Rackmount Setup - Dell H955N User Manual

Line-interactive rack ups 5600w

Hide thumbs Also See for H955N:

Table of Contents

Rackmount Setup

CAUTION:

The cabinet is heavy (see page 60): 1) Dell strongly recommends to remove the battery tray from the

UPS before lifting. 2) Lifting the cabinets into the rack requires a minimum of two people.

CAUTION:

Removing the batteries should be performed or supervised by personnel knowledgeable about

batteries and the required precautions. Keep unauthorized personnel away from batteries.

CAUTION:

If installing an optional EBM, install the EBM directly below the UPS.

NOTE:

Mounting rails are required for each individual cabinet.

To install the UPS and optional EBM in a rack:

Remove the internal battery trays from the UPS:

Loosen the thumbscrew on the battery retaining bracket and remove the bracket (see Figure 7).

Figure 7. Removing the Battery Retaining Bracket

Installation

Table of Contents

J731n K812n