Channel Status Led; Pwr Led; Interrupts - Siemens SIMATIC ET 200SP HA Equipment Manual
Hide thumbs
Also See for SIMATIC ET 200SP HA:
- System manual (186 pages) ,
- Compact operating instructions (182 pages) ,
- Original instructions manual (165 pages)
Table of Contents
Advertisement
7.2.3
Channel status LED
Definition
The green LED channel status shows the signal level at the input terminal.
Description
The channel status LED indicates the following statuses:
LED channel status Meaning
7.2.4
PWR LED
Definition
The PWR LED provides you status information about supply voltage L+.
Description
The PWR LED indicates the following status:
7.3
Interrupts
Definition
A diagnostic interrupt is an alarm that reports activated events of a device status to the system
operator with the appropriate operator authorization (maintenance and service).
DQ 32x24VDC/0.5A HA
Equipment Manual, 08/2019, A5E48262762-AB
•
Process signal = 0 or channel disabled
Off
•
Module has been switched off
•
Module or channel diagnostics pending
Channel enabled and process signal = 1 (no channel diagnostics / module diag‐
nostics pending)
On
PWR LED
Meaning
Supply voltage L+ missing.
Off
Supply voltage L+ present.
On
Displays and interrupts
7.3 Interrupts
25
Advertisement
Table of Contents
