Advertisement
Quick Links
We thank you for choosing an Australian Made Shed. For further assistance please
visit our detailed instructional video library at
Http://www.abscosheds.com.au/watch-videos
At ABSCO Industries we are always looking to be number ONE, so please let us
know what you think of our instructions. Feedback makes us better.
feedback@absco.com.au
ABSCO INDUSTRIES
Absco Premier Garden Shed
Assembly Instructions
Model: 30232G
ASSEMBLY INSTRUCTION - MODEL: 30232G 05/09/14
WHEN LAYING YOUR CONCRETE
SLAB, ENSURE THERE IS A REBATED
EDGE 25mm DEEP AROUND THE PERIMETER
CHANNEL
THIS WILL HELP
REBATED EDGE
WATER EGRESS FROM
THE BASE OF THE SHED
CONCRETE SLAB
FRONT: 3.00m
SIDE:
2.26m
HEIGHT: 2.00m
75mm WIDE
REBATE
PAGE 1
Advertisement
Related Manuals for ABSCO SHEDS 30232G
Summary of Contents for ABSCO SHEDS 30232G
- Page 1 Http://www.abscosheds.com.au/watch-videos At ABSCO Industries we are always looking to be number ONE, so please let us know what you think of our instructions. Feedback makes us better. feedback@absco.com.au ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 30232G 05/09/14 PAGE 1...
- Page 2 Do not erect your shed in windy conditions, ensure that the shed is securely anchored to a solid foundation immediately after construction is completed. It is highly recommended to erect the shed with two or more people. ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 30232G 05/09/14 PAGE 2...
- Page 3 L = 2993mm ALL SHEETS HAVE PART NO.S Part No. Here LOCATED ON CHANNEL WITH HINGES LOWER RIGHT OR UPPER LEFT L = 1725mm CORNER OF COLORED SIDE AS SHOWN ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 30232G 05/09/14 PAGE 3...
- Page 4 SHEET 3mm POP RIVETS SECURE 4mm CSK SCREW & HINGES TO DOOR NUT SECURE HINGES (ALTERNATIVE FIXING TO DOOR METHOD) DOOR ASSEMBLY STRAP INSTRUCTIONS L: 165mm CAP GABLE L: 170mm ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 30232G 05/09/14 PAGE 4...
- Page 7 Do not join components together at this location yet, as the screw may obstruct further assembly of other components ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 30232G 05/09/14 PAGE 7...
- Page 8 Premier Garden Shed - INSTRUCTIONS Model: 30232G AND VIDEOS 1. REAR PANEL ASSEMBLY 2. SIDE PANEL ASSEMBLY (2 Required) ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 30232G 05/09/14 PAGE 9...
- Page 9 Premier Garden Shed - INSTRUCTIONS Model: 30232G AND VIDEOS 3. ROOF PANEL ASSEMBLY (2 Required) 2 x PRE-PUNCHED HOLES TO THIS END OF EACH SHEET WITH PART NO. 81A FITTED ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 30232G 05/09/14 PAGE 10...
-
Page 10: Front Panel Assembly
Premier Garden Shed - INSTRUCTIONS Model: 30232G AND VIDEOS 4. FRONT PANEL ASSEMBLY ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 30232G 05/09/14 PAGE 11... - Page 11 AND VIDEOS DOOR PANEL ASSEMBLY ALL VERTICAL DOOR CHANNELS ARE INSTALLED IN THE REVERSE DIRECTION IN COMPARISON TO HORIZONTAL DOOR CHANNELS 20mm FLANGE 15mm FLANGE FOUR HOLE SET FOR PADBOLT CONNECTION ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 30232G 05/09/14 PAGE 8...
- Page 12 If necessary a 3mm drill bit can be used. ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 30232G 05/09/14 PAGE 12...
- Page 13 SIDE WALL PANEL CHANNELS FIT INTO THE NOTCHED FRONT AND REAR WALL PANEL CHANNELS CHANNEL TYPE 60A THIS END CHANNEL TYPE 81A THIS END ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 30232G 05/09/14 PAGE 13...
- Page 14 SCREW AT EACH BEAM AND ROOF PANEL WITH ONE SCREW AT EACH END SLIDE THE ROOF PANEL INTO POSITION, AND SECURE WITH ONE SCREW AT EACH CORNER ONLY AT THIS STAGE ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 30232G 05/09/14 PAGE 14...
- Page 15 - EACH ANCHOR CONSISTS OF ONE NUT, BOLT, DYNABOLT AND STEEL ANGLE STEEL ANGLE - DRILL A 10mm HOLE INTO THE WALL SHEET SLAB - DRILL A 10mm HOLE INTO THE CONCRETE DYNABOLT ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 30232G 05/09/14 PAGE 15...
- Page 16 DEFECTS Congratulations on your purchase of an ABSCO SHED ABSCO SHEDS, including garden sheds, garden beds, aviaries, storage units, garages, awnings and carports are made using high quality Australian made steel. We are pleased to advise we warrant that the steel coating will not rust, crack, flake peel or blister for 30 years from date of purchase, when installed within Australia.
- Page 17 ABSCO SHEDS and storage units are primarily used for storage of garden equipment such as lawnmowers, wheelbarrows, garden tools etc. Storage...