Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Bosch WAVH8KL9SN
Summary of Contents for Bosch WAVH8KL9SN
- Page 1 Washing machine WAVH8KL9SN [en] User manual and installation instructions...
-
Page 2: Table Of Contents
Futher information and explanations are available online: Table of contents 1 Safety .......... 4 7 Display ........ 20 1.1 General information.... 4 8 Buttons ........ 23 1.2 Intended use....... 4 1.3 Restriction on user group... 4 9 Programmes ....... 25 1.4 Safe installation ...... 5 10 Accessories...... - Page 3 15 Intelligent dosing system .. 33 21 Customer Service..... 57 15.1 Starting the programme 21.1 Product number (E-Nr.) and with intelligent dosing sys- production number (FD).. 57 tem ......... 33 21.2 AQUA-STOP guarantee .. 58 15.2 Filling the dispensers ..... 34 22 Consumption values.... 59 15.3 Dispenser contents .... 34 15.4 Basic dosage ...... 35 23 Technical data ......
-
Page 4: Safety
en Safety 1 Safety Observe the following safety instructions. 1.1 General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. 1.2 Intended use Only use this appliance: ¡... -
Page 5: Safe Installation
Safety en 1.4 Safe installation Take note of the safety instructions when installing the appliance. WARNING ‒ Risk of electric shock! Incorrect installation is dangerous. ▶ Connect and operate the appliance only in accordance with the specifications on the rating plate. ▶ Connect the appliance to a power supply with alternating cur- rent only via a properly installed socket with earthing. - Page 6 en Safety ▶ If the power cord is too short and a longer one is not available, please contact an electrician to have the domestic installation adapted. WARNING ‒ Risk of injury! The high weight of the appliance may result in injury when lifted. ▶...
-
Page 7: Safe Use
Safety en CAUTION ‒ Risk of cutting! Touching sharp edges on the appliance may lead to cuts. ▶ Do not touch the sharp edges on the appliance. ▶ Wear protective gloves when installing and transporting the ap- pliance. 1.5 Safe use WARNING ‒ Risk of electric shock! If the appliance or the power cord is damaged, this is dangerous. - Page 8 en Safety WARNING ‒ Risk of poisoning! Detergents and care products may result in poisoning if con- sumed. ▶ If accidentally swallowed, seek medical advice. ▶ Keep detergents and care products out of the reach of children. WARNING ‒ Risk of explosion! Laundry that has been pretreated with cleaning agents that con- tain solvents may cause an explosion in the appliance.
-
Page 9: Safe Cleaning And Maintenance
Safety en 1.6 Safe cleaning and maintenance Take note of the safety instructions when cleaning and performing maintenance work on the appliance. WARNING ‒ Risk of electric shock! Incorrect repairs are dangerous. ▶ Repairs to the appliance should only be carried out by trained specialist staff. -
Page 10: Preventing Material Damage
en Preventing material damage Make sure that the valve housing ▶ 2 Preventing material for the water inlet hose does not come into contact with its sur- damage roundings and is not subjected to any external forces. Follow these instructions to avoid ma- Ensure that the inner diameter of terial damage and damage to the ap- ▶... -
Page 11: Environmental Protection And Saving Energy
Environmental protection and saving energy en Do not use cleaning products with detergent based on the laundry's de- ▶ a high alcohol content. gree of soiling. Do not use hard scouring pads or ▶ a For light to normal soiling, a smal- cleaning sponges. -
Page 12: Energy Saving Mode
en Installation and connection Open the appliance door. The appliance comes with an Aqua- → "Basic operation", Page 30 Sensor. Remove any accessories from the a During the rinse cycle, the Aqua- drum. Sensor checks the degree of tur- Close the appliance door. bidity of the rinsing water, and ad- justs the duration and number of 4.2 Contents of package... -
Page 13: Requirements For The Install- Ation Location
Installation and connection en 4.3 Requirements for the in- Installation loca- Requirements tion stallation location Wooden joist Place the appli- floor ance on a water- WARNING resistant wooden Risk of electric shock! board (minimum The appliance contains live parts. thickness of Touching live parts is dangerous. 30 mm) which is Do not operate the appliance ▶... - Page 14 en Installation and connection Pull the hoses out of the holders. Remove the 4 sleeves. Unscrew and remove Put on the 4 cover caps. screws for the 4 transit bolts with a WAF 13 wrench. Press down on the 4 cover caps. Remove the power cable from the holder.
-
Page 15: Connecting The Appliance
Installation and connection en ATTENTION! 4.5 Connecting the appliance When draining, the water outlet hose Connecting the water inlet hose is subject to water pressure and may come loose from the installed con- nection point. WARNING Secure the water outlet hose ▶ Risk of electric shock! against unintentional loosening. -
Page 16: Aligning The Appliance
en Installation and connection Screw the lock nuts tightly against 4.6 Aligning the appliance the housing using a WAF 17 In order to reduce noise and vibra- wrench. tion and to prevent the appliance from moving, align the appliance cor- rectly. Loosen the lock nuts using a WAF 17 wrench by turning it in a clock- wise direction. -
Page 17: Familiarising Yourself With Your Appliance
Familiarising yourself with your appliance en 5 Familiarising yourself with your appliance 5.1 Appliance You can find an overview of the parts of your appliance here. On certain models, specific details such as the colour and shape may differ from those pictured. Maintenance flap for the drain Water inlet hose → Page 15 pump → Page 41 Door... -
Page 18: Control Panel
en Familiarising yourself with your appliance Manual dosing compartment / : Dispenser for fabric softener or liquid detergent : Dispenser for liquid deter- gent 5.3 Control panel You can use the control panel to configure all functions of your appliance and to obtain information about the operating status. Programmes → Page 25 Programme selector → Page 30... -
Page 19: Before Using For The First Time
first time en Start the first wash cycle or press first time 6 Before using for the to switch off the appliance. → "Basic operation", Page 30 first time Prepare the appliance for use. first time 6.1 Starting an empty wash- ing cycle Your appliance was inspected thor- oughly before leaving the factory. -
Page 20: Display
en Display 7 Display The display shows the current settings, options or relevant information. Display Designation More information 0:40 Programme dura- Expected programme duration or pro- tion/programme gramme time remaining in hours and time remaining minutes. "Ready in" time → "Buttons", Page 23 Recommended The maximum load capacity for the selec- load ted programme in kg. - Page 21 Display en Display Designation More information Childproof lock ¡ lights up: The childproof lock is activ- ated. ¡ flashes: The childproof lock is activated and the appliance has been operated. → "Deactivating the childproof lock", Page 32 Energy consump- Energy consumption for the selected pro- tion gramme.
- Page 22 en Display Display Designation More information ¡ No water pressure. ¡ The water pressure is too low. Detergent drawer The detergent drawer has not been pushed in fully. E:35 / -10 Error Error code, error display, signal. Example...
-
Page 23: Buttons
Buttons en 8 Buttons The selection of programme settings depends on the programme that is set. Button Selection More information (Start/Reload/ ¡ Start Start, cancel or pause the pro- Pause) gramme. ¡ Cancel ¡ Pause ¡ Activate Activate or deactivate a shorter pro- (SpeedPerfect) gramme duration. - Page 24 en Buttons Button Selection More information - 1400 Adjust the spin speed or activate (Spin Speed Re- (Rinse Hold). duction) Set spin speed in rpm. is selected, the water is not drained at the end of the washing cycle and the spin cycle is deactiv- ated.
-
Page 25: Programmes
Programmes en 9 Programmes Note: The laundry's care labels provide you with additional information on pro- gramme selection. Programme Description Max. load (kg) Cotton Wash hard-wearing items made from cotton, linen or blended fabrics. Also suitable as a short programme for normally soiled laundry when you activate Programme setting: ¡... - Page 26 en Programmes Programme Description Max. load (kg) Easy Care Wash items made from synthetic or blended fab- rics. Programme setting: ¡ Max. 60 °C ¡ Max. 1200 rpm Wash items made from cotton, linen, or synthetic or blended fabrics. Suitable for lightly soiled laundry. Programme setting: ¡...
- Page 27 Programmes en Programme Description Max. load (kg) Programme setting: ¡ Max. 60 °C ¡ Max. 800 rpm Sport Wash sports and leisure items made from synthetic fibres, microfibre or fleece. Use a detergent that is suitable for sports items. Do not use fabric softener. Tip: Use the Easy Care programme to wash heavily soiled laundry.
-
Page 28: Laundry
en Programmes Programme Description Max. load (kg) Rapid 15'/30' Wash items made from cotton, or synthetic or blen- ded fabrics. Short programme for small items of lightly soiled laundry. The programme duration is approx. 30 minutes. If you wish to reduce the programme duration to 15 minutes, activate . -
Page 29: Preparing The Laundry
QR code in the table of bag. contents or on www.bosch- home.com. – Tie together longer drawstrings, and tie cords with solid end- 11.1 Preparing the laundry pieces in hoods or trousers –... -
Page 30: Detergents And Care
¡ You can find further information in ance the digital instruction manual by Requirement: The appliance has scanning the QR code in the table been correctly installed and connec- of contents or on www.bosch- ted. home.com. → "Installation and connection", ¡ Observe the information on safety Page 12 → Page 4 and preventing material... -
Page 31: Loading Laundry
operation en Notes 13.6 Starting the programme ¡ The programme settings are not Requirement: A programme is set. saved permanently for the pro- → "Setting a programme", Page 30 gramme. ¡ The setting is saved if you activate Press ▶ or deactivate the intelligent dosing a The drum rotates and load detec- system. -
Page 32: Cancelling The Programme
en Childproof lock Wipe the rubber gasket dry and re- 13.9 Cancelling the pro- move any foreign objects. gramme Press Open the appliance door. The appliance door remains locked for safety reasons if the temperature and water levels are high. – If the temperature is high, start the Rinse programme. -
Page 33: Intelligent Dosing System
Intelligent dosing system en So that the programme currently ¡ Activate the intelligent dosing sys- running is not cancelled, the pro- tem once the programme has gramme selector must be set to ended. the initial programme. → "Buttons", Page 23 goes out in the display. Requirements ¡... -
Page 34: Filling The Dispensers
en Intelligent dosing system Pour liquid detergent and fabric 15.2 Filling the dispensers softener into the relevant dis- If you want to use the intelligent dos- pensers. ing system or if the appliance dis- → "Detergent drawer", Page 17 plays a notification during operation of the appliance, fill the dispensers. -
Page 35: Basic Dosage
Home Connect. in the digital instruction manual by scanning the QR code in the table of The Home Connect app guides contents or on www.bosch- you through the entire login pro- home.com. cess. The Home Connect services are not available in every country. -
Page 36: Setting Up Home Connect
en Home Connect 16.2 Setting up Home Con- 16.4 Deactivating Wi-Fi on the nect appliance Press and hold for at least Requirements ¡ The Home Connect app has been three seconds. installed on your mobile device. Set the programme to position 4. ¡ Wi-Fi has been activated on the a The display shows Con. -
Page 37: Remote Diagnostics
Home Connect en ¡ Remote start cannot be activated 16.8 Data protection for safety reasons in the following Please see the information on data circumstances: protection. – The appliance door is open. The first time your appliance is – The detergent drawer has not registered on a home network been pushed in fully. -
Page 38: Basic Settings
en Basic settings 17 Basic settings You can configure the basic settings for your appliance to meet your needs. 17.1 Overview of basic settings Basic setting Programme posi- Value Description tion End signal 0 (off) Set the volume of 1 (quiet) the signal at the 2 (medium) end of the pro- 3 (loud) -
Page 39: Changing The Basic Set- Tings
▶ in the digital instruction manual by on the rear against water, deter- scanning the QR code in the table of gent and fabric softener residue. contents or on www.bosch- Switch off the appliance. home.com. → "Switching off the appliance", Page 32... - Page 40 en Cleaning and servicing Press down on the insert and re- Empty the detergent drawer. move the detergent drawer. Clean the pump unit with a damp Remove the pump unit. cloth. Unclip the detergent drawer cover Clean the detergent drawer and and remove it.
-
Page 41: Cleaning The Drain Pump
Cleaning and servicing en Disconnect the appliance's mains plug from the power supply. Open and remove the service flap. Slide a sufficiently large container under the opening. Clean the housing of the detergent drawer in the appliance. Take the drain hose out of the holder. - Page 42 en Cleaning and servicing Cleaning the drain pump CAUTION - Risk of scalding! When you wash at high temperat- Requirement: The drain pump is ures, the detergent solution gets empty. → Page 41 hot. Since water may remain in the Do not touch the hot detergent ▶...
-
Page 43: Cleaning The Intake Opening In The Rubber Gasket
Cleaning and servicing en Ensure that both impellers can Insert and close the service flap. turn. 18.4 Cleaning the intake Insert the pump cap. opening in the rubber Ensure that the parts of the ‒ pump cap are correctly as- gasket sembled. Regularly check the intake opening in the rubber gasket for any block- ages and clean the intake opening. -
Page 44: Troubleshooting
en Troubleshooting 19 Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶... - Page 45 Troubleshooting en Fault Cause and troubleshooting "E:30 / -80" Unapproved extension installed on the water drain hose. Remove any unapproved extensions from the water ▶ hose. → "Connecting the appliance", Page 15 The pump cap is not fully screwed in. Ensure that the pump cap is screwed in all the way ▶...
- Page 46 en Troubleshooting Fault Cause and troubleshooting "E:30 / -10" and/or The tap is turned off. Turn on the tap. ▶ The water inlet hose is kinked or jammed. Ensure that the water inlet hose is not kinked or ▶ jammed. Water level measurement system is defective. Note: With the error message, the appliance starts a draining process.
- Page 47 Troubleshooting en Fault Cause and troubleshooting Detergent dosage is too high. Immediate measure: Mix one tablespoon of fabric ▶ softener with 0.5 litres of water and pour the mix- ture into the compartment for manual dosing (not for outdoor clothing, sportswear or items stuffed with down).
- Page 48 en Troubleshooting Fault Cause and troubleshooting The appliance is not There has been a power cut. working. Check whether the lighting in your kitchen or other ▶ appliances are working. The programme does You have not pressed not start. Press ▶ Door is not closed.
- Page 49 Troubleshooting en Fault Cause and troubleshooting The door cannot The temperature is too high. be opened. Wait until the temperature has dropped. ▶ → "Cancelling the programme", Page 32 ▶ Water level is too high. Select a suitable programme for draining. ▶ → "Programmes", Page 25 Power failure.
- Page 50 en Troubleshooting Fault Cause and troubleshooting The water is not drain- Remove any unapproved extensions from the water ▶ ing. hose. → "Connecting the appliance", Page 15 The pump cap is not fully screwed in. Ensure that the pump cap is screwed in all the way ▶...
- Page 51 Troubleshooting en Fault Cause and troubleshooting Drum jerks after the This is caused by an internal motor test. programme starts. Not a fault – no action required. ▶ Vibrations and move- Appliance is not correctly aligned. ment of the appliance → "Aligning the appliance", Page 16 ▶...
- Page 52 en Troubleshooting Fault Cause and troubleshooting The spin programme Drain pipe or water outlet hose is blocked. does not start. Clean the drain pipe and the water outlet hose. ▶ Drain pipe or water drain hose is caught or jammed. Ensure that the drain pipe and water drain hose are ▶...
- Page 53 Troubleshooting en Fault Cause and troubleshooting Creasing. The next time you run a wash cycle, reduce the ▶ amount of laundry being loaded. Unsuitable programme for the type of fabric. Select the programmes that are suitable for the ▶ type of fabric. The spin result is not A low spin speed is selected.
- Page 54 en Troubleshooting Fault Cause and troubleshooting Detergent residue on Refill the dispenser. the damp washing. → "Filling the dispensers", Page 34 Basic dosage is not correctly adjusted. If intelligent dosing is activated, reduce the basic ▶ dosage → Page 35. Detergent residue on Detergents may contain water-insoluble substances the dry laundry.
- Page 55 Troubleshooting en Fault Cause and troubleshooting Home Connect is not Different causes are possible. working properly. Go to www.home-connect.com. ▶ No connection to the Wi-Fi is switched off. home network. → "Activating Wi-Fi on the appliance", Page 36. ▶ Wi-Fi is activated but a connection to your home net- work cannot be established.
-
Page 56: Emergency Release
→ "Installation and connection", in the digital instruction manual by Page 12 and scanning the QR code in the table of → "Starting an empty washing contents or on www.bosch- home.com. cycle", Page 19. Turn off the tap. Empty the water inlet hose. Switch off the appliance. -
Page 57: Disposing Of Old Appliance
Customer Service en 20.4 Disposing of old appli- 21 Customer Service ance Function-relevant genuine spare parts Valuable raw materials can be re- according to the corresponding Eco- used by recycling. design Order can be obtained from Customer Service for a period of at WARNING least 10 years from the date on Risk of harm to health! -
Page 58: Aqua-Stop Guarantee
en Customer Service 21.2 AQUA-STOP guarantee In addition to warranty claims against the seller under the purchase agree- ment and in addition to our manufac- turer's warranty, we offer compensa- tion under the following conditions. ¡ If our Aqua-Stop system is defect- ive and causes water damage, we will make good the damage for private users. -
Page 59: Consumption Values
Consumption values en 22 Consumption values The following information is provided in accordance with the EU Ecodesign Regulation. The values given for programs other than the Eco 40-60 are indicat- ive only and were determined in accordance with the applicable standard EN60456. The automatic dosing function has been deactivated for this pur- pose. - Page 60 Length of the 210 cm A detailed Declaration of Conformity power cord can be found online at www.bosch- home.co.uk among the additional This product contains light sources documents on the product page for from energy efficiency class F. These your appliance.
-
Page 61: Declaration Of Conformity
Declaration of Conformity en 2.4 GHz band (2400–2483.5 MHz): 5 GHz band (5150–5350 MHz + Max. 100 mW 5470–5725 MHz): Max. 100 mW UK (NI) 5 GHz WLAN (Wi-Fi): For indoor use only. 5 GHz WLAN (Wi-Fi): For indoor use only. - Page 64 Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service direct- ory.