Sony STR-DA3400ES Operating Instructions Manual page 100
Multi channel av receiver
Hide thumbs
Also See for STR-DA3400ES:
- Manual (272 pages) ,
- Operating instructions manual (128 pages) ,
- Quick setup manual (2 pages)
Table of Contents
Advertisement
Name
Function
J D.RANGE
Lights up when dynamic range
compression is activated.
K CAT
Lights up when category mode
is selected during the satellite
radio operation.
L Tuner
Lights up when using the
indicators
receiver to tune in radio
stations, etc.
M SP A/SP B/
Lights up according to the
SP A+B
speaker system used (page 43).
However, these indicators do
not light up if the speaker
output is turned off or if
headphones are connected.
N SLEEP
Lights up when the sleep timer
is activated.
O ZONE 2
Lights up while operation in
Zone 2 is being enabled.
P A.DIRECT
Lights up when the receiver is
processing Analog Direct
signals.
Q SIRIUS
Lights up when the
SiriusConnect Home tuner is
connected and "SIRIUS" is
selected.
R MEM
Lights up when a memory
function, such as Preset
Memory, etc., is activated.
S XM
Lights up when XM Mini
Tuner and Home Dock are
connected and "XM RADIO"
is selected.
T ; PL/
"; PL" lights up when the
; PL II/
receiver applies Dolby Pro
; PL IIx
Logic processing to 2 channel
signals in order to output the
center and surround channel
signals.
"; PL II" lights up when the
Dolby Pro Logic II decoder is
activated.
"; PL IIx" lights up when the
Dolby Pro Logic IIx decoder is
activated.
However, these indicators do
not light up if there are no
center and surround speakers
and you select a sound field
using the A.F.D. button.
100
US
Name
Function
U BI-AMP
Lights up when "Sur Back
Assign" is set to "BI-AMP".
V EQ
Lights up when the equalizer is
activated.
W LPCM
Lights up when Linear PCM
signals are detected.
X ANALOG
Lights up when
– INPUT MODE is set to
– INPUT MODE is set to
– the "2ch Analog Direct" is
Y DMPORT
Lights up when DIGITAL
MEDIA PORT adapter is
connected and "DMPORT" is
selected.
Z MULTI IN
Lights up when multi channel
input is selected.
wj HDMI
Lights up when the receiver
recognizes a component
connected via an HDMI IN
jack.
"AUTO" and no digital signal
is being input through the
COAXIAL, OPTICAL or
HDMI jacks.
"ANALOG".
being used.
Advertisement
Table of Contents
