19C-1E
QUICK REFERENCE GUIDE
This Quick Reference Guide DOES NOT replace the Operators
Manual. You MUST read ALL the disclaimers and safety and other
instructions in the Operators Manual before initially operating this
product. Accordingly, no legal claims can be entertained based on
the data, illustrations or descriptions in this Quick Reference Guide.
Static Dimensions
Tie Down Points
A.
Front undercarriage track leg tie-down points
B.
Rear undercarriage track leg tie-down points
C.
Angle = 25º to 45º
D. Angle = 9º to 15º
E.
Length = 8' 2"
F.
Length = 5' 8" to 3' 4"
G. Length = 8' 2"
H. Slew ring center line
J.
Tie down decal
Cab and Switch Panel
Cab
A.
Track controls
J.
B.
Control Lever
K.
C.
Track extension lever
L.
D. Dozer blade control lever
M. Operator seat
E.
Ignition Switch
N. Control isolation lever
F.
Motor running indicator light
O. Charging cable stowage
G. Rotary hand throttle control
P.
H. Instrument panel
Switch Panel
A.
Control Isolation Switch (2Go)
B.
Aux 1 selection switch
C.
Lift overload on/off switch
D. Work lights on/off switch
E.
Wipers/washer on/off switch
F.
Auto-hydraulic warming switch (not used)
G. H+ mode selection switch (not used)
H. Aux 2 selection switch
J.
Auto idle on/off switch (not used)
K.
Beacon on/off switch
L.
Q-hitch sequence
Lifting Points
A.
Boom Lift Point
B.
Dozer Blade Lift Point
C.
Spreader Bar
D. Centre of Gravity
E.
2' 8"
F.
2' 7"
G. 1' 9"
Revision 1.0
1/11/2021
Instrument Panel
Console switch panel
Auxiliary power socket
Fire extinguisher
A.
Battery Level
indicator gauge
B.
Warning and
indicator lamps
Quickhitch release bar
stowage
Start Up Sequence
Access additional information
www.servicepro.jcb.com