Table of Contents
Advertisement
Operation Manual / A130-H.. - A140-H..
2 Safety / 2.8 Warning plates on the turbocharger
2.8
Warning plates on the turbocharger
Warning plates are affixed at the following locations:
Fig. 6: Warning plate locations
If warning plates are not present in the designated locations or not readable, proceed as fol-
lows:
Order new warning plates from ABB Turbocharging Service Stations.
u
Remove any warning plates that have become unreadable.
u
Clean and degrease the areas designated for the warning plates.
u
Fit new warning plates and remove protective sheets.
u
Turbochargers supplied to the enginebuilder without insulation must be equipped later with
warning plates on the insulation. This is the responsibility of the enginebuilder.
© Copyright 2021 ABB. All rights reserved.
HZTL4030_EN
Rev.G
July 2021
Advertisement
Chapters
Table of Contents
