Monitoring Of Power Condition - Toshiba Satellite C660 Series User Manual
Hide thumbs
Also See for Satellite C660 Series:
- User manual (153 pages) ,
- User manual (161 pages) ,
- User manual (158 pages)
Table of Contents
Advertisement
AC adaptor
Remaining
not
battery capacity
connected
is above low
battery trigger
point
Remaining
battery capacity
is below low
battery trigger
point
Remaining
battery capacity
is exhausted
No battery
installed
Monitoring of power condition
As shown in the below table, the DC IN/Battery and Power indicators on
the system indicator alert you to the computer's operating capability and
battery charge status.
DC IN/Battery indicator
Check the DC IN/Battery indicator to determine the status of the battery
pack and the power status with the AC adaptor connected. The following
indicator conditions should be noted:
Green
Amber
Flashing amber
No light
If the battery pack becomes too hot while it is being charged, the charge
will stop and the DC IN/Battery indicator will go out. When the battery
pack's temperature falls to a normal range, charging will resume - this
process will occur regardless of whether the computer's power is on or off.
User's Manual
• Operates
• LED: off
• Operates
• LED: flashes amber
Computer shuts down
No operation
•
• LED: off
Table 6-1 Power conditions
Indicates the AC adaptor is connected while
correctly supplying power to the computer and the
battery is fully charged.
Indicates the AC adaptor is connected and the
battery is charging.
The battery charge is low, the AC adaptor must be
connected in order to recharge the battery.
Or, indicates a problem with the power supply. You
should initially try plugging the AC adaptor into
another power outlet - if it still does not operate
properly, you should contact your reseller or dealer.
Under any other conditions, the indicator does not
light.
Power and Power-Up Modes
6-2
Hide quick links:
Advertisement
Table of Contents
