Ubiquiti EdgeRouter ER-8 Quick Start Manual
8-port router
Hide thumbs
Also See for EdgeRouter ER-8:
- Quick start manual (14 pages) ,
- Quick start manual (20 pages)
Related Manuals for Ubiquiti EdgeRouter ER-8
Summary of Contents for Ubiquiti EdgeRouter ER-8
- Page 1 https://arttel.ru/ 8-Port Router Model: ER-8 https://arttel.ru/shop/marshrutizatory/ubiqu...
-
Page 2: Package Contents
Introduction Thank you for purchasing the Ubiquiti Networks® 8-Port EdgeRouter . This Quick Start Guide is designed to guide you ™ through installation and also includes warranty terms. Package Contents EdgeRouter ER-8 Mounting Screws Cage Nuts (#10-32 x 5/8", Qty. 4) (#10-32 x 5/8", Qty. -
Page 3: Installation Requirements
AC ground of the power supply. We recommend that you protect your networks from harmful outdoor environments and destructive ESD events with industrial-grade, shielded Ethernet cable from Ubiquiti Networks. For more details, visit: www.ubnt.com/toughcable WARNING: To reduce the risk of fire or electric shock, do not expose the EdgeRouter to rain or moisture. -
Page 4: Hardware Overview
https://arttel.ru/ Hardware Overview Front Panel Ports Console RJ45 (eth0-eth7) Interface Description RJ45 serial console port for Command Line Interface (CLI) management. Use an RJ45-to-DB9, serial console cable, also known as a rollover cable, to connect the Console port to your computer. (If your computer does not have a DB9 port, then you will also need a DB9 adapter.) Then Console... - Page 5 https://arttel.ru/ Front Panel Button Reset Button Description There are two methods to reset the EdgeRouter to factory defaults: • Runtime reset (recommended) The EdgeRouter should be running after bootup is complete. Press and hold the Reset button for about 10 seconds until the right LED on RJ45 port eth7 starts flashing and then becomes solidly lit.
-
Page 6: Front Panel Leds
https://arttel.ru/ Front Panel LEDs The LEDs on the left side of the RJ45 ports are not used at this time. Below is a description of the other LEDs: Speed/Link/Act Power State Status No Link Link Established at Amber 10/100 Mbps Link Activity at Speed/ Amber Flashing 10/100 Mbps... -
Page 7: Hardware Installation
https://arttel.ru/ Hardware Installation WARNING: FAILURE TO PROVIDE PROPER VENTILATION MAY CAUSE FIRE HAZARD. KEEP AT LEAST 20 MM OF CLEARANCE NEXT TO THE VENTILATION HOLES FOR ADEQUATE AIRFLOW. 1. Attach the EdgeRouter to the rack using the four Mounting Screws. (If the rack has square slots, then use the Cage Nuts with the Mounting Screws.) 2. -
Page 8: Accessing The Configuration Interface
https://arttel.ru/ 3. Connect the other end of the Power Cord to a power outlet. Accessing the Configuration Interface 1. Connect an Ethernet cable from the Ethernet port of your computer to the port labeled eth0 on the 8-Port EdgeRouter. 2. Configure the Ethernet adapter on your host system with a static IP address on the 192.168.1.x subnet. - Page 9 4. The login screen will appear. Enter ubnt in the Username and Password fields. Read the Ubiquiti License Agreement, and check the box next to I agree to the terms of this License Agreement to accept it. Click Login.
-
Page 10: Specifications
https://arttel.ru/ Specifications 8-Port EdgeRouter Dimensions 484 x 164 x 44 mm (19.06 x 6.46 x 1.73") Weight 2.3 kg (5.07 lb) Max. Power Consumption 35 W Power Method 110 - 240VAC Power Supply Internal AC/DC Power Adapter, 60 W (24V, 2.5A) Button Reset Power... -
Page 11: Safety Notices
https://arttel.ru/ Safety Notices Read, follow, and keep these instructions. Heed all warnings. Only use attachments/accessories specified by the manufacturer. WARNING: Failure to provide proper ventilation may cause fire hazard. Keep at least 20 mm of clearance next to the ventilation holes for adequate airflow. WARNING: To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. -
Page 12: Limited Warranty
Ubiquiti MAC label, or is missing any other original Ubiquiti label(s); or (VII) has not been received by Ubiquiti within 30 days of issuance of the RMA. In addition, the above warranty shall apply only if: the product has been properly installed and used at all times in accordance, and in all material respects, with the applicable Product documentation;... - Page 13 No Products will be accepted for replacement or repair without obtaining a Return Materials Authorization (RMA) number from UBIQUITI NETWORKS during the warranty period, and the Products being received at UBIQUITI NETWORKS’ facility freight prepaid in accordance with the RMA process of UBIQUITI NETWORKS.
-
Page 14: Limitation Of Liability
Limitation of Liability EXCEPT TO THE EXTENT PROHIBITED BY LOCAL LAW, IN NO EVENT WILL UBIQUITI OR ITS SUBSIDIARIES, AFFILIATES OR SUPPLIERS BE LIABLE FOR DIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL OR OTHER DAMAGES (INCLUDING LOST PROFIT, LOST DATA, OR DOWNTIME COSTS), ARISING... -
Page 15: Industry Canada
https://arttel.ru/ Compliance Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation. - Page 16 https://arttel.ru/ RoHS/WEEE Compliance Statement English European Directive 2012/19/EU requires that the equipment bearing this symbol on the product and/or its packaging must not be disposed of with unsorted municipal waste. The symbol indicates that this product should be disposed of separately from regular household waste streams.
- Page 17 https://arttel.ru/ Español La Directiva 2012/19/UE exige que los equipos que lleven este símbolo en el propio aparato y/o en su embalaje no deben eliminarse junto con otros residuos urbanos no seleccionados. El símbolo indica que el producto en cuestión debe separarse de los residuos domésticos convencionales con vistas a su eliminación.
-
Page 18: Declaration Of Conformity
Ezennel UBIQUITI NETWORKS kijelenti, hogy ez a UBIQUITI NETWORKS készülék megfelel az alapvető követelményeknek és más [Hungarian] vonatkozó 2014/30/EU, 2014/35/EU irányelvek rendelkezéseit. Íslenska Hér, UBIQUITI NETWORKS, því yfir að þetta UBIQUITI NETWORKS tæki er í samræmi við grunnkröfur og önnur viðeigandi ákvæði tilskipana [Icelandic] 2014/30/ESB, 2014/35/ESB. Italiano Con la presente, UBIQUITI NETWORKS, dichiara che questo dispositivo UBIQUITI NETWORKS, è... -
Page 19: Online Resources
[Slovak] a ďalšími relevantnými ustanoveniami smernice 2014/30/EÚ, 2014/35/EÚ. Español Por medio de la presente UBIQUITI NETWORKS declara que este dispositivo UBIQUITI NETWORKS, cumple con los requisitos [Spanish] esenciales y cualesquiera otras disposiciones aplicables o exigibles de las Directivas 2014/30/UE, 2014/35/UE. - Page 20 . u b n t . c o m ©2013-2016 Ubiquiti Networks, Inc. All rights reserved. Ubiquiti, Ubiquiti Networks, the Ubiquiti U logo, the Ubiquiti beam logo, EdgeMAX, EdgeOS, EdgeSwitch, and TOUGHCable are trademarks or registered trademarks of Ubiquiti Networks, Inc. in the United States and in other countries.