hit counter script

Sony STR-DA3400ES Operating Instructions Manual page 34

Multi channel av receiver
Hide thumbs Also See for STR-DA3400ES:
Table of Contents

Advertisement

Notes on converting video signals
• When video signals from a VCR, etc., are
converted on this receiver and then output to
your TV, depending on the status of the
video signal output, the image on the TV
screen may appear distorted horizontally or
no image may be output.
• HDMI video signals cannot be converted to
component video signals and video signals.
• The converted video signals are output only
from the MONITOR OUT jacks. They are
not output from the VIDEO OUT jacks or
the ZONE 2 VIDEO OUT jack.
• When you play a VCR with an image
improvement circuit, such as Time Base
Corrector (TBC), the images may be
distorted or may not be output. In this case,
set the image improvement circuit function
to off.
• The resolution of the signals output to the
COMPONENT VIDEO MONITOR OUT
jacks is converted up to 1080i. The
resolution of the signals output to the HDMI
OUT jack is converted up to 1080p.
• COMPONENT VIDEO MONITOR OUT
jacks have restrictions on resolution when
the resolution of video signals protected by
copyright technology is converted.
Resolution of up to 480p can be output to the
COMPONENT VIDEO MONITOR OUT
jacks. The HDMI OUT jack has no
restriction on resolution.
• Video signals for which the resolution has
been converted can be output from either the
COMPONENT VIDEO MONITOR OUT
jacks or the HDMI OUT jack. The video
signals are output from the HDMI OUT jack
when both are connected.
• Set "Resolution" to "AUTO" or "480i/576i"
in the Video settings menu to output the
video signals from the MONITOR VIDEO
OUT or COMPONENT VIDEO MONITOR
OUT jack when both are connected.
34
US
To display Closed Caption
Set "Resolution" to "DIRECT" in the Video
settings menu when receiving a signal that
supports Closed Captions.
Use the same kind of cords for the input/output
signals.

Advertisement

Table of Contents
loading

Table of Contents