Related Manuals for Abus EasyLook PPDF17000
Summary of Contents for Abus EasyLook PPDF17000
- Page 1 PPDF17000 / PPDF17520 Important notes and FAQs about this product and other products can be found on the website www.abus.com Version 1.0 Original operating instructions in German language. Keep for future use!
- Page 2 Dear Customer, Thank you for purchasing this product. ABUS Security Center hereby declares that the products PPDF17000 and PPDF17520 comply with the RED Directive 2014/53/EU. The device also complies with the requirements of the following EU Directives: EMC Directive 2014/30/EU and RoHS Directive 2011/65/EU. The full text of the EU Declaration of Conformity is available at the following Internet addresses: www.abus.com/product/PPDF17000...
- Page 3 ABUS Security Center shall not be liable or responsible for any direct or indirect consequential damages arising in connection with the equipment, performance, and use of this product. No warranty...
- Page 4 Replacement of the installed batteries may only be drinks on or next to the device), no foreign carried out by ABUS Technical Support! There are power supply when the power supply unit is bodies penetrate, the device is not exposed to no serviceable parts inside the device.
-
Page 5: Table Of Contents
German Content Scope of delivery ..........................6 Hardware description ........................6 2.1. PPDF17000 - PPDF17520 camera ..................6 2.2. PPDF17000 - Monitor ......................7 Description of the hardware functions ....................8 3.1. LED behavior ........................... 8 3.2. Audio transmission ........................8 3.3. -
Page 6: Scope Of Delivery
German 1. Scope of delivery PPDF17000 PPDF17520 7" EasyLook Monitor EasyLook Camera EasyLook Camera Power supply, 12V DC / 1 A (EU, UK) Power supply, 12V DC / 1 A (EU, UK) Antenna Antenna Mounting material Mounting material Quick Guide Quick Guide Drilling template Drilling template... -
Page 7: Ppdf17000 - Monitor
German 2.2. PPDF17000 - Monitor REC LED (flashes during recording) Power LED Microphone On/Off switch Antenna connector (RP-SMA)* USB interface Loudspeaker Stand Restart button microSD card slot (max. 128GB) Power supply (12V DC / 1A) *Radio frequency: 2.4 GHZ (max. transmit power 20 dBm) -
Page 8: Description Of The Hardware Functions
German 3. Description of the hardware functions 3.1. LED behavior PPDF17000 - Monitor State Description 1. monitor connected to power Lights green 2. battery is fully charged Power LED Flashing green Battery charges Flashes Battery level below 20% Lights Not in record Rec LED Flashes Recording in progress... -
Page 9: Assembly / Installation
German 4. Assembly / Installation ATTENTION! During installation, the camera must be disconnected from the mains voltage. 4.1. PPDF17000 - Monitor Fold out the stand and lock it by pushing the stand upwards. Then connect the included 12V DC / 1A power adapter. - Page 10 German Connect the power cable to the connector on the camera and feed the cables into the wall. Fasten the wall plate of the bracket with the enclosed screws. Insert the ball joint and put on the cover. The fixing ring is then screwed on a little. Now align the camera to the roughly desired coverage area and tighten the fixing ring.
-
Page 11: Teach In Camera
German 4.3. Teach camera The camera supplied in the set is already paired with the monitor at the factory. If you want to add a second camera, proceed as follows: Tap the menu icon. Tap on "Camera overview". Supply the camera with power. The camera's status LED on the front panel should now light up continuously for 10 seconds, and then flash . -
Page 12: Live Indicators
No connection If the connection is low or no connection displayed, improve connection by changing the antenna orientation of the camera and the monitor. there improvement, recommend amplifier TVAC17530: https://www.abus.com/product/TVAC175 Timestamp display Display of the current system time and date. -
Page 13: Live Menu Bar
German 6.3. Live menu bar Main menu Activate the zoom function Disable the zoom function Microphone deactivated Microphone activated Recordings Volume mute Volume low Volume medium Volume high The audio transmission always takes place only at the selected camera. To start the audio transmission of another camera, select the camera with a click. -
Page 14: Main Menu
German 6.4. Main menu Back Please note that you can leave the individual menu items with the back button in the upper left corner. Changes will be saved automatically. Recordings ▪ Playback recordings ▪ Delete recordings ▪ Filter recordings ▪ Copy back-up of recordings to USB media System settings ▪... -
Page 15: Recordings
German Manage system ▪ System information ▪ Factory settings ▪ Monitor firmware update ▪ Camera update 6.5. Recordings Select channel Select the desired camera channel for playback. Fix menu bar When this button is pressed, the menu bar is fixed during the playback of recordings. Zoom function Activate the zoom function Disable the zoom function... - Page 16 German Play previous recording Play recording Stop recording Play next recording Recordings can be fast-forwarded and rewound by moving the progress bar. Calendar to select the day Time Select Days with existing recordings are marked in red. By clicking on the arrow above, the hour selection can be expanded. The currently selected exposure is displayed in red.
-
Page 17: System Settings
German 6.6. System settings Language Select the desired language here. (English, German, French, Dutch, Italian, Danish) Time settings Here you can set the current date and time. Camera audio settings Here you can define whether the respective camera should play back and record audio. Monitor volume settings Set the playback volume of recordings here. -
Page 18: Recording Settings
German 6.7. Recording settings Recording schedule Here you can set up to 4 schedules for activating the cameras' motion detection. • To activate, the slider must be set to the right and be green • Camera: Specify which camera should be affected by the schedule •... -
Page 19: Camera Overview
German 6.8. Camera overview Delete camera Here you can disconnect connected cameras from the monitor. A manual reset of the camera using the reset button is necessary for a reconnection. Add camera Here you can add more cameras to your set. Supply the camera with power. -
Page 20: Camera Settings
German 6.9. Camera settings Monitor sirens volume Set here the siren volume of the monitor in case of a trigger. (0 = Off) Open full screen on motion When motion is detected, the triggering camera is displayed in full screen. Motion detection Switching on/off is done via the control slider ( Green = On) Alarm when triggered... - Page 21 German Areas with motion detection Here you can define the desired areas in which motion detection is desired. This helps you to minimize unwanted triggers. The areas marked in blue are the active areas. A recording is started there when triggered. Privacy zone masking A preview of the live image and the privacy zone set up...
-
Page 22: Manage System
Reset all (All data will be reset to factory settings) Monitor firmware update Here you can update the monitor, provided that a new version is available on the ABUS homepage. Download the update, unzip it and save the .rom file on a USB stick. -
Page 23: Faqs
German 7. FAQs Questions Answers What does it mean to pair Pairing establishes the exclusive, encrypted wireless monitor and camera and connection between the monitor and camera. how does it work? To connect a camera to the monitor, proceed as follows: •...