Setting Up Ix1600 / Ix1500 / Ix1400 - Fujitsu ScanSnap iX1400 Basic Operation Manual
Windows
Hide thumbs
Also See for ScanSnap iX1400:
- Advanced operation manual (109 pages) ,
- Consumable replacement and cleaning instructions (22 pages)
Table of Contents
Advertisement
Setting Up iX1600 / iX1500 / iX1400
Set up the ScanSnap so that it is ready to scan with ScanSnap Manager.
The following preparations are required before you set up the ScanSnap.
l Check that all items are included in the package
For details, refer to
l Remove the protective inner cover and tape (1) and the cardboard sheet (2) from the ScanSnap
1
The procedure to set up the ScanSnap is as follows:
1. Configuring the Settings of the ScanSnap
2. Downloading the Software
3. Installing the Software/Connecting the ScanSnap
4. Checking the Scanning Operation
1
Configuring the Settings of the ScanSnap
1. Connect the power cable to the power connector on the ScanSnap and the AC outlet.
"Package List for iX1600 / iX1500 / iX1400" (page
Use only the AC adapter and cables that are bundled with the ScanSnap.
Using other adapters and cables may cause a scanner failure.
2
Example: iX1600
22
Setting Up iX1600 / iX1500 / iX1400
27).
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
