Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Abus EasyLook PPDF17000
Summary of Contents for Abus EasyLook PPDF17000
- Page 1 PPDF17000 / PPDF17100 PPDF17520 / PPDF17620 You can find important information and FAQs about this and other products online at www.abus.com Version 1.0 English translation of the original German operating instructions. Retain for future reference.
- Page 2 Dear customer, Thank you for purchasing this product. Hereby, ABUS Security Center declares that the products PPDF17000, PPDF17100, PPDF17520 and PPDF17620 are in compliance with the RED Directive 2014/53/EU. Additionally, this device complies with the requirements of the following EU directives: EMC Directive 2014/30/EU and RoHS Directive 2011/65/EU.
- Page 3 ABUS Security Center shall not be liable or responsible for any direct or indirect consequential damages arising in connection with the equipment, performance or use of this product. No guarantee...
- Page 4 Unpacking the device The installed rechargeable batteries may only be overloading electrical sockets, extension cables replaced by ABUS Technical Support. There are no Handle the device with extreme care when and adapters, as this can result in fire or electric serviceable parts inside the device.
-
Page 5: Table Of Contents
English Contents Scope of delivery ..........................6 Description of hardware ........................7 PPDF17000 – Camera PPDF17520..................7 2.1. PPDF17100 – Camera PPDF17620..................8 2.2. PPDF17000 / PPDF17100 – Monitor ..................9 2.3. Description of hardware functions ....................10 3.1. LED behaviour ........................10 3.2. -
Page 6: Scope Of Delivery
English 1. Scope of delivery PPDF17000 PPDF17520 7" EasyLook monitor EasyLook camera EasyLook camera Power supply unit, 12 V DC / 1 A (EU, UK) Power supply unit, 12 V DC / 1 A (EU, UK) Antenna Antenna Installation material Installation material Quick Guide Quick Guide... -
Page 7: Description Of Hardware
English 2. Description of hardware PPDF17000 – Camera PPDF17520 2.1. Microphone Passive Infrared Sensor (PIR) Light sensor Infrared LEDs / Status LED Lens Antenna connection (RPSMA)* Mount Loudspeaker Power supply (12V DC / 1A) Reset button *Wireless frequency: 2.4 GHz (max. transmission power 20 dBm) -
Page 8: Ppdf17100 - Camera Ppdf17620
English PPDF17100 – Camera PPDF17620 2.2. Microphone Light sensor Infrared LEDs / Status LED Lens Antenna connection (RPSMA)* Mount Loudspeaker Power supply (12V DC / 1A) Reset button *Wireless frequency: 2.4 GHz (max. transmission power 20 dBm) -
Page 9: Ppdf17000 / Ppdf17100 - Monitor
English PPDF17000 / PPDF17100 – Monitor 2.3. REC LED (flashes during recording) Power LED Microphone On/Off switch Antenna connection (RP-SMA) * USB interface Loudspeaker Stand Restart button microSD card slot (max. 128 GB) Power supply (12V DC / 1A) *Wireless frequency: 2.4 GHz (max. transmission power 20 dBm) -
Page 10: Description Of Hardware Functions
English 3. Description of hardware functions 3.1. LED behaviour PPDF17000 – Monitor Status Description 1. Monitor connected to power Lights up green 2. Battery is fully charged Power LED Flashes green Battery charging Flashes Battery level below 20% Lights up Not recording Rec LED Flashes... -
Page 11: Audio Transmission
English 3.2. Audio transmission The monitor can receive an audio signal from one camera at a time. If several cameras are paired, only the audio signal from the selected camera is played back. 3.3. Factory settings/reset The camera can be reset using the reset button on the cable. The monitor can be restarted using the restart button, but is not reset. -
Page 12: Ppdf17000 - Camera Ppdf17520
English PPDF17000 – Camera PPDF17520 4.2. First check the signal strength at your location. Hold the camera (with the antenna screwed on) as precisely as possible at the desired location: Does the monitor show a smooth live image at the desired location? If this is the case, you can continue with the installation. - Page 13 English Option 2: Surface-mounted power supply To start installation, use the drill template or unscrew the bracket to mark the required 3 drill holes with the wall plate at the desired location for the camera. Drill the 3 holes and insert the enclosed dowels.
-
Page 14: Ppdf17100 - Camera Ppdf17620
English PPDF17100 – Camera PPDF17620 4.3. First check the signal strength at your location. Hold the camera (with the antenna screwed on) as precisely as possible at the desired location: Does the monitor show a smooth live image at the desired location? If this is the case, you can continue with the installation. - Page 15 English Option 2: Surface-mounted power supply 1. Separate the wall plate of the bracket from the camera using the Allen key provided. Mark the position of the required 4 drill holes at the desired location using the drill template or the wall plate and a pencil, for example.
-
Page 16: Pairing A Camera
You should therefore first check the firmware version on your monitor: Manage system > System information > S/W version The latest version is available on the website: abus.com/products/ppdf17100 in the "Downloads" section under "Firmware" (zip file, approx. 10 MB). You will need an empty USB stick to transfer the firmware file from your PC/laptop to your... -
Page 17: Updating The Monitor Firmware
English 6. Updating the monitor firmware Attention: Do not disconnect the set monitor from the power supply during the firmware update. 1. Copy the downloaded firmware file (with the extension .rom) from your PC/laptop to an empty USB stick. 2. Plug the USB stick into the set monitor (connection on the back of the monitor). 3. -
Page 18: Local User Interface
English In order to achieve optimum performance of the person detection function, certain conditions must be observed during installation and for the camera's field of view: 1. The installation height of the camera should be chosen between 2 and 3 metres. 2. -
Page 19: Live Indicators
If there is no improvement, we recommend our TVAC17530 repeater set: www.abus.com/product/TVAC17530 Timestamp display Display of the current system time and date. Camera channel display Shows the channel number of the selected camera. -
Page 20: Live Menu Bar
English Person detection Indicates whether the person detection function has detected a person. In order for the intelligent person detection function to trigger a recording, the PIR must be triggered first and then the person detection function with the PPDF17520 (Tube). With the PPDF17620 (Outdoor PT), the software detection must be triggered first and then the person detection function in order for a recording to... - Page 21 English PPDF17100 & PPDF17620 only: Pan-tilt function Pan to the left Pan to the right Tilt downwards Tilt upwards Mirror view by 180° Save starting position, position 2 or position 3 Delete position Panning and tilting the camera lens is controlled using the arrow buttons on the screen.
-
Page 22: Main Menu
English 8.4. Main menu Back Please note that you can exit the individual menu items using the back button at the top left. Changes are saved automatically. Recordings • Playback of recordings • Delete recordings • Filter recordings • Copy back-up of recordings to USB medium System settings •... -
Page 23: Recordings
English Camera settings • Monitor siren volume • Open full screen on movement • Motion detection • Intelligent detection • Alarm when triggered • Sensitivity • Areas with motion detection • Private zone masking Manage system • System information • Factory settings •... - Page 24 English Zoom function Activate zoom function Deactivate zoom function Delete recording Back-up Create a copy of the current recording when a USB medium is connected Audio deactivated Audio activated Play previous recording Play recording Stop recording Play next recording Recordings can be fast-forwarded and rewound by moving the progress control.
-
Page 25: System Settings
English 8.6. System settings Language Select the desired language here. (English, German, French, Dutch, Italian, Danish) Time settings You can set the current date and time here. Camera audio settings Here you can specify whether the respective camera should play back and record audio. Standby mode Select after how long the screen should switch to standby mode. -
Page 26: Recording Settings
English 8.7. Recording settings Schedule Here you can define up to 4 schedules for activating motion detection of the cameras. • To activate, the slider must be set to the right position and be green • Camera: Determine which camera to which the schedule should apply •... -
Page 27: Camera Overview
English 8.8. Camera overview 12345678901 12345678901 12345678901 Delete camera You can disconnect connected cameras from the monitor here. A manual reset of the camera using the reset button is necessary for a new connection. Add camera You can add more cameras to your set here. Supply the camera with power. -
Page 28: Camera Settings
English 8.9. Camera settings Monitor siren volume Set the siren volume of the monitor in the event of triggering here. (0 = Off) Open full screen on movement If there is movement, the triggering camera is displayed in full screen. Motion detection Switching on/off takes place via the control slider (green = on). - Page 29 English Alarm when triggered Activates the siren on the monitor when motion detection is triggered. Sensitivity Here you can optimise the sensitivity of motion detection for your monitored area. You can minimise unwanted false triggering by using less sensitive levels. Areas with motion detection Here you can define the desired areas in which motion detection is desired.
-
Page 30: Manage System
Reset all (all data is reset to the factory settings). Monitor firmware update You can update the monitor here if a new version is available on the ABUS homepage. Download the update, unzip it and save the .rom file on a USB stick. -
Page 31: Faqs
English 9. FAQs Questions Answers What does pairing the monitor Pairing establishes an exclusive, encrypted wireless and camera mean and how connection between the monitor and camera. does it work? To pair a camera with the monitor, proceed as follows: •...