White spots or shadow images (noise)
Check the position, direction, and connection of the aerial.
●
There may be red, blue, green and black spots on the screen
This is a characteristic of liquid crystal panels and is not a problem. The
●
liquid crystal panel is built with very high precision technology giving you
fine picture details. Occasionally, a few non-active pixels may appear on
the screen as a fixed point of red, green, blue or black. Please note this
does not affect the performance of the panel.
Shop
appears on screen at switch on
Shop
was selected in first time Auto Tuning when the TV is turned on for
●
the first time. Reset settings in
first time Auto Tuning.
Functions > Shipping Condition > Shipping Condition
Digital TV
Before requesting service or assistance, please follow these simple guides to
solve the problem.
If the problem still persists, please contact your local Panasonic dealer for
assistance.
Due to the digital reception technologies involved, quality of the Digital TV
●
signals may be relatively low in some cases, despite good reception of
Analogue TV channels.
Unable to receive signals with a high-performance aerial
Install an aerial individually for the TV and VCR (or use a splitter).
●
Interference or frozen / disappearing image in Digital TV
Check
Signal
Condition. If the level of
●
Watching > Tuning and editing channels > Signal Condition
Turn the TV off with Mains Power On / Off switch, then turn it on again.
●
Shipping
Condition, then select
Signal Quality
- 203 -
Home
in
is low, check aerial.