Table of Contents
Advertisement
Operation Manual / 4 Product description / TPS44-H.. - TPS52-H..
9 Dismantling and fitting / 9.9 Nozzle ring compression PD
9.9
Nozzle ring compression PD
For the nozzle ring (56001) to be fixed during operation, it must be clamped between the
bearing casing (42001) and the turbine casing (51000).
Fig. 28: Measuring nozzle ring compression
42001
Bearing casing
51000
Turbine casing
56001
Nozzle ring
1. Measure dimensions A, B, and C on cleaned surfaces.
2. Calculate the compression (PD) and compare it with the permissible values in the follow-
ing table.
Product
TPS44
TPS48
TPS52
Table 34: Permitted nozzle ring compression PD
If the calculated value (PD) lies outside the specified range, contact an ABB Turbochar-
u
ging Service Station.
© Copyright 2017 ABB. All rights reserved.
Compression PD [mm]
-0.23 ... 0.23
-0.23 ... 0.23
-0.24 ... 0.24
HZTL4037_EN
Revision E
July 2017
Advertisement
Chapters
Table of Contents
