3. Re-route the display cable and WLAN antenna cables through the routing channels on the palmrest.
4. Reconnect the display cable to the connector on the system board.
Next steps
1. Install the WLAN.
2. Install the
base
cover.
3. Install the
SD
card.
4. Follow the procedure in
Display bezel
Removing the display bezel
Prerequisites
1. Follow the procedure in
2. Remove the
SD
card.
3. Remove the
base
cover.
4. Remove the
battery
cable.
5. Remove the
display
assembly.
About this task
Steps
1. Pry open the display bezel from the inner edge at the left and right sides of the display assembly.
58
Disassembly and reassembly
after working inside your
before working inside your
computer.
computer.