Table of Contents
Advertisement
Option 2: Surface-mounted power supply
1.
To start installation, use the drill template or unscrew the bracket to mark the required 3 drill
holes with the wall plate at the desired location for the camera. Drill the 3 holes and insert the
enclosed dowels. Feed the cable through one of the recesses in the wall plate. Attach the wall
plate of the bracket to the wall using the screws provided.
2.
Insert the ball joint and fit the cover. The fixing ring is then screwed on a little.
3.
Now align the camera to the roughly desired coverage area and tighten the fixing ring.
4.
Use a commercially available weatherproof installation box/junction box (width and height min.
105 mm, depth min. 35 mm) for waterproof installation. Feed the camera's cable into the box
and connect the wiring there. For weatherproof box installation, follow the installation
instructions enclosed with it.
English
Advertisement
Table of Contents
