hit counter script
Fujitsu CELSIUS Mobile H Operating Manual
  1. Manuals
  2. Brands
  3. Fujitsu Manuals
  4. Laptop
  5. CELSIUS Mobile H
  6. Operating manual

Fujitsu CELSIUS Mobile H Operating Manual

Fujitsu celsius mobile h: operating manual
Hide thumbs Also See for CELSIUS Mobile H:
Table of Contents

Advertisement

Quick Links

Download this manual
CELSIUS Mobile H
Operating Manual
May 2002 edition
Introduction
Index
Important notes
Preparing the workstation
for use
Working with the
workstation
Security functions
Connecting external
devices
Settings in BIOS Setup
Troubleshooting and tips
Memory expansion
Technical data

Advertisement

Table of Contents
loading

Related Manuals for Fujitsu CELSIUS Mobile H

Summary of Contents for Fujitsu CELSIUS Mobile H

  • Page 1 CELSIUS Mobile H Operating Manual May 2002 edition Introduction Index Important notes Preparing the workstation for use Working with the workstation Security functions Connecting external devices Settings in BIOS Setup Troubleshooting and tips Memory expansion Technical data...
  • Page 2 This manual was produced by cognitas. Gesellschaft für Technik-Dokumentation mbH www.cognitas.de Copyright ã Fujitsu Siemens Computers GmbH 2002 All rights, including rights of translation, reproduction by printing, copying or similar methods, in part or in whole, are reserved. Offenders will be liable for damages.

  • Page 3: Table Of Contents

    Contents Introduction...1 Notational conventions...2 Important notes...3 Declarations of Conformity...3 Safety ...3 Notes on installing and removing boards and modules ...4 Manufacturer’s notes ...5 Copyright-protected technology ...5 Energy saving ...5 Disposal and recycling ...6 CE marking...6 GS symbol ...6 FCC Class B Compliance Statement ...7 Battery storage ...7 Transporting the workstation...8 Before you travel...8...
  • Page 4 Contents Inserting and removing modules... 37 Optical drives ... 40 Optical drive indicator... 40 Inserting or removing a CD/DVD ... 40 LS240 drive (floppy disk drive) ... 41 Working with floppy disks ... 41 56k-Modem ... 42 Connecting workstation modem to telephone connection ... 42 Connecting the workstation to Ethernet/LAN ...
  • Page 5 Settings in BIOS Setup...71 Start BIOS Setup ...71 Operating BIOS Setup ...71 Exiting BIOS-Setup...72 Troubleshooting and tips...73 CD "CELSIUS Mobile Driver CD"...73 "Recovery CD"...73 Installing new software...73 Restoring the contents of the hard disk under Windows...74 The workstation's date or time is incorrect ...74 Battery indicator does not illuminate ...74 No display appears on the screen...75 The workstation's LCD display is difficult to read ...75...

  • Page 7: Introduction

    Introduction Your CELSIUS Mobile H is a versatile and ergonomic workstation. Innovative technology and ergonomic design make your CELSIUS Mobile H user-friendly and reliable. To simplify the initial start-up of your workstation, one or two operating systems are preinstalled on the hard disk (dual-installation).

  • Page 8: Notational Conventions

    Introduction Notational conventions The following symbols are used in this manual: Pay particular attention to texts marked with this symbol. Failure to observe this warning endangers your life, destroys the system, or may lead to loss of data. Failure to follow the instructions may lead to loss of data, invalidate your warranty, destroy the device, or endanger your life.

  • Page 9: Important Notes

    The "Declarations of Conformity" concerning this workstation can be found at our internet address: http://www.driver-cd.com. Hereby, Fujitsu Siemens Computers, declares that this CELSIUS Mobile workstation is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. (BMWi), (Wien).

  • Page 10: Notes On Installing And Removing Boards And Modules

    With data traffic via a wireless connection, it is also possible for unauthorised third parties to receive data. The company Fujitsu Siemens Computers GmbH cannot be held responsible for radio or television faults arising from unauthorised changes made to this device. Fujitsu Siemens is, furthermore, not responsible for replacing and / or exchanging connector cables and devices which have not been specified by Fujitsu Siemens Computers GmbH.

  • Page 11: Manufacturer's Notes

    8 W when it goes into standby/suspend mode and to less than 3 W when it goes into OFF mode. With this new power management the CELSIUS Mobile H qualifies for the U.S. Environmental Protection Agency's (EPA) Energy Star Computers award.

  • Page 12: Disposal And Recycling

    20 million tons of carbon dioxide into the atmosphere - the equivalent of 5 million automobiles. As an Energy Star Partner, Fujitsu Siemens Computers GmbH has determined that this product meets the Energy Star guidelines for energy efficiency.

  • Page 13: Fcc Class B Compliance Statement

    Consult the dealer or an experienced radio/TV technician for help. Fujitsu Siemens Computers GmbH is not responsible for any radio or television interference caused by unauthorised modifications of this equipment or the substitution or attachment of connecting cables and equipment other than those specified by Fujitsu Siemens Computers GmbH. The correction of interference caused by such unauthorised modification, substitution or attachment will be the responsibility of the user.

  • Page 14: Transporting The Workstation

    Important notes Transporting the workstation Please observe the points listed below when transporting your workstation. Before you travel If the removable keyboard is operated by a radio connection, your workstation may not be switched on during a flight. In this case switch off the keyboard also (see chapter "Working with the workstation").

  • Page 15: Cleaning The Workstation

    Cleaning the workstation Ê Switch off the workstation. Ê Pull the power plug of the network adapter out of the mains outlet. Ê Remove the battery. How to remove the battery is described in the section "Inserting and removing the battery". Do not clean any interior parts yourself;...

  • Page 17: Preparing The Workstation For Use

    Preparing the workstation for use Please read the chapter "Important notes". Before you can work with your workstation, you need to charge the battery and install and configure the delivered software. The operating system and drivers required are preinstalled. Upon delivery, the battery can be found in the battery compartment and is not charged. You need to charge the battery if you want to operate your workstation with a rechargeable battery.

  • Page 18: Switching On Removable Radio Keyboard

    Preparing the workstation for use Should radio interference occur with the keyboard and workstation, because radios or radio equipment are nearby, then move the workstation to a different location or connect the keyboard to the workstation with the PS/2 cable provided (see chapter "Working with the workstation", section "Operating the keyboard without a radio connection".
  • Page 19 Ê Turn the keyboard over (3). Ê Switch the keyboard on with the ON/OFF switch (ON). The keyboard is permanently linked to the workstation by means of a wireless connection, if both devices are switched on. The right-hand indicator on the keyboard lights as soon as a wireless connection is established.

  • Page 20: Connecting The Power Adapter And Switching On The Workstation For The First Time

    Preparing the workstation for use Connecting the power adapter and switching on the workstation for the first time When you switch on your workstation for the first time the supplied software is installed and configured. You should plan some time for this, as this process must not be interrupted. Use only the power adapter provided.

  • Page 21: Installing The Software For The First Time

    After switch-on a self-test (POST, Power On Self Test) is automatically carried out. Never switch the workstation off during the self-test. Installing the software for the first time Leave the external power adapter connected to your workstation during the initial installation.

  • Page 23: Working With The Workstation

    Working with the workstation This chapter describes the basics for operating your workstation. The chapter on "Connecting external devices" has instructions on how to connect external devices (e.g. mouse, printer) to the workstation. Please take note of the information in the chapter "Important notes". Switching the workstation on Ê...

  • Page 24: Switching Off The Workstation

    Working with the workstation Switching off the workstation Ê Shut down the operating system properly. If the workstation does not switch itself off, press the Suspend/Resume button (1) and hold it down for approx. 4 seconds until the power-on indicator The workstation is switched off.

  • Page 25: Indicators On The Workstation

    Indicators on the workstation The following icons appear in the display field of your workstation: The meanings of the symbols are as follows: Power-on indicator The indicator lights up: The workstation is on. The indicator flashes (1 second on / 1 second off): The workstation is in energy-saving mode.
  • Page 26 Working with the workstation Hard disk indicator The indicator lights up when the hard disk drive is being accessed. Optical drive indicator The indicator is lit when the CD/DVD in the optical drive is being accessed. You must not remove the CD/DVD from the drive when this indicator is lit. LS240 drive indicator The indicator lights up when a floppy disk in the LS240 drive is being accessed.

  • Page 27: Operating The Removable Radio Keyboard

    Operating the removable radio keyboard Please take note of the safety information in the "Important notes" chapter. Removing the radio keyboard If you are unable to establish a connection between the keyboard and the CELSIUS Mobile Workstation, switch the keyboard off and then on again with the ON/OFF switch on the underside of the keyboard.

  • Page 28: Attaching The Radio Keyboard

    Working with the workstation Attaching the radio keyboard Charging the keyboard battery When the keyboard is attached to the workstation, the keyboard battery will be charged. The battery indicator is on when the keyboard battery is charging. The battery indicator flashes if the battery is low and the keyboard is removed. Re-attach the keyboard so that the keyboard battery can recharge.

  • Page 29: Replacing The Keyboard Battery

    Replacing the keyboard battery The keyboard battery has a limited service life. If the battery indicator flashes soon after charging, the keyboard battery has to be replaced. You obtain the information on the appropriate battery type from your sales outlet or our Hotline/Help Desk.

  • Page 30: Switching The Radio Keyboard On And Off

    Working with the workstation Ê Insert the new keyboard battery. Ê Plug the connector of the keyboard battery into the connector in the battery compartment. Ê Close the battery compartment. Ê Re-attach the keyboard. Switching the radio keyboard on and off If you will not be using the radio keyboard, switch it off.

  • Page 31: Operating The Keyboard Without A Radio Connection

    Operating the keyboard without a radio connection For safety reasons you should not operate the keyboard with radio connection in some situations (see "Safety" chapter). You have to connect the keyboard to the workstation using the PS/2 cable supplied with your workstation, if your are in an aircraft you are in a hospital...

  • Page 32: Indicators On The Keyboard

    Working with the workstation Indicators on the keyboard CapsLK indicator (Caps Lock) The Caps Lock key has been pressed. All the characters you type appear in uppercase. In the case of overlay keys, the character printed on the upper left of the key appears when that key is pressed.

  • Page 33: Description Of Keys

    Description of keys The keyboard of your workstation is subject to continuous wear due to normal use. The keyboard markings are subjected to particularly high loads. The keyboard markings can wear off in the course of using the workstation. The following description of keys refers to Windows. Additional functions supported by the keys are described in the relevant manuals supplied with your application programmes.
  • Page 34 Working with the workstation Fn key The [Fn] [Fn] key enables the special functions indicated on overlay keys (see "Key [Fn] [Fn] combinations"). If the external keyboard does not feature an [Fn] the [Ctrl] [Ctrl] [Ctrl] + [Alt [Ctrl] [Alt [Alt Gr] [Alt Gr] keys or the [Ctrl]...
  • Page 35 Ê While holding the first key down, press the other key or keys in the combination. If the external keyboard does not feature an [Fn] the [Ctrl] [Ctrl] + [Alt [Ctrl] [Ctrl] [Alt [Alt Gr] [Alt Gr] keys or the [Ctrl] Connecting keyboard and workstation ("Pair") This key combination "acquaints"...

  • Page 36: Touchpad And Touchpad Buttons

    Working with the workstation Backtab (Shift+Tab) This key combination moves the cursor back to the previous tabular stop. Carrying out a warm boot Ctrl Warm boot This key combination restarts the workstation. First hold down the [Ctrl] [Ctrl] [Ctrl] and [Alt] [Ctrl] Windows 98, Windows 2000, Windows Me, Windows XP and Windows NT the Task Manager appears first.

  • Page 37: Lcd Display Panel

    LCD display panel Information on LCD monitor High-quality TFT monitors are installed in CELSIUS Mobile H workstations from Fujitsu Siemens Computers GmbH. The specification of the monitor resolution indicates how many pixels can be displayed. For example, "UXGA" stands for 1600 x 1200 pixels. Each pixel consists of three so- called subpixels of the colours red, green and blue.

  • Page 38: Battery

    Working with the workstation Battery The battery is one of the most important components of your workstation. When not plugged into a mains outlet, the workstation runs on its built-in battery. You can increase the life of the battery by caring for the battery properly.

  • Page 39: Charging The Battery

    Charging the battery The battery indicator displays the remaining battery charge (see the chapter "Indicators on the workstation"). When you switch on the workstation, it takes a few seconds before the battery status is displayed. You can charge the battery by connecting the workstation to the power adapter (see "Connecting the power adapter and switching on the workstation for the first time").
  • Page 40 Working with the workstation Removing the battery Ê Push the slide in the direction of the arrow (1) up to the stop and hold it in place. Ê Pull the battery out of the casing in the direction of the arrow (2). A26391-K124-Z100-1-7619...
  • Page 41 Installing the battery Ê Push the slide in the direction of the arrow (1) up to the stop and hold it in place. Ê Position the battery at the edge of the casing (2) and then press it into the workstation. A26391-K124-Z100-1-7619 Working with the workstation...

  • Page 42: Using The Power-Management Features

    Working with the workstation Using the power-management features The workstation uses less power when the power management features are enabled. You will then be able to work longer when using the battery before having to recharge it. If you are connected to a network or use the integrated modem, PC LAN card, or PC modem card, we advise against enabling an energy saving mode.

  • Page 43: Hard Disk

    Changing settings Ê Double-click on the My Computer symbol. Ê Double-click on the Control Panel symbol. Ê Double-click on the Power management symbol in the Control Panel window. The Properties dialogue field appears. Ê Adjust the setting to your needs. Ê...
  • Page 44 Working with the workstation Removing modules Ê Push the slide in the direction of the arrow (1) up to the stop and hold it in place. To remove the left-hand module, push the slide to the right. To remove the right-hand module, push the slide to the left.
  • Page 45 Installing modules Ê Push the slide in the direction of the arrow (1) up to the stop and hold it in place. To install the left-hand module, push the slide to the right. To install the right-hand module, push the slide to the left. Ê...

  • Page 46: Optical Drives

    Working with the workstation Optical drives Your workstation is fitted with a combo drive (CD-RW/DVD). This device contains a light-emitting diode, classified according to IEC 825-1:1993: LASER CLASS 1, and must not be opened. Avoid touching the surface of a CD/DVD. Handle CDs/DVDs only by their edges! Always store CDs/DVDs in their cases.

  • Page 47: Ls240 Drive (Floppy Disk Drive)

    LS240 drive (floppy disk drive) Never clean the floppy disk drive with cleaning disks. Any attempt would destroy the read/write head in the disk drive within 20 seconds. Working with floppy disks Follow the instructions supplied by the vendor of the floppy disks. 1 = Insertion direction 2 = Label area 3 = Write protection tab for a 1.44 Mbyte floppy disk...

  • Page 48: 56K-Modem

    Working with the workstation 56k-Modem A modem is already installed in your workstation. The 56k modem supports all data communication applications, such as: Modem operation: High-speed downloads at up to 56,000 bit/s (V.90). Downward-compatible to V.34 modems. Fax mode: Transmitting and receiving at up to 14,400 bit/s Simple country adaptation with programme The modem complies with the EU Directive 91/263/EEC (Telecommunications terminal equipment directive) and has been checked in agreement with the guideline TBR-21.

  • Page 49: Connecting The Workstation To Ethernet/Lan

    If you attach your modem on a TAE-N-connector the phone respectively data cable is busy. The cable cannot be used for other communication devices at the same time. Pull the modem plug out of the TAE-N-power socket after the data transfer, because also with connected cable no other communication devices can be used.

  • Page 50: Connecting Ieee1394 (Firewire)

    Working with the workstation Connecting IEEE1394 (FireWire) Your workstation is equipped with an IEEE1394 (FireWire) connection, which operates at 400 Mbit per second, as an option. Peripheral devices such as digital audio/video devices or other high-speed devices can be connected via IEEE1394 (FireWire). Ê...

  • Page 51: Pc Cards

    PC cards Two PC card slots enable the device to operate two type II PC cards or one type III PC card (CardBus or PCMCIA). Consult the documentation supplied by the PC card's manufacturer and follow the instructions provided. Never use force when inserting or removing a PC card. Make sure that foreign objects do not fall into the PC card slot.

  • Page 52: Removing A Pc Card

    Working with the workstation Removing a PC card Ê Press the eject button (1). It will project further out of the workstation's case. If the eject buttons are pushed in flush with the workstation casing, they must first be snapped out. Press the eject buttons until they snap out.

  • Page 53: Microphone And Loudspeakers

    Working with the workstation Microphone and loudspeakers 1 = Built-in microphone 2 = Built-in loudspeakers Your workstation contains a built-in microphone (1) and two loudspeakers (2). If you attach an external microphone, the built-in microphone is disabled. The internal loudspeakers switch off when you attach headphones or external loudspeakers to the audio jack.

  • Page 55: Security Functions

    Security functions Your workstation enables you to protect your system and personal data against unauthorised access in a number of ways. By combining these options, you can achieve maximum protection for your system. In this chapter you will learn which security functions your workstation is equipped with, which advantages these functions offer you and how to configure and use them.

  • Page 56: Smartcard Reader

    Security functions SmartCard reader Your workstation also allows operation of a SmartCard via the SmartCard slot. The SmartCard can be used as a particularly secure alternative or as an addition to password protection. SmartCards are just as useful for digital signatures or for encrypting e-mails. You can also read out other cards with your SmartCard reader (e.g.

  • Page 57: Using Kensington Lock

    Using Kensington Lock Ê Fit the Kensington MicroSaver on the device (a) on your workstation. Configuring password protection in BIOS Setup Passwords can be up to eight characters long. You can use all alphanumeric characters and need not distinguish between uppercase and lowercase characters. Before you exploit the various options of the password protection for your data security in the BIOS Setup, please note the following points: Please keep in mind your passwords in any case, as you will not be able to access your...

  • Page 58: Protecting Bios Setup (Supervisor And User Password)

    Security functions Protecting BIOS Setup (supervisor and user password) We recommend that you print out the following instructions, as these cannot be displayed while setting the password. You prevent unauthorised opening of the BIOS Setup with both the supervisor and the user password.

  • Page 59: Password Protection Of Operating System

    The workstation is rebooted and the password is cancelled. Cancelling the supervisor password invalidates the user password at the same time. Password protection of operating system With the supervisor password or the user password, which you have assigned in the BIOS Setup (see the Section "Entering supervisor and user password"), you can also block booting of the operating system.

  • Page 60: Configuring And Using Smartcard Reader

    Security functions You can set hard disk protection separately for each hard disk (for the internal and the two optional hard disks). Internal Hard Disk Security Hard disk protection for the internal hard disk Left Bay Security Hard disk protection for the hard disk in the left bay Hard disk protection for the hard disk in the right bay Right Bay Security Ê...

  • Page 61: Application Examples

    Inserting the SmartCard Ê Push the SmartCard into the lower slot guide with the chip facing upward and at the front. Ê Gently push the SmartCard into the slot until you feel it click into place. Never use force when inserting and removing the SmartCard holder and SmartCard. Make sure that foreign objects do not fall into the SmartCard holder.

  • Page 62: Configuring And Using Fingerprint Sensor

    Security functions SmartCard for protecting your opened documents The range of functions of the SmartCard enables you to interrupt your work. Thanks to the SmartCard, you can leave your workstation unattended without unauthorised persons being able to access your opened documents and data. Ê...
  • Page 63 Testing fingerprint The option Please test to find suitable fingers allows you to test your fingerprint first. Make sure that the contact area for your fingertip is big enough. The more uniform the structure of your fingerprint, the less features are recognised by the sensor.

  • Page 64: Using Fingerprint Sensor

    Security functions Using fingerprint sensor Every time the device is booted you are requested to Place your finger on the sensor. Ê Place one of your registered fingertips (supervisor or user fingerprint) on the sensor. Your workstation starts. If the fingerprint sensor does not recognise your fingerprint immediately, a note is issued Sorry, not accepted.

  • Page 65: Deactivating Fingerprint Sensor

    Ê Press the required fingertip on the fingerprint sensor several times in a row. Follow the instructions in the BIOS window. Ê Press the [Esc] [Esc] key. [Esc] [Esc] The workstation restarts. Adding user fingerprint Ê Call BIOS Setup and select the Security menu. Ê...

  • Page 66: Troubleshooting

    Security functions Troubleshooting BIOS passwords You have forgotten your user and/or supervisor password. If you have forgotten your user password, enter the supervisor password or contact your system administrator. If the supervisor password is also no longer available, contact our Help Desk. The Help Desk will refer you to our service partner, who will unlock your workstation (for a charge).

  • Page 67: Connecting External Devices

    Connecting external devices Under all circumstances, please observe the safety notes provided in the "Important notes" chapter. Read the documentation on the external device before connecting it. Do not connect or disconnect cables during a thunderstorm. Do not pull on the cable when disconnecting a cable. Always take hold of the actual plug. Adhere to the order described in the following when you connect external devices to the workstation or separate them from the workstation: Connecting devices to the workstation...
  • Page 68 Connecting external devices 1394 SPDIF Connections on the left side Connections on the right side A26391-K124-Z100-1-7619...

  • Page 69: Connecting An External Monitor

    The ports are marked with the following symbols (or with similar symbols): LAN-port (Local Area Network, for Network connection) PS/2 port (for keyboard or mouse) Parallel port Digital/analogue monitor port Serial port Modem port Video output (S-Video Out jack) for connecting a television or video device Some of the external devices require special drivers (see the operating system and external device documentation).

  • Page 70: Connecting An External Keyboard

    Connecting external devices If the refresh rate set is too high, the monitor may be damaged. Please see the documentation included with your monitor for the maximum possible refresh rate. Connecting an external keyboard You do not need to switch off your workstation. Ê...

  • Page 71: Establishing An Infrared Connection

    Establishing an infrared connection Using the infrared software for Windows, you can communicate with another PC or printer equipped with an infrared interface. Before you can establish an infrared connection, you must have activated the infrared software. Additional information on the infrared interface is contained in the Windows help in the Start menu under the topic "Infrared".

  • Page 72: Operating Workstation With Docking Device

    Connecting external devices Operating workstation with docking device The "Port Replicator II-L" instantly turns your device into a convenient, easy-to-operate workstation. For additional information on the Port Replicator II-L, also see the documentation on the docking devices. You should install your workstation's software (operating system, device drivers) before docking the workstation the first time.

  • Page 73: Indicators On The Ii-L Port Replicator

    1 = Suspend/Resume button 2 = Eject button Suspend/Resume button The Suspend/Resume button functions like the Suspend/Resume button on the workstation. Reset button When you press the Reset button, you carry out a reboot on the docking device and on the workstation.

  • Page 74: Removing The Tray

    Connecting external devices Removing the tray Ê Push the release (1) in the direction of the arrow until the Tray is released on both sides. Ê Remove the Tray (2). Docking workstation Docking workstation while running If an operating system is installed on your workstation that supports "Plug & Play" and "hot docking" (e.g.

  • Page 75: Removing Workstation

    Ê Place your workstation on the docking device and push it evenly in the direction of the arrows until you feel it engage. Docking switched-off workstation The power adapter cable may not be connected to the DC socket (DC IN) of the workstation when you dock the workstation.
  • Page 76 Connecting external devices Removing switched-off workstation Ê Move the lever in the direction of the arrow (1). Ê Remove the workstation toward the front (2). A26391-K124-Z100-1-7619...

  • Page 77: Settings In Bios Setup

    Settings in BIOS Setup In BIOS Setup you can set the system functions and the hardware configuration of the workstation. The settings can only be changed via the keyboard. When it is supplied, the workstation is set to factory default settings. You can change these settings in BIOS Setup.

  • Page 78: Exiting Bios-Setup

    Settings in BIOS Setup Ê For future reference, make a note of the changes you have made (for example, in this manual). Exiting BIOS-Setup To exit BIOS Setup, select the Exit menu from the menu bar. You can then decide which settings you want to save.

  • Page 79: Troubleshooting And Tips

    Troubleshooting and tips Take note of the hints in the chapter "Connecting external devices", when you connect or disconnect cables. If a fault occurs in your workstation, try to eliminate it with the measures described in this chapter. If you fail to correct the problem, proceed as follows: Ê...

  • Page 80: Restoring The Contents Of The Hard Disk Under Windows

    Troubleshooting and tips Restoring the contents of the hard disk under Windows Using the Windows Recovery CD and the CELSIUS Mobile Driver CD, you can restore the operating system of your workstation. During restoring the operating manual the contents of your hard disk will be overwritten. After this, operating system, drivers and software utilities will be reinstalled.

  • Page 81: No Display Appears On The Screen

    No display appears on the screen The screen power-management feature may be active. Ê Press any key to activate the display. The workstation is in Standby or Suspend mode. Ê Press the Suspend/Resume button to end the Standby or Suspend mode. The workstation is set so that the picture only appears on the external screen.

  • Page 82: The External Monitor Is Blank Or The Image Is Unstable

    Troubleshooting and tips Ê When using an analogue monitor check, if the monitor adapter supplied with your workstation is connected correctly. Ê Switch on the external monitor and the workstation. The external monitor is blank or the image is unstable Two causes are possible: An incorrect type has been selected for the external monitor or the wrong screen resolution has been set for the application programme.

  • Page 83: The Workstation Switches Itself Off When You Disconnect The Power Adapter

    The workstation is prevented from booting by a disk in the floppy disk drive. Ê Check whether this floppy disk is a system disk. Remove the floppy disk. Operating system files may be damaged or missing. Ê Boot the workstation with a system floppy disk, via the floppy disk drive. The safety function indicator lights up.

  • Page 84: The Battery Discharges Too Quickly

    Troubleshooting and tips The battery discharges too quickly The battery is either too hot or too cold. In this case the battery indicator flashes. Ê Bring the workstation up / down to a normal temperature again. If the operating time of the battery mode is extremely short, the battery is probably old and should be replaced.

  • Page 85: The Cd-Rom/Dvd-Rom Does Not Function

    The CD-ROM/DVD-ROM does not function Check whether the CD/DVD has been properly inserted into the drive. Ê Check whether the CD/DVD is scratched, warped, dirty or damp. Ê Make sure that you use a CD/DVD that complies with the standards. Ê...

  • Page 86: The Workstation Casing Gets Warm

    Troubleshooting and tips Ê Check in the BIOS Setup whether the Advanced - I/O Device Configuration field is set to Enabled for the port you are using. The respective entry in the fields of Serial port A, B or Parallel port must match the setting in the application programme under Windows.
  • Page 87 Invalid system disk - Replace the disk, and then press any key The inserted disk is not a system disk or the inserted system disk is defective. Ê Insert another system disk. Ê Press any key to continue. If you wish to boot from floppy disk: Ê...

  • Page 88: Contact With Hotline/Help Desk

    Troubleshooting and tips Previous boot incomplete - Default configuration used Due to an error during the previous system boot, default values were used for certain settings. Check the BIOS Setup and the settings. Ê Press the [F1] [F1] function key when prompted to do so. [F1] [F1] Real Time clock error...

  • Page 89: Memory Expansion

    Memory expansion The workstation must be switched off when installing/removing the memory modules and may not be in the Suspend mode. So that the current data can be saved in the Save to Disk suspend mode, sufficient memory space must be available on the hard disk (at least the size of the main memory +64 Mbytes).
  • Page 90 Memory expansion Installing memory modules Ê Carefully push the two mounting clips outwards (1). Ê Insert the memory module, contacts first, into the slot (2). Ê Carefully push the memory module downwards until you feel it latch into place (3). Removing memory modules Ê...
  • Page 91 The memory module will flap upward (2). Ê Pull the memory module out of its slot (3). Mounting the cover Ê Refit the battery. Ê Place the workstation right side up on a flat, stabile, nonslippery surface. Ê Reconnect the cables. A26391-K124-Z100-1-7619 Memory expansion Ê...

  • Page 93: Technical Data

    Technical data Workstation Processor: Chipset: Socket: Main memory: Possible modules: Electrical data Regulations complied with: Protection class: Maximum power draw: (workstation on with battery charging) LCD display panel Display diagonal: Supported screen resolution: Graphics Chip: Video memory: Supported resolutions on external monitor: Colour depth: Audio Sound:...
  • Page 94 Technical data Input devices Keyboard: Touchpad: Slots PC Card slots (CardBus/PCMCIA): Ports PS/2 port: Parallel port: Monitor port: Serial port: Microphone jack: Headphones/digital audio output (SPDIF): Video port: Modem port: USB port (Universal Serial Bus): Infrared interface: LAN connector: IEEE FireWire port: Kensington Lock Environmental conditions Environment class (3K2)

  • Page 95: Battery

    Battery Rated voltage: Rated capacity: Charging time (when not in operation): Operating time with a battery: Power adapter Protection class: Primary Rated voltage: Frequency: Secondary Rated voltage: Max. rated current: You can readily order an additional power adapter and an additional power cable. A26391-K124-Z100-1-7619 Technical data 11,1 V...

  • Page 96: Radio Keyboard

    Technical data Radio keyboard Frequency range: RF output Power: Receiver sensitivity: Range in typical operating environment: Electrical characteristics Keyboard battery: Service life of keyboard battery Power consumption: Optical indicator: Type of modulation: Channel spacing: Designation of emission: Transmit RF power or power range: Duty cycle: Channel access protocol: Duplex direction:...

  • Page 97: Index

    Index 1394 Firewire 44 56k modem 42 Acoustic warnings 80 ACPI 36 changing settings 37 Activating hard disk protection 53 Alt Gr key 27 Analogue monitor port 63 Application examples, SmartCard 55 Attaching radio keyboard 22 Audio input, Port Replicator II-L 66 Audio output, Port Replicator II-L 66 Backtab 30 Battery 32...
  • Page 98 Index Damage during transport 11 Data audio controller 87 battery 89 dimensions 88 electrical 87 environmental conditions 88 graphics controller 87 input devices 88 LCD screen 87 modem 87 ports 88 power adapter 89 radio keyboard 90 slots 88 technical 87 battery 89 power supply unit 89 workstation 87...
  • Page 99 Hard disk 37 indicator 20 protecting with password 53 protection, cancelling 54 restoring the operating system 74 Hardware, configuring 71 Headphone port 63 Hotline/Help Desk 82 IEEE1394 (FireWire), connecting 44 Important notes 3 Indicator CapsLK 20 floppy disk drive 20 LS240 drive 20 Num Lock 20 optical drive 20, 40...
  • Page 100 Index LAN port 63 LAN port, Port Replicator II-L 66 LAN, integrated 44 LCD screen cleaning 9 increasing the brightness 29, 31 notes 31 opening 17 reducing the brightness 29, 31 reflected glare 75 setting the Desktop Area 31 setting the font size 31 settings 31 synchronising the display 31 technical data 87...
  • Page 101 Password protection 49 BIOS password 49 BIOS Setup 51 hard disk 49, 53 operating system 49 Passwords forgotten 60 Pause key 28 PC card 45 eject button, push into 45 installing 45 removing 46 PC Card, see PC card PIN forgotten 60 Pointer, changing the speed 31 Pointer, no mouse pointer 79 Port Replicator II-L...
  • Page 102 Index Software initial installation 15 installing new software 73 new installation 73 SPDIF, digital audio output 63 Speed Step indicator 19 switching on 29 Standby mode, terminating 77 Start disk for Windows ME 74 Start key 28 Storage, battery 7 Summer time 74 Supervisor password 49 Survey, security functions 50...

Table of Contents