Advertisement
Quick Links
We thank you for choosing an Australian made shed. For further assistance please
visit our detailed instructional video library at
Http://www.abscosheds.com.au/watch-videos
At ABSCO Industries we are always looking to be number ONE, so please let us
know what you think of our instructions. Feedback makes us better.
feedback@absco.com.au
ABSCO INDUSTRIES
Absco Premier Garden Shed
Assembly Instructions
Model: 30152GK
ASSEMBLY INSTRUCTION - MODEL: 30152GK 13/04/16
WHEN LAYING YOUR CONCRETE
SLAB, ENSURE THERE IS A REBATED
EDGE 25mm DEEP AROUND THE PERIMETER
CHANNEL
THIS WILL HELP
REBATED EDGE
WATER EGRESS FROM
THE BASE OF THE SHED
CONCRETE SLAB
FRONT: 3.0m
SIDE:
1.52m
HEIGHT: 1.95m
75mm WIDE
REBATE
PAGE 1
Advertisement
Related Manuals for ABSCO SHEDS 30152GK
Summary of Contents for ABSCO SHEDS 30152GK
- Page 1 Http://www.abscosheds.com.au/watch-videos At ABSCO Industries we are always looking to be number ONE, so please let us know what you think of our instructions. Feedback makes us better. feedback@absco.com.au ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 30152GK 13/04/16 PAGE 1...
-
Page 2: General Instructions
Do not erect your shed in windy conditions, ensure that the shed is securely anchored to a solid foundation immediately after construction is completed. · It is highly recommended to erect the shed with two or more people. ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 30152GK 13/04/16 PAGE 2... - Page 3 STEEL SHEET 1725mm X 773mm CHANNEL L = 767mm ALL SHEETS HAVE PART NO.S LOCATED ON Part No. Here LOWER RIGHT OR UPPER LEFT CORNER OF COLORED SIDE AS SHOWN ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 30152GK 13/04/16 PAGE 3...
- Page 4 CHANNEL CHANNEL L = 1496.5mm L = 1496.5mm 81BL 81BR CHANNEL CHANNEL L = 1496.5mm L = 1496.5mm RIDGE RIDGE 97AL 97AR BEAM BEAM L = 1521mm L = 1521mm ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 30152GK 13/04/16 PAGE 4...
- Page 5 3mm (0.12") DRILL BIT PADBOLTS TO DOOR SHEET 4mm CSK SCREW & HEX TEK SCREW NUT SECURE HINGES DRIVER BIT TO DOOR SELF DRILLING HEX ASSEMBLY HEAD TEK SCREWS (NO INSTRUCTIONS HOLE REQUIRED) ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 30152GK 13/04/16 PAGE 5...
- Page 6 CSJ positioned equally inside of the joined channels. (on an angle). Push the CSJ into the channel until you here a 'click'. CHANNEL HIGH-SIDE LOW-SIDE 20mm (0.79") 15mm (0.59") CHANNEL ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 30152GK 13/04/16 PAGE 6...
- Page 7 2 X 60AL 1 x 81B 1 X 55AR 1 X 55AL 1 X 55CR 1 X 55CL 1 X 55BR 1 X 55BL 1 X 81BR 1 X 81BL ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 30152GK 13/04/16 PAGE 7...
- Page 8 STAGE 3: TURN RIDGE CAP OVER AND MEASURE 250mm FROM THE END OF EACH RIDGE CAP. PLACE TEK SCREWS IN 50mm INCREMENTS FROM SAID END. REPEAT THIS PROCESS FOR THE OPPOSING HALF OF RIDGE BEAM ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 30152GK 13/04/16 PAGE 8...
- Page 9 QTY. = 2 PARTS 97AL & 97AR QTY. = 1 PART ZARSP - 450mm (17.7") LONG ZARSP THE TOP SECTIONS OF CAPPING WILL OVERLAP EACH OTHER AT THE JOIN BY 50mm (2.0"). ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 30152GK 13/04/16 PAGE 9...
- Page 12 Do not join components together at this location yet, as the screw may obstruct further assembly of other components ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 30152GK 13/04/16 PAGE 12...
-
Page 13: Rear Panel Assembly
2. SIDE PANEL ASSEMBLY (2 Required) TRIM THE TIP OF EACH SHEET OR BEND OUT OF THE WAY TO ALLOW CHANNELS TO FIT HARD UP TO THE EDGE OF THE SHEET ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 30152GK 13/04/16 PAGE 13... - Page 14 Premier Garden Shed INSTRUCTIONS AND VIDEOS Model: 30152GK 3. ROOF PANEL ASSEMBLY (2 Required) 2 x PRE-PUNCHED HOLES TO THIS END OF EACH SHEET WITH PART NO. 81A FITTED ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 30152GK 13/04/16 PAGE 14...
-
Page 15: Front Panel Assembly
Premier Garden Shed INSTRUCTIONS AND VIDEOS Model: 30152GK 4. FRONT PANEL ASSEMBLY ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 30152GK 13/04/16 PAGE 15... -
Page 16: Door Panel Assembly
Model: 30152GK DOOR PANEL ASSEMBLY ALL VERTICAL DOOR CHANNELS ARE INSTALLED IN THE REVERSE DIRECTION IN COMPARISON TO HORIZONTAL DOOR CHANNELS 20mm FLANGE 15mm FLANGE FOUR HOLE SET FOR PADBOLT CONNECTION ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 30152GK 13/04/16 PAGE 16... - Page 17 If necessary a 3mm drill bit can be used. speed and the screws will penetrate the sheet metal. If necessary a 3mm drill bit can be used. ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 30152GK 13/04/16 PAGE 17...
- Page 18 SIDE WALL PANEL CHANNELS FIT INTO THE NOTCHED FRONT AND REAR WALL PANEL CHANNELS CHANNEL TYPE 60A THIS END CHANNEL TYPE 81A THIS END ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 30152GK 13/04/16 PAGE 18...
- Page 19 BEAM AND ROOF SCREW AT EACH PANEL WITH ONE SCREW AT EACH END SLIDE THE ROOF PANEL INTO POSITION, AND SECURE WITH ONE SCREW AT EACH CORNER ONLY AT THIS STAGE ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 30152GK 13/04/16 PAGE 19...
- Page 20 - EACH ANCHOR CONSISTS OF ONE NUT, BOLT, DYNABOLT AND STEEL ANGLE SLAB - DRILL A 10mm HOLE INTO THE WALL SHEET DYNABOLT - DRILL A 10mm HOLE INTO THE CONCRETE ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 30152GK 13/04/16 PAGE 20...
- Page 21 DEFECTS Congratulations on your purchase of an ABSCO SHED ABSCO SHEDS, including garden sheds, garden beds, aviaries, storage units, garages, awnings and carports are made using high quality Australian made steel. We are pleased to advise we warrant that the steel coating will not rust, crack, flake peel or blister for 20 years from date of purchase, when installed within Australia.
- Page 22 ABSCO SHEDS and storage units are primarily used for storage of garden equipment such as lawnmowers, wheelbarrows, garden tools etc. Storage...