Table of Contents
Advertisement
8.9.
Remove the SS2-Board
1. Disconnect the Side terminal cover and the Shield metals
(See section 8.4.).
2. Remove the SS-Board (See section 8.8.).
3. Disconnect the flexible cable (SS66).
4. Remove the screws (×2
8.10. Remove the Fan
1. Unlock the cable clampers to free the cable.
2. Remove the screws (×3
3. Remove the Relay connector and remove the Fan.
) and remove the SS2-Board.
).
8.11. Remove the Speakers
1. Unlock the cable clampers to free the cable.
2. Disconnect the Relay connector.
3. Remove the screws (×2
ers (L, R).
8.12. Remove the Stand bracket
1. Remove the Plasma panel section from the servicing
stand and lay on a flat surface such as a table (covered
by a soft cloth) with the Plasma panel surface facing
downward.
2. Unlock the cable clampers to free cable.
3. Remove the Stand bracket fastening screws (×9
the Stand bracket.
8.13. Remove the S-Board
1. Remove the screws (×2
unit.
2. Remove the screws (×2
3. Disconnect the connector (S10) and remove the S-Board
from the Power button bracket.
24
each) and remove the Speak-
) and
) and remove the S-Board
).
- Quick Links:
- Power Led Blinking Timing Chart
Hide quick links:
Advertisement
Table of Contents
