hit counter script

Sony VAIO PCG-R600HFK User Manual page 86

Hide thumbs Also See for VAIO PCG-R600HFK:
Table of Contents

Advertisement

Getting help
3
Set the i.LINK™ network switch on the bottom of the docking station to the unmarked side with a thin
pen tip.
4
Connect the docking station to your notebook.
5
Turn on your notebook.
You can now operate the CD-RW/DVD-ROM drive or the DVD-ROM drive.

Do not set the i.LINK™ network switch when the notebook is on. It causes malfunction.
Set the i.LINK™ network switch after removing all cables connected to the docking station.
I cannot operate the CD-RW/DVD-ROM drive or the DVD-ROM in the docking station connected to the
notebook when the notebook is connected to another computer by means of an i.LINK™ cable
Set the i.LINK™ network switch on the bottom of the docking station to the On position.
I cannot remove the disk inserted in the drive
You cannot remove disks when the computer is in a power saving mode. Return to normal mode and then
press the eject button.
The disk tray does not eject even when the eject button is pressed
Open the tray by inserting a sharp, pointed object in the manual eject hole.
When I disconnect the docking station, a warning message appears
Close all open applications and disconnect the peripheral devices, then disconnect the docking station by
following the procedure in Disconnecting your computer from the docking station
n N
85
(page
58).

Advertisement

Table of Contents
loading

Table of Contents