. The system management password can be set through the UEFI BIOS menu or through Windows Management Instrumentation (WMI) with the Lenovo client-management interface.
Page 25
5. In the Changes have been saved window, press Enter. 6. Press F10 to save changes and exit the UEFI BIOS menu. • If you have not set a supervisor password, contact a Lenovo authorized service provider to have the power-on password removed.
However, there is no guarantee that all data is saved in any situation. To check the type of your M.2 solid-state drive: 1. Restart the computer. When the logo screen is displayed, press F10 to enter the Lenovo diagnostics window.
Download and install the latest UEFI BIOS update package by one of the following methods: • Use the fwupdmgr or software utility to check LVFS for firmware updates. • Go to https://pcsupport.lenovo.com and select the entry for your computer. Then, follow the on-screen instructions to download and install the latest UEFI BIOS update package.
If you intend on installing a CRU, Lenovo will ship the CRU to you. CRU information and replacement instructions are shipped with your product and are available from Lenovo at any time upon request. You might be required to return the defective part that is replaced by the CRU.
Base cover assembly Prerequisite Before you start, read Generic Safety and Compliance Notices and print the following instructions. Note: Do not remove the base cover assembly when your computer is connected to ac power. For access, do the following: 1. Disable the built-in battery. See “Disable the built-in battery” on page 23. 2.
Troubleshooting If the computer does not start up after you reinstall the base cover assembly, disconnect the ac power adapter and then reconnect it to the computer. 2242 M.2 solid-state drive Prerequisite Before you start, read Generic Safety and Compliance Notices and print the following instructions. The M.2 solid-state drive is sensitive.
Page 32
Installation procedure Note: Install the M.2 solid-state drive bracket in the orientation as shown. X1 Nano Gen 1 User Guide...
Error messages If you see a message that is not included in the following table, record the error message first, then shut down the computer and call Lenovo for help. See “Lenovo Customer Support Center” on page 32. Message Solution The computer turned off because the battery power is low.
Beep errors Lenovo SmartBeep technology enables you to decode beep errors with your smartphone when a black screen occurs with beeps from your computer. To decode the beep error with Lenovo SmartBeep technology: 1. Go to or scan the following QR Code.
The LLW also is preinstalled on the computer. To access the LLW, go to /opt/Lenovo If you cannot view the LLW either from the Web site or from your computer, contact your local Lenovo office or reseller to obtain a printed version of the LLW.
General Public License and/or the Lesser General Public License (or any other license requiring us to make a written offer to provide corresponding source code to you) from Lenovo for a period of three years without charge except for the cost of media, shipping, and handling, upon written request to Lenovo. This offer is valid to anyone in receipt of this Device.
• Lenovo hardware repair - If the problem is determined to be caused by Lenovo hardware under warranty, trained service personnel are available to provide the applicable level of service.
• https://pcsupport.lenovo.com/warrantylookup Purchase additional services During and after the warranty period, you can purchase additional services from Lenovo at https:// www.lenovo.com/services Service availability and service name might vary by country or region. Chapter 7 Help and support...
Page 42
Many product solutions are available to help you modify and expand your computer to best suit your needs. You can find some of these options at https://www.lenovo.com/accessories Explore your options for docking solutions and external products that provide the adjustability and features that you want.
Certification-related information Product name Compliance ID Machine types • ThinkPad X1 Nano Gen 1 • ThinkPad X1 Nano Gen 1 LTE TP00123A 20UN and 20UQ (for mainland China only) • ThinkPad X1 Nano Gen 1 5G (for mainland China only) The latest compliance information is available at: https://www.lenovo.com/compliance...
Page 44
Federal Communications Commission (FCC) Supplier’s Declaration of Conformity The following information refers to ThinkPad X1 Nano Gen 1, machine types: 20UN and 20UQ. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Page 45
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Responsible Party: Lenovo (United States) Incorporated 7001 Development Drive Morrisville, NC 27560 Email: FCC@lenovo.com Korea SAR statement 무선설비...
Page 46
• Through an electronic-label screen (E-label screen) preinstalled on your computer To access the E-label screen, restart the computer. When the logo screen is displayed, press F9, or tap the prompt to enter the Startup Interrupt menu and the Regulatory Information option subsequently. Korean E-label notice X1 Nano Gen 1 User Guide...
Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any Lenovo intellectual property right may be used instead.
Page 48
Furthermore, some measurements may have been estimated through extrapolation. Actual results may vary. Users of this document should verify the applicable data for their specific environment. This document is copyrighted by Lenovo and is not covered by any open source license, including any ® Linux agreement(s) which may accompany software included with this product.