Exchanging Exhaust Filters; When To Change The Thread Catcher Pads Of The Standard Floor Brush; Replacing The Thread Catchers; Cleaning And Care - Miele SDAE0 Operating Instructions Manual
Hide thumbs
Also See for SDAE0:
- Operating instructions manual (72 pages) ,
- Operating instructions manual (68 pages) ,
- Operating instructions manual (68 pages)
Table of Contents
Advertisement
Available languages
Available languages
Exchanging exhaust filters
1. If you wish to replace the a AirClean
filter with the b Active AirClean 50 filter
or the c HEPA AirClean 50 filter, you
must remove the filter frame before
inserting the new filter (see fig. 35).
The exhaust filter change indicator
must also be activated (see fig. 13).
2. If you use an AirClean filter a you
must insert it into a filter frame (see fig.
33), see "Optional accessories".
Do not use more than one filter at a
time.
The Active AirClean 50 filter can be
used instead of the HEPA AirClean 50
filter and vice versa without any
changes.
When to change the thread catcher
pads of the standard floor brush
(depending on model)
The thread catcher pads on the bottom
of the standard floor brush (depending
on model) should be checked
occasionally. Replace the pads if they
appear worn.
Replacing the thread catchers (see
fig. 36 + 37)
^ Use a screwdriver or similar object to
remove the thread catchers from the
slots.
^ Insert the new thread catchers.
New thread catcher pads can be
purchased from any authorized Miele
vacuum dealer or Miele.
Cleaning the floor roller of the floor
brush AllTeQ (see fig. 38)
a Unlock the roller pin with a coin.
b Push the pin out and remove it.
c Remove the roller.
^ Remove any threads and hair from
the roller.
^ Replace roller in the reverse order.
Cleaning and care
,
Turn off the vacuum and unplug
it from the outlet before performing
any maintenance work.
Vacuum cleaner and accessories
The vacuum cleaner and other plastic
accessories can be cleaned with a
damp cloth or a cleaner suitable for
plastics.
,
Do not use abrasive, glass or all
purpose cleaners, or oil-based
conditioning agents! They will
damage the surface.
Dust compartment
The dust compartment can, if
necessary, be cleaned using a dry
cloth, dusting brush or a second
vacuum to remove any dust.
Monitor the airflow indicator and
inspect all filters regularly. Clean or
replace them when necessary
according to these Operating
Instructions.
en
17
Advertisement
Chapters
Table of Contents
