Table of Contents
Advertisement
Screen 2: Setting the cycle time
Your Q-Series ultrasonic bath is factory pre-set with a cycle time of 15
minutes. Use this screen to amend the cycle time.
Use the UP and DOWN keys to scroll through the numbers to increase or
decrease the time of up to 99 minutes.
When the desired cycle time has been selected, use the MENU key to move
to the next screen.
Screen 3: Setting the power level
Your Q-Series ultrasonic bath allows the power level of the ultrasonic activity
to be adjusted. This allows the cleaning cycle to be accurately tailored to the
specific cleaning application.
Use the UP and DOWN keys to scroll through the numbers between 50 and
100%.
When the desired power level has been selected, use the MENU key to move
to the next screen.
Q-Series Operating Manual
12
C6012106
Advertisement
Table of Contents
