Table of Contents
Advertisement
Before using the oven for the first time
In this section, you can find out what you must do before using
your oven or gas hob to prepare food for the first time. First
read the section on Safety information.
Heating up the oven
To remove the new cooker smell, heat up the oven when it is
empty and closed. Ensure that no packaging material has been
left in the cooking compartment.
Setting procedure for the lower gas burner
Example in the picture: Heat at 270 °C
Open the top cover. The top cover must remain open for as
1.
long as the oven is in operation.
Open the main gas supply to the appliance. Connect the plug
2.
in the socket. Open the oven door.
Push in the switch for the lower gas burner and turn it to
3.
270 °C.
While holding the switch for the oven's lower gas burner
4.
depressed, press the ignition button
The gas escaping from the oven's lower gas burner is ignited
5.
using the ignition button. To activate the safety pilot, press
and hold the lower gas burner on the oven for 10 seconds.
Look through the inspection port to make sure that the flame
6.
is lit. If it is not, repeat the process from step 3.
Close the oven door slowly.
7.
Turn off the switch for the lower gas burner after 30 minutes.
8.
How to set the gas grill
Open the top cover. The top cover must remain open for as
1.
long as the oven is in operation.
Open the main gas supply to the appliance. Connect the plug
2.
to the socket.
Insert the protective plate into the groove under the control
3.
panel.
The protective plate is inserted with the longer edge at the
front with the elbow pointing downwards.
Secure the protective plate in the groove underneath the
control panel using the retainers.
Make sure that the protective plate is engaged in the
retainers. If the protective plate cannot be pulled out, it is
12
8
.
correctly engaged. You can now use the protective plate
safely. Otherwise, insert the protective plate into a groove at a
slightly higher angle and make sure that it engages in the
retainers.
Close the oven door so that it touches the protective plate.
4.
Press the function selector and turn it clockwise to the
5.
grill setting.
Keeping the function selector pressed, push the
6.
button.
The gas escaping from the gas grill is ignited using the
7.
ignition button. To activate the safety ignition, press and hold
the function selector for 10 seconds.
Check that the flame is lit. If it is not, repeat the process from
8.
step 5.
After 30 minutes, switch off the function selector. Once the
9.
oven has cooled down, remove the protective plate again.
Cleaning the accessories
Before you use the accessories for the first time, clean them
thoroughly with hot soapy water and a soft dish cloth.
Advance cleaning of burner cup and cap
Clean the burner cap (1) and cup (2) with water and washing-
up liquid. Dry the individual parts carefully.
Place the burner cup and cap back on the burner shell (5).
Ensure that the igniter (3) and flame safety pin (4) are not
damaged.
The nozzle (6) must be dry and clean. Always position the
burner cap exactly over the burner cup.
(
8
ignition
Advertisement
Table of Contents
