hit counter script
Download
Share
Print this page
  1. Manuals
  2. Brands
  3. ABSCO SHEDS Manuals
  4. Outdoor Storage
  5. 3060HK
  6. Manual

ABSCO SHEDS 3060HK Manual

Hide thumbs Also See for 3060HK:

Advertisement

Quick Links

Download this manual
FOR CONSTRUCTION IN
NON-CYCLONIC AREAS
WIND RATING: W33N (N2)
We thank you for choosing an Australian made shed. For further assistance please
visit our detailed instructional video library at
Http://www.abscosheds.com.au/watch-videos
At ABSCO Industries we are always looking to be number ONE, so please let us
know what you think of our instructions. Feedback makes us better.
feedback@absco.com.au
ABSCO INDUSTRIES
Absco Highlander Shed
Model: 3060HK
WHEN LAYING YOUR CONCRETE
SLAB, ENSURE THERE IS A REBATED
EDGE 25mm DEEP AROUND THE PERIMETER
CHANNEL
REBATED EDGE
CONCRETE SLAB
ASSEMBLY INSTRUCTION - MODEL: 3060HK 04/07/16
THIS WILL HELP
WATER EGRESS FROM
THE BASE OF THE SHED
75mm WIDE
REBATE
日本改定日2021/4/28
FRONT: 5.96m
SIDE:
3.00m
HEIGHT: 2.3m
Page 1

Advertisement

loading

Related Manuals for ABSCO SHEDS 3060HK

Summary of Contents for ABSCO SHEDS 3060HK

  • Page 1 Http://www.abscosheds.com.au/watch-videos At ABSCO Industries we are always looking to be number ONE, so please let us know what you think of our instructions. Feedback makes us better. feedback@absco.com.au ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 3060HK 04/07/16 Page 1...

  • Page 2: General Instructions

    ・ Do not erect your shed in windy conditions, ensure that the shed is securely anchored to a solid foundation immediately after construction is completed. ・ It is highly recommended to erect the shed with two or more people. ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 3060HK 04/07/16 Page 2...
  • Page 3 ・ Discard the middle piece as scrap when convenient. Fold the scrap piece in half 2-3 times and throw in bin. CHECK SHEET FOLD FIRST FOLD MIDDLE DISCARD MIDDLE SECTION OF SECTION OF PIECE PERFORATIONS SHEET UNTIL SHEET UNTIL FREE FREE ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 3060HK 04/07/16 PAGE 3...
  • Page 4 PACKET (SEE PAGES 6 & 7) PACKET (SEE PAGES 4 & 5) ALL SHEETS HAVE PART NO.S LOCATED ON Part No. Here LOWER RIGHT OR UPPER LEFT CORNER OF COLORED SIDE AS SHOWN ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 3060HK 04/07/16 PAGE 4...
  • Page 5 77CL 77CR CHANNEL CHANNEL L = 1496.5mm L = 1496.5mm 81AL 81AR CHANNEL CHANNEL L = 1496.5mm L = 1496.5mm 81BL 81BR CHANNEL CHANNEL L = 1496.5mm L = 1496.5mm ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 3060HK 04/07/16 PAGE 5...
  • Page 6 Part No. Here CHANNEL WITH HINGES JAMB L= 2034mm L = 1974mm Part No. Here CHANNEL JAMB L= 2034mm L = 1974mm Part No. Here JAMB L= 1974mm LIP TRIM L= 1546mm ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 3060HK 04/07/16 PAGE 6...
  • Page 7 DOUBLE DOOR KIT PACKET CONTENTS DOOR PADBOLT DOOR HASP PADBOLT 3/16 ROUND HEAD SELF TAPPING SCREWS BOLTS & NYLOCK NUTS PACKET CONTAINING 220 3/16 COUNTERSUNK 3.2 x 8mm SCREWS & NUTS BLIND POP RIVETS ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 3060HK 04/07/16 PAGE 7...
  • Page 8 CHANNEL L = 1954mm HIGH-PORTAL PACK STEEL SHEET (SEE BELOW) 2034mm X 773mm C1482 CHANNEL L = 1482mm HIGH-PORTAL FRAME ACCESSORIES KNEE PLATE 10mm DYNABOLT 16mm TEK SCREWS APEX PLATE MULTI PURPOSE BRACKET ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 3060HK 04/07/16 PAGE 8...
  • Page 9 CHANNEL L = 2034mm CHANNEL L = 100mm M1484 CHANNEL L = 1484mm SMALL TRIANGULAR HAT= 2290mm PLATE SELF DRILLING 16mm TEK SCREWS HAT= 1350mm MULTI PURPOSE 10mm BRACKET DYNABOLTS ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 3060HK 04/07/16 PAGE 9...
  • Page 10 CSJ positioned equally inside of the joined channels. (on an angle). Push the CSJ into the channel until you here a 'click'. CHANNEL HIGH-SIDE LOW-SIDE 20mm (0.79") 15mm (0.59") CHANNEL ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 3060HK 04/07/16 PAGE 10...
  • Page 11 3 X 55BL 3 x 81B 1 X 56AR 1 X 56AL 1 X 56BR 1 X 56BL 1 X 77BR 1 X 77BL 3 X 81BR 3 X 81BL ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 3060HK 04/07/16 PAGE 11...
  • Page 12 STAGE 3: TURN RIDGE CAP OVER AND MEASURE 250mm FROM THE END OF EACH RIDGE CAP. PLACE TEK SCREWS IN 50mm INCREMENTS FROM SAID END. REPEAT THIS PROCESS FOR THE OPPOSING HALF OF RIDGE BEAM ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 3060HK 04/07/16 PAGE 12...
  • Page 13 QTY. = 2 PARTS 97AL & 97AR QTY. = 1 PART ZARSP - 450mm (17.7") LONG ZARSP THE TOP SECTIONS OF CAPPING WILL OVERLAP EACH OTHER AT THE JOIN BY 50mm (2.0"). ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 3060HK 04/07/16 PAGE 13...
  • Page 16 SELF DRILLING TEK SCREW shed FOR JOINING FRONT AND Do not join components together at this location yet, CENTRE FRAME COMPONENTS as the screw may obstruct further assembly of other components ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 3060HK 04/07/16 PAGE 16...
  • Page 17 SECURE WITH SELF DRILLING SCREWS AS SHOWN. RIDGE BEAM SPLICE (PART RBS) QTY. = 1 (VERY TIGHT FIT, USE A HAMMER TO TAP INTO POSITION) SECURE THE CAP JOINER (PART 98A) AS SHOWN ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 3060HK 04/07/16 PAGE 17...
  • Page 18 = 2976.5 TWO PANELS JOINED: 2976.5 X 2 = 5953mm IT IS NOT CRITICAL THAT THE OVERALL LENGTH OF 5953mm IS EXACT, BUT TRY AND MAINTAIN THE LENGTH WITHIN 5mm. ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 3060HK 04/07/16 PAGE 18...
  • Page 19 1. END PANEL ASSEMBLY OUTSIDE OF SHED TURN THE PANEL OVER. FIT THE TWO LARGE GABLES (16L & 16R) TO THE INSIDE FACE OF THE TOP CHANNEL (77B) INSIDE OF SHED ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 3060HK 04/07/16 PAGE 19...
  • Page 20 NOTE: BE CAREFUL WITH CHANNEL ORIENTATION. THESE PANELS MUST JOIN TOGETHER AS PER PAGE 20. ENSURE THAT 55B & 81B MATCH TO THEIR CORRESPONDING CHANNELS WHEN CONNECTING TO CORRESPONDING PANEL SECTIONS. ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 3060HK 04/07/16 PAGE 20...
  • Page 21 No. 81A FITTED NOTE: TWO ROOF PANEL SECTIONS WILL HAVE PART (87A) FITTED TO THIS END ONLY ONCE COMPLETED THERE WILL BE 4 SECTIONS WITH 87A LIP AT ONE END ONLY. ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 3060HK 04/07/16 PAGE 21...
  • Page 22 3mm DRILL BIT USING THE NOTE: FIT ONE PRE-PUNCHED DOOR WITH A COMPONENTS CHANNEL SHOWN AS (PART HC2) TEMPLATES. FIT THE OTHER DOOR WITH A JAMB (PART HJ3) 20mm FLANGE 15mm FLANGE ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 3060HK 04/07/16 PAGE 22...
  • Page 23 Absco Highlander Shed INSTRUCTIONS Model: 3060HK AND VIDEOS 5. SIDE PANEL ASSEMBLY SINGLE DOOR ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 3060HK 04/07/16 PAGE 23...
  • Page 24 If necessary a 3mm drill bit can be used. ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 3060HK 04/07/16 PAGE 24...
  • Page 25 NOTE: IF YOU HAVE AN EDGE REBATE IN YOUR CONCRETE SLAB, YOU WILL HAVE TO CUT AN AMOUNT OFF THE BOTTOM OF THE FRAME LEGS EQUAL TO THE DEPTH OF THE REBATE. ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 3060HK 04/07/16 PAGE 25...
  • Page 26 AND VIDEOS 7. HIGH-PORTAL FRAME ASSEMBLY x 19 SECURE RIDGE x 24 PLATES TO APEX PLATES HIGHPORTAL TO PANEL CONSTRUCTION (REFER: PANEL CONSTRUCTION) SELF DRILLING TEK SCREW WALL/ROOF PANEL HIGHPORTAL ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 3060HK 04/07/16 PAGE 26...
  • Page 27 REFER TO PAGE 7 FOR FRONT FRAME PARTS AND ACCESSORIES TRIANGULAR PLATE M1484 C0240 C2034 RIDGE PLATE MULTI PURPOSE BRACKETS K0285 C2300 N2070 REFER TO THE FOLLOWING PAGE FOR FURTHER DETAILS. C0100 ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 3060HK 04/07/16 PAGE 27...
  • Page 28 NOTE: IF YOU HAVE AN EDGE REBATE IN YOUR CONCRETE SLAB, YOU WILL HAVE TO CUT AN AMOUNT OFF THE BOTTOM OF THE FRAME LEGS EQUAL TO THE DEPTH OF THE REBATE. ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 3060HK 04/07/16 PAGE 28...

  • Page 29: Front Panel Assembly

    OUTER EDGE OF THE FRONT FRAME FOR CORNER LAPPING OF SIDE WALL PANELS. (FIG. B) RIGHT HAND FRONT FRAME LEFT HAND FRONT FRAME FIG. A FIG. A FIG. B FIG. B ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 3060HK 04/07/16 PAGE 29...
  • Page 30 - SECURE MULTI PURPOSE BRACKETS TO UPRIGHTS USING SELF DRILLING SCREWS - MOVE FRAMES INTO POSITION, MARK AND DRILL HOLES IN SLAB USING 10mm MASONARY DRILL BIT - SECURE FRAMES TO SLAB WITH DYNABOLTS ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 3060HK 04/07/16 PAGE 30...
  • Page 31 DRILLING TEK SCREWS TO SECURE WALLS TO INTERNAL FRAMES SIDE WALL PANEL CHANNELS FIT PRE-PUNCHED INTO THE NOTCHED FRONT AND CHANNEL TO REAR WALL PANEL CHANNELS MATCH RIDGE BEAM HOLES. ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 3060HK 04/07/16 PAGE 31...
  • Page 32 REQUIRE PRE-DRILLED HOLES. SECURE EACH RIDGE BEAM TO EACH RIDGE PLATE WITH 4 X 16mm SELF DRILLING TEK SCREWS. -WARNING- DO NOT CLIMB ON TO OR WALK ON THE ROOF. ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 3060HK 04/07/16 PAGE 32...
  • Page 33 - EACH ANCHOR CONSISTS OF ONE NUT, BOLT, DYNABOLT AND ANGLE STEEL ANGLE - DRILL A 10mm HOLE INTO THE WALL SHEET SLAB - DRILL A 10mm HOLE INTO THE CONCRETE DYNABOLT ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 3060HK 04/07/16 PAGE 33...

  • Page 34: Door Installation

    EACH DOOR AS SHOWN BY FASTENING AT EACH END, THEN DRILLING REMAINDER HOLES FROM THE INSIDE FACE OF EACH DOOR AND SECURING WITH SCREWS FROM THE OUTSIDE FACE OF EACH DOOR. ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 3060HK 04/07/16 PAGE 34...
  • Page 35 Assemble the C0240 & C2300 sections STEP 8A, B, C, D, E: Join all sections together STEP 9A, B: Turn frame over and repeat steps 4 to 8 STEP 10: Fully Assembled front frame ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 3060HK 04/07/16 PAGE 35...
  • Page 36 Absco Highlander Shed INSTRUCTIONS Model: 3060HK AND VIDEOS ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 3060HK 04/07/16 PAGE 36...
  • Page 37 Absco Highlander Shed INSTRUCTIONS Model: 3060HK AND VIDEOS ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 3060HK 04/07/16 PAGE 37...
  • Page 38 Absco Highlander Shed INSTRUCTIONS Model: 3060HK AND VIDEOS ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 3060HK 04/07/16 PAGE 38...
  • Page 39 Absco Highlander Shed INSTRUCTIONS Model: 3060HK AND VIDEOS ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 3060HK 04/07/16 PAGE 39...
  • Page 40 Absco Highlander Shed INSTRUCTIONS Model: 3060HK AND VIDEOS ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 3060HK 04/07/16 PAGE 40...
  • Page 41 Absco Highlander Shed INSTRUCTIONS Model: 3060HK AND VIDEOS ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 3060HK 04/07/16 PAGE 41...
  • Page 42 Absco Highlander Shed INSTRUCTIONS Model: 3060HK AND VIDEOS ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 3060HK 04/07/16 PAGE 42...
  • Page 43 Absco Highlander Shed INSTRUCTIONS Model: 3060HK AND VIDEOS ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 3060HK 04/07/16 PAGE 43...
  • Page 44 Absco Highlander Shed INSTRUCTIONS Model: 3060HK AND VIDEOS ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 3060HK 04/07/16 PAGE 44...
  • Page 45 Absco Highlander Shed INSTRUCTIONS Model: 3060HK AND VIDEOS ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 3060HK 04/07/16 PAGE 45...
  • Page 46 STEP 4A, B, C: Join C1482 to C1482 STEP 5A, B: Secure ridge plate (RBP) STEP 6A, B: Secure multi purpose brackets STEP 7A, B, C, D: Turn frame over, repeat steps 4,5 ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 3060HK 04/07/16 PAGE 46...
  • Page 47 Absco Highlander Shed INSTRUCTIONS Model: 3060HK AND VIDEOS ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 3060HK 04/07/16 PAGE 47...
  • Page 48 Absco Highlander Shed INSTRUCTIONS Model: 3060HK AND VIDEOS ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 3060HK 04/07/16 PAGE 48...
  • Page 49 Absco Highlander Shed INSTRUCTIONS Model: 3060HK AND VIDEOS ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 3060HK 04/07/16 PAGE 49...
  • Page 50 Absco Highlander Shed INSTRUCTIONS Model: 3060HK AND VIDEOS ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 3060HK 04/07/16 PAGE 50...
  • Page 51 Absco Highlander Shed INSTRUCTIONS Model: 3060HK AND VIDEOS ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 3060HK 04/07/16 PAGE 51...
  • Page 52 Absco Highlander Shed INSTRUCTIONS Model: 3060HK AND VIDEOS ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 3060HK 04/07/16 PAGE 52...
  • Page 53 Absco Highlander Shed INSTRUCTIONS Model: 3060HK AND VIDEOS ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 3060HK 04/07/16 PAGE 53...
  • Page 54 DEFECTS Congratulations on your purchase of an ABSCO SHED ABSCO SHEDS, including garden sheds, garden beds, a viaries, storage units, garages, awnings and carports are made using high quality Au stralian made steel. We are pleased to advise we warrant that the steel coating will not rust, crack, flake peel or blister for 30 years from date of purchase, when installed within Australia.
  • Page 55 floor moisture and/or condensation on the underside of the roof sheets. ABSCO SHEDS and storage units are primarily used for storage of garden equipment such as lawnmowers, wheelbarrows, garden tools etc. Storage...