Table of Contents
Advertisement
NLTroubleshooting
Malfunction
"E:36 / -10"
"E:36 / -25 / -26"
"E:10 / -00 / -10 /
- 20"
"H:32"
"E:30 / -10" and/or
48
Cause and Troubleshooting
When dosing manually, reduce the amount of
▶
detergent for the next wash with an equal load.
Unauthorized extension mounted on the water drain
hose.
Remove unauthorized extensions from the water
▶
drain hose.
→
†Connecting the device", page 16
Pump cover is not fully screwed in.
Make sure that the pump cover is screwed into the
▶
device as far as it will go. The pump cover handle
must be vertical.
Drain pump is clogged.
→
▶
†Cleaning the drain pump", page 44
Pump of the intelligent dosing system is blocked.
Turn off the device.
1.
Clean the pump unit.
2.
→ †Cleaning the detergent drawer", Page
42
Turn on the device.
3.
If the indication reappears after cleaning the pump
4.
unit, call the service.
→
†Customer Service", page 60
Remark:Until the fault has been rectified, you can
deactivate the intelligent dosing system and dose
manually.
→ †Buttons", Page 25
The unbalance detection system has interrupted the
spin cycle due to uneven distribution of the laundry.
Redistribute the laundry in the drum.
▶
Remark:If possible, place large and small items of
laundry together in the drum. Different sized laundry
is more evenly distributed during the spin cycle.
Water pressure is low.
No solution possible.
The strainers in the water supply are clogged.
▶ Clean the strainers in the water supply.
Water tap is closed.
Advertisement
Table of Contents
