Vacon NX Series Operating Manual
Dc/dc converter
Hide thumbs
Also See for NX Series:
- Applications manual (392 pages) ,
- User manual (122 pages) ,
- Maintenance manual (65 pages)
Related Manuals for Vacon NX Series
Summary of Contents for Vacon NX Series
- Page 1 All manuals and user guides at all-guides.com vacon nx ® ac drives dc/dc converter operating guide...
- Page 2 All manuals and user guides at all-guides.com...
-
Page 3: Table Of Contents
All manuals and user guides at all-guides.com vacon • 1 TABLE OF CONTENTS Document ID:DPD01901A Revision release date: 01.11.2016 1. Introduction ........................ 2 Application functionality......................2 Connection..........................2 2. Parameters ......................... 7 Source side parameters......................7 2.1.1 Basic parameters....................7 2.1.2... -
Page 4: Introduction
All manuals and user guides at all-guides.com vacon • 2 Introduction NTRODUCTION The DC/DC application creates output according to the needs of the system, and it is possible to integrate into the system with different topologies. Choosing applicable topology, see the Design Guide, Hybridization (DPD01887A). - Page 5 All manuals and user guides at all-guides.com Introduction vacon • 3 B+/R+ U V W L1 L2 L3 U V W L1 L2 L3 U V W L1 L2 L3 U/T1 V/T2 W/T3 U V W U V W L1 L2 L3 L1 L2 L3 B+/R+ Figure 2.
- Page 6 All manuals and user guides at all-guides.com vacon • 4 Introduction Figure 3. CH62 main terminals Local contacts: http://drives.danfoss.com/danfoss-drives/local-contacts/...
- Page 7 All manuals and user guides at all-guides.com Introduction vacon • 5 DC+ DC- DC+ DC- FI 9/10 CONTROL H1..H7 U V W U V W FI4-FI8 FI9-FI10 Figure 4. FI4-FI10 basic wiring diagrams NOTE: The location and selection of fuses varies according to system design.
- Page 8 All manuals and user guides at all-guides.com vacon • 6 Introduction DC+ DC- DC+ DC- FI10 FI10 CONTROL CONTROL X10 H1-H7 X10 H1-H7 U V W U V W FI10 FI10 Module 1 Module2 Figure 5. 2 x FI10 basic wiring diagram NOTE: The location and selection of fuses varies according to system design.
-
Page 9: Parameters
DC power source. There should also not be any load on the DC-link. Select the identification run and give the DC/DC converter a start command within 20 seconds after the identification mode is selected. 24-hour support +358 (0)201 212 575 • Email: service@vacon.com... -
Page 10: Voltage Reference
All manuals and user guides at all-guides.com vacon • 8 Parameters 2.1.2 Voltage reference Table 2. Voltage reference handling Code Parameter Unit Default Note P2.2.1.1 Voltage Reference 1462 P 2.2.1.2 Drooping Voltage Reference P 2.2.1.3 1867 Ramp Rate 0 = Reference... -
Page 11: Current Reference
The U phase current reference on an individual mode. P2.2.2.2.3 IV C ID129 URRENT REFERENCE The V phase current reference on an individual mode. P2.2.2.2.4 IW C ID130 URRENT REFERENCE The W phase current reference on an individual mode. 24-hour support +358 (0)201 212 575 • Email: service@vacon.com... -
Page 12: Source Voltage
All manuals and user guides at all-guides.com vacon • 10 Parameters 2.1.4 Source voltage Table 4. Source voltage Code Parameter Unit Default Note P2.5.4.1 Source min voltage 50.0 1100.0 200/345 1893 Discharge limit P2.5.4.2 Source max voltage 50.0 1100.0 749/1099... -
Page 13: Dc-Link Side Parameters
NDER VOLTAGE DROOP The under voltage reference drooping. The set drooping is reached when the active current is 100%. NOTE: For more detailed parameter information, see the Vacon NX Programming Guide (DPD01886A). 24-hour support +358 (0)201 212 575 • Email: service@vacon.com... -
Page 14: Control Io
All manuals and user guides at all-guides.com vacon • 12 Control IO ONTROL Table 8. Default I/O configuration NXOPTA1 Terminal Signal Description Voltege for +10 Vref Reference voltege output potentiometer, etc. Analogue input 1. Analogue input 1Input range = 200 Ω... - Page 15 All manuals and user guides at all-guides.com www.danfoss.com Document ID: *DPD01901A* Vacon Ltd DPD01901A Member of the Danfoss Group Rev. A Runsorintie 7 65380 Vaasa Sales code: DOC-INSDCDC+DLUK Finland...