Table of Contents
Advertisement
In order to achieve optimum performance of the person detection function, certain conditions must be
observed during installation and for the camera's field of view:
1. The installation height of the camera should be chosen between 2 and 3 metres.
2. The object height in the image section must be between 1/16 and 1/2 of the image height.
If objects in the image are shown too large or too small, they may not be detected correctly.
3. Pay attention to the vertical viewing angle of the camera as people who are located directly below
the camera, for example, cannot be detected due to this. People who can only be seen from above
in the live image may also not be detected as a person.
4. Reflective surfaces in the image section can interfere with person detection.
5. Make sure that there are no branches or leaves in the image area in the close-up range of the
camera.
6. If you do not want the camera to trigger when you are present, set up appropriate schedules.
8. Local user interface
8.1.
Operation and live display
The monitor can be operated using touch input.
Quad view:
Double-click on a channel in the quad view to display it as a full screen.
Double-click on the full screen again to switch back to the quad view.
Use the menu bar for further operation and settings.
English
Advertisement
Table of Contents
