Table of Contents
Advertisement
Reagents, SHEATH / RINSE, Wash, and DEFOAMER
Reagent
Sheath
ensuring cell-by-cell analysis.
Rinse
prevent carryover and ensure the integrity of the results.
Wash
should be performed periodically: once a day or after a set number of samples.
DEFOAMER
Wash, PEROX SHEATH, DEFOAMER, and all cytochemical reagents are
located on the analyzer and, except for the SHEATH / RINSE and DEFOAMER,
they are monitored on a cycle-by-cycle basis.
The SHEATH / RINSE is in a CUBITAINER
Vacuum and Pressure Regulator Knobs
Vacuum Regulator
Pressure Regulator
Touchpad
On
The touchpad, located on the lower right of the analyzer, is the means by which
you operate the analyzer.
On –
Provides power to the analyzer assemblies and power supplies. After
pressed, samples through the manual open- and closed-tube samplers can be
processed within 2.5 minutes, while samples through the autosampler can begin
processing within four minutes.
Standby –
1-12
is mixed with a sample for cytochemical analysis and measurement.
is a fluid that envelops the sample stream as it passes through the optics,
cleans the hydraulic pathways and reaction chambers after each sample to
solution removes buildup in the hydraulic pathways. A system wash
reduces foam buildup in the waste container.
20 In.-Hg
Knob
40 PSI
Knob
Start/Stop
Standby
Sampler
Sets the analyzer to a lower power state. To exit, press
®
placed on the floor.
5 PSI
Pressure Regulator
Knob
20 PSI
Pressure Regulator
Knob
Eject
Rack
Rack
in Sampler
Welcome to the ADVIA 2120/2120i Hematology System
Off
On
is
.
Standby
Advertisement
Chapters
Table of Contents
Troubleshooting
